[    0.000000] microcode: microcode updated early to revision 0xfc, date = 2024-02-05
[    0.000000] Linux version 6.1.111-un-def-alt1 (builder@localhost.localdomain) (gcc-10 (GCC) 10.3.1 20210703 (ALT Sisyphus 10.3.1-alt2), GNU ld (GNU Binutils) 2.35.2.20210110) #1 SMP PREEMPT_DYNAMIC Tue Oct  1 14:50:40 UTC 2024
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-un-def root=UUID=a0ccbdd7-ce3c-4243-a8cb-3adfea38c17a ro rootflags=subvol=@ resume=/dev/disk/by-uuid/37847114-d301-438c-87d7-d91efbd1bfc3 panic=30 quiet loglevel=3 splash psi=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e4cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e4d0000-0x000000007e5fbfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007e5fc000-0x000000008ef9bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ef9c000-0x000000008fb53fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008fb54000-0x000000008fc4dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008fc4e000-0x000000008fc4efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fc4f000-0x000000009b7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002627fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by Phoenix Technologies Ltd.
[    0.000000] efi: SMBIOS=0x80539000 SMBIOS 3.0=0x8052c000 TPMFinalLog=0x8fa1c000 ACPI=0x8fc4d000 ACPI 2.0=0x8fc4d014 ESRT=0x7eda9000 
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: LENOVO 20RW/LVA/LVAB, BIOS CJCN26WW 02/15/2020
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.000000] tsc: Detected 2599.992 MHz TSC
[    0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000015] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000023] last_pfn = 0x262800 max_arch_pfn = 0x400000000
[    0.000246] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001243] last_pfn = 0x8fc4f max_arch_pfn = 0x400000000
[    0.013063] esrt: Reserving ESRT space from 0x000000007eda9000 to 0x000000007eda9038.
[    0.013077] Using GB pages for direct mapping
[    0.013622] Secure boot disabled
[    0.013623] RAMDISK: [mem 0x35577000-0x36ab2fff]
[    0.013629] ACPI: Early table checksum verification disabled
[    0.013633] ACPI: RSDP 0x000000008FC4D014 000024 (v02 LENOVO)
[    0.013638] ACPI: XSDT 0x000000008FC4B188 00010C (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013645] ACPI: FACP 0x00000000803EB000 000114 (v06 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013652] ACPI: DSDT 0x00000000803A5000 042CEA (v02 LENOVO CFL      20170001 INTL 20160422)
[    0.013656] ACPI: FACS 0x000000008F9E3000 000040
[    0.013660] ACPI: SSDT 0x000000008043D000 001B4A (v02 LENOVO CpuSsdt  00003000 INTL 20160527)
[    0.013664] ACPI: SSDT 0x00000000803F2000 005E02 (v02 LENOVO DptfTabl 00001000 INTL 20160527)
[    0.013668] ACPI: SSDT 0x00000000803ED000 003145 (v02 LENOVO SaSsdt   00003000 INTL 20160527)
[    0.013672] ACPI: SSDT 0x00000000803EC000 000530 (v02 LENOVO PerfTune 00001000 INTL 20160527)
[    0.013676] ACPI: HPET 0x00000000803EA000 000038 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013680] ACPI: APIC 0x00000000803E9000 000164 (v03 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013683] ACPI: MCFG 0x00000000803E8000 00003C (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013687] ACPI: SSDT 0x00000000803A3000 00147B (v02 LENOVO Ther_Rvp 00001000 INTL 20160527)
[    0.013691] ACPI: SSDT 0x000000008039F000 00326F (v02 LENOVO xh_cmud4 00000000 INTL 20160527)
[    0.013695] ACPI: NHLT 0x000000008039E000 00002D (v00 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013699] ACPI: BOOT 0x000000008039D000 000028 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.013703] ACPI: SSDT 0x000000008039C000 00045A (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
[    0.013707] ACPI: SSDT 0x000000008039B000 000046 (v02 LENOVO MeSsdt   00003000 INTL 20160527)
[    0.013711] ACPI: TPM2 0x000000008039A000 000034 (v03 LENOVO CB-01    00000002 PTEC 00000002)
[    0.013714] ACPI: SSDT 0x0000000080396000 001516 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
[    0.013718] ACPI: LPIT 0x0000000080395000 000094 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013722] ACPI: WSMT 0x0000000080394000 000028 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013726] ACPI: SSDT 0x0000000080391000 002720 (v02 LENOVO PtidDevc 00001000 INTL 20160527)
[    0.013730] ACPI: SSDT 0x000000008038F000 00149F (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
[    0.013734] ACPI: DBGP 0x000000008038E000 000034 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013737] ACPI: DBG2 0x000000008038D000 000054 (v00 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013741] ACPI: POAT 0x000000008038C000 000055 (v03 LENOVO CB-01    00000000 PTEC 00000002)
[    0.013745] ACPI: SLIC 0x000000008038B000 000176 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.013749] ACPI: BATB 0x00000000801AD000 00004A (v02 LENOVO CB-01    00000000 PTEC 00000002)
[    0.013753] ACPI: DMAR 0x000000007EDAB000 0000A8 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.013756] ACPI: BGRT 0x000000007EDA8000 000038 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013760] ACPI: UEFI 0x000000008F9D5000 00013E (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.013764] ACPI: FPDT 0x000000007EDA7000 000044 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.013767] ACPI: Reserving FACP table memory at [mem 0x803eb000-0x803eb113]
[    0.013769] ACPI: Reserving DSDT table memory at [mem 0x803a5000-0x803e7ce9]
[    0.013771] ACPI: Reserving FACS table memory at [mem 0x8f9e3000-0x8f9e303f]
[    0.013772] ACPI: Reserving SSDT table memory at [mem 0x8043d000-0x8043eb49]
[    0.013773] ACPI: Reserving SSDT table memory at [mem 0x803f2000-0x803f7e01]
[    0.013774] ACPI: Reserving SSDT table memory at [mem 0x803ed000-0x803f0144]
[    0.013775] ACPI: Reserving SSDT table memory at [mem 0x803ec000-0x803ec52f]
[    0.013777] ACPI: Reserving HPET table memory at [mem 0x803ea000-0x803ea037]
[    0.013778] ACPI: Reserving APIC table memory at [mem 0x803e9000-0x803e9163]
[    0.013779] ACPI: Reserving MCFG table memory at [mem 0x803e8000-0x803e803b]
[    0.013780] ACPI: Reserving SSDT table memory at [mem 0x803a3000-0x803a447a]
[    0.013781] ACPI: Reserving SSDT table memory at [mem 0x8039f000-0x803a226e]
[    0.013782] ACPI: Reserving NHLT table memory at [mem 0x8039e000-0x8039e02c]
[    0.013784] ACPI: Reserving BOOT table memory at [mem 0x8039d000-0x8039d027]
[    0.013785] ACPI: Reserving SSDT table memory at [mem 0x8039c000-0x8039c459]
[    0.013786] ACPI: Reserving SSDT table memory at [mem 0x8039b000-0x8039b045]
[    0.013787] ACPI: Reserving TPM2 table memory at [mem 0x8039a000-0x8039a033]
[    0.013789] ACPI: Reserving SSDT table memory at [mem 0x80396000-0x80397515]
[    0.013790] ACPI: Reserving LPIT table memory at [mem 0x80395000-0x80395093]
[    0.013791] ACPI: Reserving WSMT table memory at [mem 0x80394000-0x80394027]
[    0.013792] ACPI: Reserving SSDT table memory at [mem 0x80391000-0x8039371f]
[    0.013793] ACPI: Reserving SSDT table memory at [mem 0x8038f000-0x8039049e]
[    0.013795] ACPI: Reserving DBGP table memory at [mem 0x8038e000-0x8038e033]
[    0.013796] ACPI: Reserving DBG2 table memory at [mem 0x8038d000-0x8038d053]
[    0.013797] ACPI: Reserving POAT table memory at [mem 0x8038c000-0x8038c054]
[    0.013798] ACPI: Reserving SLIC table memory at [mem 0x8038b000-0x8038b175]
[    0.013800] ACPI: Reserving BATB table memory at [mem 0x801ad000-0x801ad049]
[    0.013801] ACPI: Reserving DMAR table memory at [mem 0x7edab000-0x7edab0a7]
[    0.013802] ACPI: Reserving BGRT table memory at [mem 0x7eda8000-0x7eda8037]
[    0.013803] ACPI: Reserving UEFI table memory at [mem 0x8f9d5000-0x8f9d513d]
[    0.013805] ACPI: Reserving FPDT table memory at [mem 0x7eda7000-0x7eda7043]
[    0.013987] No NUMA configuration found
[    0.013988] Faking a node at [mem 0x0000000000000000-0x00000002627fffff]
[    0.014001] NODE_DATA(0) allocated [mem 0x2627de000-0x2627fffff]
[    0.014345] Zone ranges:
[    0.014346]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014349]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.014351]   Normal   [mem 0x0000000100000000-0x00000002627fffff]
[    0.014353] Movable zone start for each node
[    0.014357] Early memory node ranges
[    0.014358]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.014360]   node   0: [mem 0x0000000000100000-0x000000007e4cffff]
[    0.014361]   node   0: [mem 0x000000008fc4e000-0x000000008fc4efff]
[    0.014363]   node   0: [mem 0x0000000100000000-0x00000002627fffff]
[    0.014365] Initmem setup node 0 [mem 0x0000000000001000-0x00000002627fffff]
[    0.014371] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.014406] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.024549] On node 0, zone DMA32: 38782 pages in unavailable ranges
[    0.051989] On node 0, zone Normal: 945 pages in unavailable ranges
[    0.052421] On node 0, zone Normal: 22528 pages in unavailable ranges
[    0.052440] Reserving Intel graphics memory at [mem 0x99800000-0x9b7fffff]
[    0.053014] ACPI: PM-Timer IO Port: 0x1808
[    0.053023] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.053026] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.053027] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.053028] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.053029] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.053030] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.053031] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.053032] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.053033] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.053034] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.053035] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.053036] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.053037] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.053038] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.053039] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.053040] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.053041] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.053042] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.053043] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.053044] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.053103] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.053107] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053110] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053116] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.053117] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.053126] e820: update [mem 0x79cd4000-0x79dc7fff] usable ==> reserved
[    0.053145] TSC deadline timer available
[    0.053146] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.053162] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053165] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.053168] PM: hibernation: Registered nosave memory: [mem 0x79cd4000-0x79dc7fff]
[    0.053171] PM: hibernation: Registered nosave memory: [mem 0x7e4d0000-0x7e5fbfff]
[    0.053171] PM: hibernation: Registered nosave memory: [mem 0x7e5fc000-0x8ef9bfff]
[    0.053172] PM: hibernation: Registered nosave memory: [mem 0x8ef9c000-0x8fb53fff]
[    0.053173] PM: hibernation: Registered nosave memory: [mem 0x8fb54000-0x8fc4dfff]
[    0.053176] PM: hibernation: Registered nosave memory: [mem 0x8fc4f000-0x9b7fffff]
[    0.053176] PM: hibernation: Registered nosave memory: [mem 0x9b800000-0xffffffff]
[    0.053179] [mem 0x9b800000-0xffffffff] available for PCI devices
[    0.053180] Booting paravirtualized kernel on bare hardware
[    0.053184] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.060735] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.061008] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[    0.061023] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[    0.061031] pcpu-alloc: [0] 0 1 2 3 
[    0.061069] Fallback order for Node 0: 0 
[    0.061073] Built 1 zonelists, mobility grouping on.  Total pages: 1938333
[    0.061075] Policy zone: Normal
[    0.061076] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-un-def root=UUID=a0ccbdd7-ce3c-4243-a8cb-3adfea38c17a ro rootflags=subvol=@ resume=/dev/disk/by-uuid/37847114-d301-438c-87d7-d91efbd1bfc3 panic=30 quiet loglevel=3 splash psi=1
[    0.061213] Unknown kernel command line parameters "splash BOOT_IMAGE=/@/boot/vmlinuz-un-def", will be passed to user space.
[    0.062254] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.062815] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.062881] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.062894] software IO TLB: area num 4.
[    0.132346] Memory: 7513388K/7877052K available (14343K kernel code, 2588K rwdata, 9376K rodata, 3004K init, 16544K bss, 363404K reserved, 0K cma-reserved)
[    0.132514] ftrace: allocating 43508 entries in 170 pages
[    0.143419] ftrace: allocated 170 pages with 4 groups
[    0.144482] Dynamic Preempt: voluntary
[    0.144513] rcu: Preemptible hierarchical RCU implementation.
[    0.144514] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.144516] 	Trampoline variant of Tasks RCU enabled.
[    0.144517] 	Rude variant of Tasks RCU enabled.
[    0.144518] 	Tracing variant of Tasks RCU enabled.
[    0.144519] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.144520] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.150779] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.151071] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.151781] Console: colour dummy device 80x25
[    0.151807] printk: console [tty0] enabled
[    0.151849] ACPI: Core revision 20220331
[    0.152363] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.152365] APIC: Switch to symmetric I/O mode setup
[    0.152367] DMAR: Host address width 39
[    0.152368] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.152378] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.152382] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.152387] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.152389] DMAR: RMRR base: 0x0000008ef57000 end: 0x0000008ef76fff
[    0.152392] DMAR: RMRR base: 0x00000099000000 end: 0x0000009b7fffff
[    0.152395] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.152397] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.152398] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.155385] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.155388] x2apic enabled
[    0.155417] Switched APIC routing to cluster x2apic.
[    0.160988] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
[    0.160996] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=2599992)
[    0.161040] CPU0: Thermal monitoring enabled (TM1)
[    0.161096] process: using mwait in idle threads
[    0.161099] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.161100] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.161105] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.161108] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit
[    0.161109] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall
[    0.161110] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.161111] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.161112] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.161112] RETBleed: Mitigation: Enhanced IBRS
[    0.161114] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.161117] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.161121] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.161126] SRBDS: Mitigation: Microcode
[    0.161133] GDS: Mitigation: Microcode
[    0.161140] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.161142] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.161143] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.161144] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.161145] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.161147] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.161149] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.161150] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.161151] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.161993] Freeing SMP alternatives memory: 40K
[    0.161993] pid_max: default: 32768 minimum: 301
[    0.161993] LSM: Security Framework initializing
[    0.161993] landlock: Up and running.
[    0.161993] Yama: becoming mindful.
[    0.161993] LSM support for eBPF active
[    0.161993] AltHa disabled.
[    0.161993] Kiosk: Netlink family registered.
[    0.161993] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.161993] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.161993] smpboot: CPU0: Intel(R) Core(TM) i3-10110U CPU @ 2.10GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.161993] cblist_init_generic: Setting adjustable number of callback queues.
[    0.161993] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.161993] cblist_init_generic: Setting adjustable number of callback queues.
[    0.161993] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.161993] cblist_init_generic: Setting adjustable number of callback queues.
[    0.161993] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.161993] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.161993] ... version:                4
[    0.161993] ... bit width:              48
[    0.161993] ... generic registers:      4
[    0.161993] ... value mask:             0000ffffffffffff
[    0.161993] ... max period:             00007fffffffffff
[    0.161993] ... fixed-purpose events:   3
[    0.161993] ... event mask:             000000070000000f
[    0.161993] signal: max sigframe size: 2032
[    0.161993] Estimated ratio of average max frequency by base frequency (times 1024): 1457
[    0.161993] rcu: Hierarchical SRCU implementation.
[    0.161993] rcu: 	Max phase no-delay instances is 400.
[    0.162086] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.162198] smp: Bringing up secondary CPUs ...
[    0.162366] x86: Booting SMP configuration:
[    0.162368] .... node  #0, CPUs:      #1 #2
[    0.164184] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.164209]  #3
[    0.165219] smp: Brought up 1 node, 4 CPUs
[    0.165219] smpboot: Max logical packages: 1
[    0.165219] ----------------
[    0.165219] | NMI testsuite:
[    0.165219] --------------------
[    0.165219]   remote IPI:  ok  |
[    0.165219]    local IPI:  ok  |
[    0.165219] --------------------
[    0.165219] Good, all   2 testcases passed! |
[    0.165219] ---------------------------------
[    0.165219] smpboot: Total of 4 processors activated (20799.93 BogoMIPS)
[    0.166421] devtmpfs: initialized
[    0.166421] x86/mm: Memory block size: 128MB
[    0.167438] ACPI: PM: Registering ACPI NVS region [mem 0x8ef9c000-0x8fb53fff] (12288000 bytes)
[    0.167438] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.167438] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.167438] pinctrl core: initialized pinctrl subsystem
[    0.168796] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.168933] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.168942] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.168949] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.168960] audit: initializing netlink subsys (disabled)
[    0.169002] audit: type=2000 audit(1728457432.008:1): state=initialized audit_enabled=0 res=1
[    0.169139] thermal_sys: Registered thermal governor 'fair_share'
[    0.169141] thermal_sys: Registered thermal governor 'bang_bang'
[    0.169142] thermal_sys: Registered thermal governor 'step_wise'
[    0.169143] thermal_sys: Registered thermal governor 'user_space'
[    0.169154] cpuidle: using governor ladder
[    0.169158] cpuidle: using governor menu
[    0.169214] Simple Boot Flag at 0x47 set to 0x1
[    0.169214] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.169214] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.169214] PCI: not using MMCONFIG
[    0.169214] PCI: Using configuration type 1 for base access
[    0.169361] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.170998] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.171071] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.171071] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.171071] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.171071] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.171293] ACPI: Added _OSI(Module Device)
[    0.171293] ACPI: Added _OSI(Processor Device)
[    0.171293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.171293] ACPI: Added _OSI(Processor Aggregator Device)
[    0.224863] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.224872] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.224876] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.224880] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.224884] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.224886] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.224889] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.224893] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.224895] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.224898] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.224902] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.224904] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.224930] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.224935] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.224937] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.224939] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.224943] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.224946] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.226729] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.226734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.226736] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.226739] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.226743] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.226745] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.228519] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.228524] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.228527] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.228529] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.228533] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.228535] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.230307] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.230312] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.230314] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.230317] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.230321] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.230323] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.232865] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.232870] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.232873] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.232875] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.232879] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.232881] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.234652] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.234657] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.234659] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.234662] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.234666] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.234668] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.238204] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.238209] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.238211] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.238214] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.238217] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.238219] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.239867] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.239871] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.239874] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.239876] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.239880] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.239882] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.241652] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.241657] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.241659] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.241662] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.241666] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.241668] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243515] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243520] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243522] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243525] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243529] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243531] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243559] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243563] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243565] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243568] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243571] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243574] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243601] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243605] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243607] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243610] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243614] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243616] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243644] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243647] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243650] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243652] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243656] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243658] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243685] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243689] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243692] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243694] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243698] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243700] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243728] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243731] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243734] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.243736] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.243740] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.243742] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.245191] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.252723] ACPI: Dynamic OEM Table Load:
[    0.252736] ACPI: SSDT 0xFFFF8D1F40F28500 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.253749] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.255275] ACPI: Dynamic OEM Table Load:
[    0.255286] ACPI: SSDT 0xFFFF8D1F41423C00 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.256384] ACPI: Dynamic OEM Table Load:
[    0.256393] ACPI: SSDT 0xFFFF8D1F4157D800 000605 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.257871] ACPI: Dynamic OEM Table Load:
[    0.257882] ACPI: SSDT 0xFFFF8D1F4141F800 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.259215] ACPI: Dynamic OEM Table Load:
[    0.259227] ACPI: SSDT 0xFFFF8D1F4142E000 000D74 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.261110] ACPI: Dynamic OEM Table Load:
[    0.261119] ACPI: SSDT 0xFFFF8D1F41423800 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.263967] ACPI: EC: EC started
[    0.263969] ACPI: EC: interrupt blocked
[    0.264422] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.264425] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.264427] ACPI: Interpreter enabled
[    0.264473] ACPI: PM: (supports S0 S3 S4 S5)
[    0.264474] ACPI: Using IOAPIC for interrupt routing
[    0.264512] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.266302] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.266324] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.266326] PCI: Using E820 reservations for host bridge windows
[    0.267434] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.273209] ACPI: PM: Power Resource [USBC]
[    0.283784] ACPI: PM: Power Resource [V0PR]
[    0.283967] ACPI: PM: Power Resource [V1PR]
[    0.284145] ACPI: PM: Power Resource [V2PR]
[    0.287623] ACPI: PM: Power Resource [WRST]
[    0.290966] ACPI: PM: Power Resource [FN00]
[    0.291059] ACPI: PM: Power Resource [FN01]
[    0.291141] ACPI: PM: Power Resource [FN02]
[    0.291221] ACPI: PM: Power Resource [FN03]
[    0.291299] ACPI: PM: Power Resource [FN04]
[    0.291830] ACPI: PM: Power Resource [PIN]
[    0.292293] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.292302] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.294455] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR DPC]
[    0.297156] PCI host bridge to bus 0000:00
[    0.297158] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.297162] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.297164] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.297166] pci_bus 0000:00: root bus resource [mem 0x9b800000-0xdfffffff window]
[    0.297168] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.297170] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.297257] pci 0000:00:00.0: [8086:9b71] type 00 class 0x060000
[    0.297359] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[    0.297371] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.297379] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.297385] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.297406] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.297410] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.297622] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.297635] pci 0000:00:04.0: reg 0x10: [mem 0xb1510000-0xb1517fff 64bit]
[    0.297919] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.297933] pci 0000:00:08.0: reg 0x10: [mem 0xb1520000-0xb1520fff 64bit]
[    0.298076] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[    0.298095] pci 0000:00:12.0: reg 0x10: [mem 0xb1521000-0xb1521fff 64bit]
[    0.298257] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[    0.298275] pci 0000:00:14.0: reg 0x10: [mem 0xb1500000-0xb150ffff 64bit]
[    0.298346] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.298681] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[    0.298700] pci 0000:00:14.2: reg 0x10: [mem 0xb151c000-0xb151dfff 64bit]
[    0.298713] pci 0000:00:14.2: reg 0x18: [mem 0xb1522000-0xb1522fff 64bit]
[    0.298841] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[    0.298863] pci 0000:00:15.0: reg 0x10: [mem 0xb1523000-0xb1523fff 64bit]
[    0.299220] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[    0.299243] pci 0000:00:16.0: reg 0x10: [mem 0xb1524000-0xb1524fff 64bit]
[    0.299325] pci 0000:00:16.0: PME# supported from D3hot
[    0.299810] pci 0000:00:17.0: [8086:02d3] type 00 class 0x010601
[    0.299826] pci 0000:00:17.0: reg 0x10: [mem 0xb151e000-0xb151ffff]
[    0.299836] pci 0000:00:17.0: reg 0x14: [mem 0xb1529000-0xb15290ff]
[    0.299845] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
[    0.299855] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
[    0.299864] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.299874] pci 0000:00:17.0: reg 0x24: [mem 0xb1528000-0xb15287ff]
[    0.299921] pci 0000:00:17.0: PME# supported from D3hot
[    0.300304] pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400
[    0.300392] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.300420] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.301138] pci 0000:00:1d.1: [8086:02b1] type 01 class 0x060400
[    0.301226] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.301254] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
[    0.301948] pci 0000:00:1d.2: [8086:02b2] type 01 class 0x060400
[    0.302039] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.302067] pci 0000:00:1d.2: PTM enabled (root), 4ns granularity
[    0.302765] pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400
[    0.302852] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.302880] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.303588] pci 0000:00:1e.0: [8086:02a8] type 00 class 0x078000
[    0.303612] pci 0000:00:1e.0: reg 0x10: [mem 0xb1525000-0xb1525fff 64bit]
[    0.304003] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[    0.304357] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040300
[    0.304409] pci 0000:00:1f.3: reg 0x10: [mem 0xb1518000-0xb151bfff 64bit]
[    0.304473] pci 0000:00:1f.3: reg 0x20: [mem 0xb1000000-0xb10fffff 64bit]
[    0.304600] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.305263] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[    0.305287] pci 0000:00:1f.4: reg 0x10: [mem 0xb1526000-0xb15260ff 64bit]
[    0.305312] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.305582] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[    0.305599] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.305768] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.305789] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.305818] pci 0000:01:00.0: reg 0x18: [mem 0xb1404000-0xb1404fff 64bit]
[    0.305836] pci 0000:01:00.0: reg 0x20: [mem 0xb1400000-0xb1403fff 64bit]
[    0.305947] pci 0000:01:00.0: supports D1 D2
[    0.305949] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.306197] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.306201] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.306205] pci 0000:00:1d.0:   bridge window [mem 0xb1400000-0xb14fffff]
[    0.306550] pci 0000:02:00.0: [10ec:c822] type 00 class 0x028000
[    0.306577] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.306609] pci 0000:02:00.0: reg 0x18: [mem 0xb1300000-0xb130ffff 64bit]
[    0.306760] pci 0000:02:00.0: supports D1 D2
[    0.306762] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.307335] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.307338] pci 0000:00:1d.1:   bridge window [io  0x2000-0x2fff]
[    0.307342] pci 0000:00:1d.1:   bridge window [mem 0xb1300000-0xb13fffff]
[    0.307426] pci 0000:03:00.0: [10ec:522a] type 00 class 0xff0000
[    0.307450] pci 0000:03:00.0: reg 0x10: [mem 0xb1200000-0xb1200fff]
[    0.307598] pci 0000:03:00.0: supports D1 D2
[    0.307600] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.307876] pci 0000:00:1d.2: PCI bridge to [bus 03]
[    0.307881] pci 0000:00:1d.2:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.307945] pci 0000:04:00.0: [15b7:5005] type 00 class 0x010802
[    0.307968] pci 0000:04:00.0: reg 0x10: [mem 0xb1100000-0xb1103fff 64bit]
[    0.308283] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.308288] pci 0000:00:1d.4:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.316763] ACPI: EC: interrupt unblocked
[    0.316765] ACPI: EC: event unblocked
[    0.316782] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.316783] ACPI: EC: GPE=0x6e
[    0.316785] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.316788] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.317040] iommu: Default domain type: Translated 
[    0.317040] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.317077] ACPI: bus type USB registered
[    0.317095] usbcore: registered new interface driver usbfs
[    0.317103] usbcore: registered new interface driver hub
[    0.317112] usbcore: registered new device driver usb
[    0.317159] pps_core: LinuxPPS API ver. 1 registered
[    0.317160] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.317163] PTP clock support registered
[    0.317175] Registered efivars operations
[    0.318198] NetLabel: Initializing
[    0.318199] NetLabel:  domain hash size = 128
[    0.318200] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.318217] NetLabel:  unlabeled traffic allowed by default
[    0.318222] PCI: Using ACPI for IRQ routing
[    0.360043] PCI: pci_cache_line_size set to 64 bytes
[    0.360660] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.360662] e820: reserve RAM buffer [mem 0x79cd4000-0x7bffffff]
[    0.360664] e820: reserve RAM buffer [mem 0x7e4d0000-0x7fffffff]
[    0.360665] e820: reserve RAM buffer [mem 0x8fc4f000-0x8fffffff]
[    0.360667] e820: reserve RAM buffer [mem 0x262800000-0x263ffffff]
[    0.360685] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.360685] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.360685] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.360685] vgaarb: loaded
[    0.361016] clocksource: Switched to clocksource tsc-early
[    0.361139] VFS: Disk quotas dquot_6.6.0
[    0.361158] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.361301] pnp: PnP ACPI init
[    0.361441] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.361737] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.361742] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.361746] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.361750] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.361753] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.361757] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.361761] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.362158] system 00:02: [io  0xff00-0xfffe] has been reserved
[    0.362381] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.362385] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.362548] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.363388] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.363393] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.363396] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.363400] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.363403] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.363407] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.363410] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.363414] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.363935] system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.364281] pnp: PnP ACPI: found 8 devices
[    0.371861] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.371993] NET: Registered PF_INET protocol family
[    0.372239] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.374444] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.374468] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.374482] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.374649] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.375264] TCP: Hash tables configured (established 65536 bind 65536)
[    0.375359] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.375389] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.375424] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.375542] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.375550] NET: Registered PF_XDP protocol family
[    0.375570] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.375576] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.375581] pci 0000:00:1d.0:   bridge window [mem 0xb1400000-0xb14fffff]
[    0.375588] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.375590] pci 0000:00:1d.1:   bridge window [io  0x2000-0x2fff]
[    0.375594] pci 0000:00:1d.1:   bridge window [mem 0xb1300000-0xb13fffff]
[    0.375601] pci 0000:00:1d.2: PCI bridge to [bus 03]
[    0.375604] pci 0000:00:1d.2:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.375611] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.375614] pci 0000:00:1d.4:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.375621] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.375624] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.375626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.375628] pci_bus 0000:00: resource 7 [mem 0x9b800000-0xdfffffff window]
[    0.375629] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.375631] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.375633] pci_bus 0000:01: resource 1 [mem 0xb1400000-0xb14fffff]
[    0.375635] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.375636] pci_bus 0000:02: resource 1 [mem 0xb1300000-0xb13fffff]
[    0.375638] pci_bus 0000:03: resource 1 [mem 0xb1200000-0xb12fffff]
[    0.375640] pci_bus 0000:04: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.376452] PCI: CLS 0 bytes, default 64
[    0.376505] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.376507] software IO TLB: mapped [mem 0x000000006e7f1000-0x00000000727f1000] (64MB)
[    0.376546] Trying to unpack rootfs image as initramfs...
[    0.376639] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    0.376643] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.376645] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.376646] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.376648] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.376650] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    0.377127] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.377148] sgx: EPC section 0x90200000-0x95ffffff
[    0.378321] Initialise system trusted keyrings
[    0.378449] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.378819] zbud: loaded
[    0.390391] Key type asymmetric registered
[    0.390394] Asymmetric key parser 'x509' registered
[    0.390414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.390487] io scheduler mq-deadline registered
[    0.390503] io scheduler bfq registered
[    0.391047] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.391050] crc32: self tests passed, processed 225944 bytes in 223520 nsec
[    0.391275] crc32c: CRC_LE_BITS = 64
[    0.391276] crc32c: self tests passed, processed 112972 bytes in 110002 nsec
[    0.412787] crc32_combine: 8373 self tests passed
[    0.434292] crc32c_combine: 8373 self tests passed
[    0.435090] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.435186] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[    0.435264] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[    0.435267] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.435629] pcieport 0000:00:1d.1: PME: Signaling with IRQ 123
[    0.435720] pcieport 0000:00:1d.1: AER: enabled with IRQ 123
[    0.435797] pcieport 0000:00:1d.1: DPC: enabled with IRQ 123
[    0.435800] pcieport 0000:00:1d.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.436145] pcieport 0000:00:1d.2: PME: Signaling with IRQ 124
[    0.436231] pcieport 0000:00:1d.2: AER: enabled with IRQ 124
[    0.436304] pcieport 0000:00:1d.2: DPC: enabled with IRQ 124
[    0.436307] pcieport 0000:00:1d.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.436635] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[    0.436726] pcieport 0000:00:1d.4: AER: enabled with IRQ 125
[    0.436802] pcieport 0000:00:1d.4: DPC: enabled with IRQ 125
[    0.436805] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.438166] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.439341] hpet_acpi_add: no address or irqs in _CRS
[    0.439397] Linux agpgart interface v0.103
[    0.449440] brd: module loaded
[    0.451749] loop: module loaded
[    0.452340] nvme nvme0: pci function 0000:04:00.0
[    0.452649] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.452654] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.453252] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.453414] mousedev: PS/2 mouse device common for all mice
[    0.453674] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.455325] rtc_cmos rtc_cmos: registered as rtc0
[    0.455555] rtc_cmos rtc_cmos: setting system clock to 2024-10-09T07:03:52 UTC (1728457432)
[    0.455595] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.455773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.455955] intel_pstate: Intel P-state driver initializing
[    0.456127] intel_pstate: HWP enabled
[    0.456173] ledtrig-cpu: registered to indicate activity on CPUs
[    0.456224] simple-framebuffer simple-framebuffer.0: framebuffer at 0xa0000000, 0x7e9000 bytes
[    0.456228] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[    0.456283] fbcon: Deferring console take-over
[    0.456285] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.457407] nvme nvme0: 4/0/0 default/read/poll queues
[    0.460491]  nvme0n1: p1 p2 p3
[    0.474106] NET: Registered PF_INET6 protocol family
[    0.474517] Segment Routing with IPv6
[    0.474519] RPL Segment Routing with IPv6
[    0.474540] In-situ OAM (IOAM) with IPv6
[    0.474973] microcode: sig=0x806ec, pf=0x4, revision=0xfc
[    0.474986] microcode: Microcode Update Driver: v2.2.
[    0.474991] IPI shorthand broadcast: enabled
[    0.475015] sched_clock: Marking stable (465194554, 9697325)->(504198177, -29306298)
[    0.475226] registered taskstats version 1
[    0.475233] Loading compiled-in X.509 certificates
[    0.476118] Loaded X.509 cert 'Build time autogenerated kernel key: 8e8da4986a90e3082b99b692f3cfb94a5b7656b2'
[    0.477008] zswap: loaded using pool zstd/zbud
[    0.477252] Key type .fscrypt registered
[    0.477254] Key type fscrypt-provisioning registered
[    0.649306] Freeing initrd memory: 21744K
[    0.652094] Key type encrypted registered
[    0.652107] ima: Allocated hash algorithm: sha512
[    0.669681] ima: No architecture policies found
[    0.669692] evm: Initialising EVM extended attributes:
[    0.669692] evm: security.selinux
[    0.669693] evm: security.SMACK64
[    0.669694] evm: security.SMACK64EXEC
[    0.669694] evm: security.SMACK64TRANSMUTE
[    0.669695] evm: security.SMACK64MMAP
[    0.669695] evm: security.apparmor
[    0.669695] evm: security.ima
[    0.669696] evm: security.capability
[    0.669696] evm: HMAC attrs: 0x1
[    0.671457] clk: Disabling unused clocks
[    0.672231] Freeing unused decrypted memory: 2036K
[    0.672755] Freeing unused kernel image (initmem) memory: 3004K
[    0.672757] Write protecting the kernel read-only data: 26624k
[    0.673221] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.673427] Freeing unused kernel image (rodata/data gap) memory: 864K
[    0.673435] rodata_test: all tests were successful
[    0.673442] Run /init as init process
[    0.673443]   with arguments:
[    0.673445]     /init
[    0.673446]     splash
[    0.673447]   with environment:
[    0.673448]     HOME=/
[    0.673448]     TERM=linux
[    0.673449]     BOOT_IMAGE=/@/boot/vmlinuz-un-def
[    0.926699] raid6: avx2x4   gen() 33190 MB/s
[    0.943698] raid6: avx2x2   gen() 31810 MB/s
[    0.960698] raid6: avx2x1   gen() 32504 MB/s
[    0.960699] raid6: using algorithm avx2x4 gen() 33190 MB/s
[    0.977700] raid6: .... xor() 6322 MB/s, rmw enabled
[    0.977702] raid6: using avx2x2 recovery algorithm
[    0.978465] xor: automatically using best checksumming function   avx       
[    1.048834] Btrfs loaded, crc32c=crc32c-intel, assert=on, integrity-checker=on, zoned=yes, fsverity=yes
[    1.215370] ACPI: bus type drm_connector registered
[    1.322046] BTRFS: device fsid a0ccbdd7-ce3c-4243-a8cb-3adfea38c17a devid 1 transid 54 /dev/nvme0n1p3 scanned by btrfs (524)
[    1.408720] tsc: Refined TSC clocksource calibration: 2591.998 MHz
[    1.408728] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb518234, max_idle_ns: 440795279333 ns
[    1.532109] clocksource: Switched to clocksource tsc
[    1.574194] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.587698] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.589767] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.651969] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.651979] i915 0000:00:02.0: [drm] [ENCODER:118:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.651982] i915 0000:00:02.0: [drm] [ENCODER:122:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.671562] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    1.676962] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.677200] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[    1.921925] i915 0000:00:02.0: [drm] *ERROR* Unexpected DP dual mode adaptor ID 7f
[    1.922056] fbcon: i915drmfb (fb0) is primary device
[    1.922059] fbcon: Deferring console take-over
[    1.922062] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    2.447816] i915 0000:00:02.0: [drm] *ERROR* Unexpected DP dual mode adaptor ID 7f
[    2.993566] PM: Image not found (code -22)
[    3.058831] BTRFS info (device nvme0n1p3): first mount of filesystem a0ccbdd7-ce3c-4243-a8cb-3adfea38c17a
[    3.058851] BTRFS info (device nvme0n1p3): using crc32c (crc32c-intel) checksum algorithm
[    3.058866] BTRFS info (device nvme0n1p3): using free space tree
[    3.064505] BTRFS info (device nvme0n1p3): enabling ssd optimizations
[    4.987837] systemd[1]: Inserted module 'autofs4'
[    5.037956] systemd[1]: systemd v249.17-alt2 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    5.038037] systemd[1]: Detected architecture x86-64.
[    5.038544] systemd[1]: Hostname set to <laity3bout>.
[    5.068379] systemd-sysv-generator[2435]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    5.075721] systemd-sysv-generator[2435]: SysV service '/etc/rc.d/init.d/openvpn' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    5.076567] systemd-sysv-generator[2435]: SysV service '/etc/rc.d/init.d/ifplugd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    5.116675] systemd[1]: /lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock \xe2\x86\x92 /run/cups/cups.sock; please update the unit file accordingly.
[    5.131691] systemd[1]: Queued start job for default target Graphical Interface.
[    5.144155] systemd[1]: Created slice Slice /system/modprobe.
[    5.144547] systemd[1]: Created slice Slice /system/systemd-fsck.
[    5.144705] systemd[1]: Created slice User and Session Slice.
[    5.144882] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.144944] systemd[1]: Reached target Login Prompts.
[    5.144977] systemd[1]: Reached target Preparation for Network.
[    5.145008] systemd[1]: Reached target Remote Encrypted Volumes.
[    5.145031] systemd[1]: Reached target Slice Units.
[    5.145061] systemd[1]: Reached target Local Verity Protected Volumes.
[    5.145204] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.145228] systemd[1]: Reached target RPC Port Mapper.
[    5.145290] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.145419] systemd[1]: Listening on Journal Audit Socket.
[    5.145514] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.145612] systemd[1]: Listening on Journal Socket.
[    5.145951] systemd[1]: Listening on udev Control Socket.
[    5.146045] systemd[1]: Listening on udev Kernel Socket.
[    5.146304] systemd[1]: Listening on User Database Manager Socket.
[    5.146977] systemd[1]: Mounting Huge Pages File System...
[    5.147712] systemd[1]: Mounting POSIX Message Queue File System...
[    5.148523] systemd[1]: Mounting Kernel Debug File System...
[    5.149472] systemd[1]: Mounting Kernel Trace File System...
[    5.150740] systemd[1]: Starting Create List of Static Device Nodes...
[    5.151895] systemd[1]: Starting Load Kernel Module configfs...
[    5.152878] systemd[1]: Starting Load Kernel Module dm_mod...
[    5.154101] systemd[1]: Starting Load Kernel Module drm...
[    5.155214] systemd[1]: Starting Load Kernel Module efi_pstore...
[    5.156060] systemd[1]: Starting Load Kernel Module fuse...
[    5.157140] systemd[1]: Starting Load Kernel Module loop...
[    5.158791] pstore: Using crash dump compression: zstd
[    5.167669] systemd[1]: Starting RPC Bind...
[    5.169592] pstore: Registered efi as persistent store backend
[    5.170614] systemd[1]: Starting File System Check on Root Device...
[    5.171243] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    5.171256] device-mapper: uevent: version 1.0.3
[    5.171353] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    5.172697] fuse: init (API version 7.38)
[    5.172930] systemd[1]: Starting Journal Service...
[    5.174138] systemd[1]: Starting Load Kernel Modules...
[    5.175466] systemd[1]: Starting Coldplug All udev Devices...
[    5.176463] systemd[1]: Starting Setup Virtual Console...
[    5.178618] systemd[1]: Mounted Huge Pages File System.
[    5.178763] systemd[1]: Mounted POSIX Message Queue File System.
[    5.178881] systemd[1]: Mounted Kernel Debug File System.
[    5.179007] systemd[1]: Mounted Kernel Trace File System.
[    5.180184] systemd[1]: Finished Create List of Static Device Nodes.
[    5.180549] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    5.180759] systemd[1]: Finished Load Kernel Module configfs.
[    5.181019] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    5.181223] systemd[1]: Finished Load Kernel Module dm_mod.
[    5.181474] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    5.181681] systemd[1]: Finished Load Kernel Module drm.
[    5.181927] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    5.182125] systemd[1]: Finished Load Kernel Module efi_pstore.
[    5.182373] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    5.182749] systemd[1]: Finished Load Kernel Module fuse.
[    5.183022] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    5.183297] systemd[1]: Finished Load Kernel Module loop.
[    5.184931] systemd[1]: Finished File System Check on Root Device.
[    5.186044] systemd[1]: Mounting FUSE Control File System...
[    5.186987] systemd[1]: Mounting Kernel Configuration File System...
[    5.188402] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.188495] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    5.189945] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.190966] systemd[1]: Started RPC Bind.
[    5.191246] systemd[1]: Mounted FUSE Control File System.
[    5.192592] systemd[1]: Mounted Kernel Configuration File System.
[    5.204295] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.206106] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.206166] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    5.214575] systemd[1]: Starting Load/Save Random Seed...
[    5.216085] systemd[1]: Finished Create Static Device Nodes in /dev.
[    5.216235] systemd[1]: Reached target Preparation for Local File Systems.
[    5.216296] systemd[1]: Condition check resulted in Lock Directory being skipped.
[    5.216309] systemd[1]: Condition check resulted in Runtime Directory being skipped.
[    5.217593] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    5.224555] systemd[1]: Started Journal Service.
[    5.269590] systemd-journald[2450]: Received client request to flush runtime journal.
[    5.292054] vboxdrv: loading out-of-tree module taints kernel.
[    5.292265] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    5.300532] vboxdrv: Found 4 processor cores/threads
[    5.318154] vboxdrv: TSC mode is Invariant, tentative frequency 2591991522 Hz
[    5.318157] vboxdrv: Successfully loaded version 7.0.18 r162988 (interface 0x00330004)
[    5.319542] VBoxNetFlt: Successfully started.
[    5.320127] VBoxNetAdp: Successfully started.
[    5.466138] Consider using thermal netlink events interface
[    5.466718] ACPI: AC: AC Adapter [ACAD] (on-line)
[    5.499419] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    5.501847] ACPI: button: Lid Switch [LID0]
[    5.502761] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.503164] intel_pmc_core INT33A1:00:  initialized
[    5.503422] ACPI: button: Power Button [PWRB]
[    5.509948] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.511052] ACPI: button: Power Button [PWRF]
[    5.537092] random: crng init done
[    5.594733] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[    5.599670] ideapad_acpi VPC2004:00: Keyboard backlight control not available
[    5.609808] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    5.627621] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20220331/psargs-330)
[    5.627633] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[    5.628217] ideapad_acpi VPC2004:00: DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable
[    5.628220] ideapad_acpi VPC2004:00: DYTC interface is not available
[    5.628301] ACPI: thermal: [Firmware Bug]: Invalid critical threshold (0)
[    5.628400] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20220331/psargs-330)
[    5.628406] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[    5.635508] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    5.797898] Adding 8003580k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:8003580k SSFS
[   12.668557] ACPI: battery: Slot [BAT1] (battery present)
[   12.722609] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   12.723894] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   12.735520] hid: raw HID events driver (C) Jiri Kosina
[   12.735706] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   12.735713] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[   12.737810] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[   12.738059] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   12.738063] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[   12.738066] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[   12.741439] SCSI subsystem initialized
[   12.742938] hub 1-0:1.0: USB hub found
[   12.742957] hub 1-0:1.0: 12 ports detected
[   12.744833] hub 2-0:1.0: USB hub found
[   12.744847] hub 2-0:1.0: 6 ports detected
[   12.752400] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   12.752415] r8169 0000:01:00.0 eth0: RTL8168h/8111h, b4:a9:fc:62:0d:1b, XID 541, IRQ 135
[   12.752419] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   12.754965] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[   12.755304] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   12.757333] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[   12.757483] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   12.757542] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   12.758565] i2c i2c-7: 1/2 memory slots populated (from DMI)
[   12.781977] elan_i2c i2c-ELAN0632:00: supply vcc not found, using dummy regulator
[   12.783182] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   12.784743] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.784988] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   12.788517] libata version 3.00 loaded.
[   12.789296] cryptd: max_cpu_qlen set to 1000
[   12.792876] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[   12.793600] idma64 idma64.1: Found Intel integrated DMA 64-bit
[   12.916051] elan_i2c i2c-ELAN0632:00: Elan Touchpad: Module ID: 0x005b, Firmware: 0x0001, Sample: 0x0002, IAP: 0x0000
[   12.919360] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-8/i2c-ELAN0632:00/input/input7
[   12.932456] AVX2 version of gcm_enc/dec engaged.
[   12.932490] AES CTR mode by8 optimization enabled
[   12.943064] ahci 0000:00:17.0: version 3.0
[   12.943292] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[   12.943297] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
[   12.955343] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[   12.955837] intel_rapl_common: Found RAPL domain package
[   12.955840] intel_rapl_common: Found RAPL domain dram
[   12.969228] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   12.969406] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.981157] scsi host0: ahci
[   12.989605] scsi host1: ahci
[   12.989679] ata1: DUMMY
[   12.989686] ata2: SATA max UDMA/133 abar m2048@0xb1528000 port 0xb1528180 irq 136
[   12.989718] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[   12.995172] snd_hda_intel 0000:00:1f.3: Codec #0 successfully probed, retry count = 0
[   12.995230] snd_hda_intel 0000:00:1f.3: Codec #2 successfully probed, retry count = 0
[   13.013918] intel_rapl_common: Found RAPL domain package
[   13.013922] intel_rapl_common: Found RAPL domain core
[   13.013923] intel_rapl_common: Found RAPL domain uncore
[   13.013924] intel_rapl_common: Found RAPL domain dram
[   13.013925] intel_rapl_common: Found RAPL domain psys
[   13.022552] iTCO_vendor_support: vendor-support=0
[   13.026137] r8169 0000:01:00.0 enp1s0: renamed from eth0
[   13.031398] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[   13.042342] dw-apb-uart.1: ttyS0 at MMIO 0xb1525000 (irq = 20, base_baud = 7500000) is a 16550A
[   13.239201] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[   13.295744] ata2: SATA link down (SStatus 4 SControl 300)
[   13.347302] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[   13.347558] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.349594] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.349611] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.349620] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   13.349629] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   13.349635] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   13.349641] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   13.349648] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   13.466100] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   13.466188] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   13.466240] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   13.466283] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   13.466355] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   13.466413] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   13.474045] rtw_8822ce 0000:02:00.0: enabling device (0000 -> 0003)
[   13.477331] rtw_8822ce 0000:02:00.0: Firmware version 9.9.15, H2C version 15
[   13.477368] rtw_8822ce 0000:02:00.0: Firmware version 9.9.4, H2C version 15
[   13.505821] intel_tcc_cooling: Programmable TCC Offset detected
[   13.541223] rtw_8822ce 0000:02:00.0 wlp2s0: renamed from wlan0
[   13.547096] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[   13.772274] mc: Linux media interface: v0.10
[   13.803628] videodev: Linux video capture interface: v2.00
[   13.825117] Bluetooth: Core ver 2.22
[   13.825133] NET: Registered PF_BLUETOOTH protocol family
[   13.825134] Bluetooth: HCI device and connection manager initialized
[   13.825139] Bluetooth: HCI socket layer initialized
[   13.825141] Bluetooth: L2CAP socket layer initialized
[   13.825145] Bluetooth: SCO socket layer initialized
[   13.835502] usb 1-6: Found UVC 1.00 device Integrated Camera (13d3:56a6)
[   13.836515] usbcore: registered new interface driver btusb
[   13.837718] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
[   13.838705] Bluetooth: hci0: RTL: rom_version status=0 version=3
[   13.838708] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
[   13.839516] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input14
[   13.839594] usbcore: registered new interface driver uvcvideo
[   13.839736] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
[   13.839942] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35990
[   14.019712] Bluetooth: hci0: RTL: fw version 0x0cc6d2e3
[   14.053920] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.053924] Bluetooth: BNEP filters: protocol multicast
[   14.053928] Bluetooth: BNEP socket layer initialized
[   14.088826] Bluetooth: MGMT ver 1.22
[   14.096406] NET: Registered PF_ALG protocol family
[   14.189922] NET: Registered PF_QIPCRTR protocol family
[   14.330088] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[   14.494926] r8169 0000:01:00.0 enp1s0: Link is Down
[   15.887626] NET: Registered PF_PACKET protocol family
[   16.682827] i915 0000:00:02.0: [drm] *ERROR* Unexpected DP dual mode adaptor ID 7f
[   18.116091] ucsi_acpi USBC000:00: PPM init failed (-110)
[   26.196632] pcieport 0000:00:1d.1: AER: Multiple Corrected error message received from 0000:02:00.0
[   26.196650] rtw_8822ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   26.196652] rtw_8822ce 0000:02:00.0:   device [10ec:c822] error status/mask=00000001/0000e000
[   26.196655] rtw_8822ce 0000:02:00.0:    [ 0] RxErr                 
[  260.166373] Bluetooth: RFCOMM TTY layer initialized
[  260.166380] Bluetooth: RFCOMM socket layer initialized
[  260.166385] Bluetooth: RFCOMM ver 1.11
[  261.747110] i915 0000:00:02.0: [drm] *ERROR* Unexpected DP dual mode adaptor ID 7f
[  326.852115] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  327.266266] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  327.325549] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  327.325679] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  327.351886] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  327.906495] wlp2s0: authenticate with f0:a7:31:50:7c:df
[  328.203396] wlp2s0: send auth to f0:a7:31:50:7c:df (try 1/3)
[  328.319429] wlp2s0: authenticate with f0:a7:31:50:7c:df
[  328.319564] wlp2s0: send auth to f0:a7:31:50:7c:df (try 1/3)
[  328.431148] wlp2s0: authenticated
[  329.279392] wlp2s0: authenticate with f0:a7:31:50:95:d8
[  329.668166] wlp2s0: send auth to f0:a7:31:50:95:d8 (try 1/3)
[  329.830715] wlp2s0: authenticate with f0:a7:31:50:95:d8
[  329.830867] wlp2s0: send auth to f0:a7:31:50:95:d8 (try 1/3)
[  329.933206] wlp2s0: authenticated
[  331.273558] wlp2s0: authenticate with f0:a7:31:50:95:d9
[  331.683255] wlp2s0: send auth to f0:a7:31:50:95:d9 (try 1/3)
[  331.810354] wlp2s0: authenticate with f0:a7:31:50:95:d9
[  331.810491] wlp2s0: send auth to f0:a7:31:50:95:d9 (try 1/3)
[  331.924504] wlp2s0: authenticated
[  341.220469] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  341.521387] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  341.526197] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  341.526335] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  341.554793] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  356.110704] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  356.407362] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  356.411784] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  356.411919] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  356.440407] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  366.908966] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  367.205420] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  367.222518] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  367.222674] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  367.240350] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  385.101954] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  385.398394] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  385.402430] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  385.402549] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  385.426721] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  399.931793] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  400.227413] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  400.245436] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  400.245678] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  400.256930] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  410.726072] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  411.024398] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  411.041072] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  411.041768] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  411.053086] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  421.671924] pcieport 0000:00:1d.1: AER: Multiple Corrected error message received from 0000:02:00.0
[  421.671951] rtw_8822ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  421.671957] rtw_8822ce 0000:02:00.0:   device [10ec:c822] error status/mask=00000001/0000e000
[  421.671963] rtw_8822ce 0000:02:00.0:    [ 0] RxErr                 
[  426.161913] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  426.456340] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  426.460355] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  426.460504] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  426.485816] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  436.952872] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  437.249427] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  437.300795] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  437.300941] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  437.308982] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  455.104951] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  455.402382] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  455.406783] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  455.406921] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  455.430135] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  455.431806] pcieport 0000:00:1d.1: AER: Multiple Corrected error message received from 0000:02:00.0
[  455.431822] rtw_8822ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  455.431824] rtw_8822ce 0000:02:00.0:   device [10ec:c822] error status/mask=00000001/0000e000
[  455.431826] rtw_8822ce 0000:02:00.0:    [ 0] RxErr                 
[  465.859394] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  466.155380] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  466.160517] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  466.160690] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  466.185298] wlp2s0: 1c:61:b4:34:2d:01 denied authentication (status 1)
[  484.121015] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  484.416429] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  484.421365] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  484.421524] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  484.447295] wlp2s0: authenticated
[  484.448152] wlp2s0: associate with 1c:61:b4:34:2d:01 (try 1/3)
[  484.453833] wlp2s0: RX AssocResp from 1c:61:b4:34:2d:01 (capab=0x511 status=0 aid=1)
[  484.454828] wlp2s0: associated
[  484.527380] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 1c:61:b4:34:2d:01
[  484.538569] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  510.091640] pcieport 0000:00:1d.1: AER: Multiple Corrected error message received from 0000:02:00.0
[  510.091668] rtw_8822ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  510.091674] rtw_8822ce 0000:02:00.0:   device [10ec:c822] error status/mask=00000001/0000e000
[  510.091681] rtw_8822ce 0000:02:00.0:    [ 0] RxErr                 
[  540.797448] pcieport 0000:00:1d.1: AER: Multiple Corrected error message received from 0000:02:00.0
[  540.797465] rtw_8822ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  540.797467] rtw_8822ce 0000:02:00.0:   device [10ec:c822] error status/mask=00000001/0000e000
[  540.797469] rtw_8822ce 0000:02:00.0:    [ 0] RxErr                 
[  540.982822] pcieport 0000:00:1d.1: AER: Multiple Corrected error message received from 0000:02:00.0
[  540.982853] rtw_8822ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  540.982856] rtw_8822ce 0000:02:00.0:   device [10ec:c822] error status/mask=00000001/0000e000
[  540.982859] rtw_8822ce 0000:02:00.0:    [ 0] RxErr                 
[  783.126868] systemd-sysv-generator[4719]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  783.130299] systemd-sysv-generator[4719]: SysV service '/etc/rc.d/init.d/openvpn' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  783.130634] systemd-sysv-generator[4719]: SysV service '/etc/rc.d/init.d/ifplugd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  783.269106] systemd-sysv-generator[4736]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  783.271511] systemd-sysv-generator[4736]: SysV service '/etc/rc.d/init.d/openvpn' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  783.271782] systemd-sysv-generator[4736]: SysV service '/etc/rc.d/init.d/ifplugd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  784.742872] systemd-sysv-generator[4961]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  784.745167] systemd-sysv-generator[4961]: SysV service '/etc/rc.d/init.d/openvpn' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  784.745429] systemd-sysv-generator[4961]: SysV service '/etc/rc.d/init.d/ifplugd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  784.899049] systemd-sysv-generator[4987]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  784.901417] systemd-sysv-generator[4987]: SysV service '/etc/rc.d/init.d/openvpn' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[  784.901753] systemd-sysv-generator[4987]: SysV service '/etc/rc.d/init.d/ifplugd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 1163.627760] block nvme0n1: No UUID available providing old NGUID
