smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.207-std-def-alt1] (ALT Sisyphus 7.2-alt1)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HFS128G32TNF-N3A0A
Serial Number:    MS82N160411402K2I
Firmware Version: 70000P10
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb  7 16:39:00 2024 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  109) seconds.
Offline data collection
capabilities: 			 (0x51) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  20) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   166   166   006    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0032   253   253   036    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       22193
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       1422
100 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1579729
168 Unknown_Attribute       0x0032   097   097   000    Old_age   Always       -       63
169 Unknown_Attribute       0x0032   092   092   000    Old_age   Always       -       153
171 Unknown_Attribute       0x0032   253   253   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   253   253   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0032   094   094   000    Old_age   Always       -       109
174 Unknown_Attribute       0x0030   100   100   000    Old_age   Offline      -       112
175 Program_Fail_Count_Chip 0x0032   253   253   000    Old_age   Always       -       0
176 Erase_Fail_Count_Chip   0x0032   253   253   000    Old_age   Always       -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   253   253   000    Old_age   Always       -       0
179 Used_Rsvd_Blk_Cnt_Tot   0x0032   253   253   000    Old_age   Always       -       0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   100   100   010    Pre-fail  Always       -       100
184 End-to-End_Error        0x0032   253   253   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   253   253   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   031   016   000    Old_age   Always       -       31 (Min/Max 16/43)
195 Hardware_ECC_Recovered  0x0032   253   253   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   253   253   036    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0032   253   253   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   253   253   000    Old_age   Always       -       0
212 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       7024
233 Media_Wearout_Indicator 0x0033   094   094   001    Pre-fail  Always       -       94
236 Unknown_Attribute       0x0032   045   045   001    Old_age   Always       -       45
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       22401
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       7396
249 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       14866

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3887         -

Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

