# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!

auto lo
iface lo inet loopback

auto eno1
iface eno1 inet manual
	mtu 9000

auto eno2
iface eno2 inet static

auto bond0
iface bond0 inet static
	bond-slaves none
	bond-miimon 100
	bond-mode balance-rr

	HOST=

auto vlan10
iface vlan10 inet static
	vlan_raw_device bond0

auto vmbr0
iface vmbr0 inet static
	address 192.168.1.68/24
	gateway 192.168.1.110
	bridge-ports eno1
	bridge-stp off
	bridge-fd 0
	mtu 9000
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"

auto vmbr1
iface vmbr1 inet static
	bridge-ports none
	bridge-stp off
	bridge-fd 0

	HOST=

auto vmbr2
iface vmbr2 inet static
	address 192.168.3.100/24
	bridge-ports eno2
	bridge-stp off
	bridge-fd 0
	bridge_bridge_options "stp_state 0"
	bridge_bridge_options "stp_state 0"

