smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.6.16-un-def-alt2] (ALT Sisyphus 7.2-alt1)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     SAMSUNG MZNLN128HAHQ-000H1
Serial Number:    S3T8NE0K904595
LU WWN Device Id: 5 002538 d00873477
Firmware Version: MVT23H3Q
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
TRIM Command:     Available, deterministic, zeroed
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 28 09:46:40 2024 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 3840) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  64) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       12437
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1782
171 Program_Fail_Count_Chip 0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count_Chip   0x0032   100   100   000    Old_age   Always       -       0
173 Wear_Leveling_Count     0x0032   090   090   005    Old_age   Always       -       121
174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       443
176 Erase_Fail_Count_Chip   0x0022   100   100   000    Old_age   Always       -       316
181 Program_Fail_Cnt_Total  0x0022   099   065   000    Old_age   Always       -       350372
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       1
184 End-to-End_Error        0x003b   100   100   097    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   030   049   000    Old_age   Always       -       30 (Min/Max 26/40)
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 CRC_Error_Count         0x0032   100   100   000    Old_age   Always       -       11
201 Supercap_Status         0x0023   100   100   005    Pre-fail  Always       -       100
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       589886
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       451687
243 SATA_Downshift_Ct       0x0032   100   100   000    Old_age   Always       -       589886

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      6972         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was completed without error
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

