[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073]
[    0.000000] Linux version 6.12.12-6.12-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt3), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP PREEMPT_DYNAMIC Fri Feb 14 19:43:53 UTC 2025
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: Aquarius Production Company AQBM1000
[    0.000000] efi: EFI v2.7 by Aquarius Production Company
[    0.000000] efi: SMBIOS=0xfde60000 SMBIOS 3.0=0xfde40000 ACPI 2.0=0xfe480018 MEMATTR=0xf9f39018 INITRD=0xf9f22218 MEMRESERVE=0xf9f22298 
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000bffffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbfdfda6c0-0xbfdfe05ff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000bffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000080ffffff]
[    0.000000]   node   0: [mem 0x0000000081000000-0x00000000810bffff]
[    0.000000]   node   0: [mem 0x00000000810c0000-0x000000008fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x0000000090ffffff]
[    0.000000]   node   0: [mem 0x0000000091000000-0x00000000fa07efff]
[    0.000000]   node   0: [mem 0x00000000fa07f000-0x00000000fb07efff]
[    0.000000]   node   0: [mem 0x00000000fb07f000-0x00000000fda2ffff]
[    0.000000]   node   0: [mem 0x00000000fda30000-0x00000000fda3ffff]
[    0.000000]   node   0: [mem 0x00000000fda40000-0x00000000fdd0ffff]
[    0.000000]   node   0: [mem 0x00000000fdd10000-0x00000000fde6ffff]
[    0.000000]   node   0: [mem 0x00000000fde70000-0x00000000fe2bffff]
[    0.000000]   node   0: [mem 0x00000000fe2c0000-0x00000000fe44ffff]
[    0.000000]   node   0: [mem 0x00000000fe450000-0x00000000fef1ffff]
[    0.000000]   node   0: [mem 0x00000000fef20000-0x00000000fefaffff]
[    0.000000]   node   0: [mem 0x00000000fefb0000-0x00000000fefbffff]
[    0.000000]   node   0: [mem 0x00000000fefc0000-0x00000000ff0dffff]
[    0.000000]   node   0: [mem 0x00000000ff0e0000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000880000000-0x0000000bffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000bffffffff]
[    0.000000] cma: Reserved 256 MiB at 0x00000000df800000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 34 pages/cpu s100952 r8192 d30120 u139264
[    0.000000] pcpu-alloc: s100952 r8192 d30120 u139264 alloc=34*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v3a
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: detected: ARM erratum 1742098
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=e0a55023-995f-47b6-b0ce-a04a9f467692 ro resume=/dev/disk/by-uuid/3be7abf7-4f47-4477-8cc9-227804eb59d3 panic=30 quiet splash
[    0.000000] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4194304
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000f5d10000-0x00000000f9d10000] (64MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 51046 entries in 200 pages
[    0.000000] ftrace: allocated 200 pages with 3 groups
[    0.000000] Dynamic Preempt: none
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 768 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000002d100000
[    0.000000] ITS [mem 0x2d020000-0x2d03ffff]
[    0.000000] ITS@0x000000002d020000: allocated 262144 Devices @880200000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000008801f0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880800000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000000] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000120] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 38225208935 ns
[    0.000157] sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 42949672950ns
[    0.000489] Console: colour dummy device 80x25
[    0.000501] printk: legacy console [tty0] enabled
[    0.000616] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000)
[    0.000630] pid_max: default: 32768 minimum: 301
[    0.000746] LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,bpf,altha,kiosk,ima,evm
[    0.000942] landlock: Up and running.
[    0.000947] Yama: becoming mindful.
[    0.001664] LSM support for eBPF active
[    0.001669] AltHa disabled.
[    0.001680] Kiosk: Netlink family registered.
[    0.001921] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.001960] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.010106] rcu: Hierarchical SRCU implementation.
[    0.010115] rcu: 	Max phase no-delay instances is 400.
[    0.010353] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.011931] Remapping and enabling EFI services.
[    0.012635] smp: Bringing up secondary CPUs ...
[    0.124617] Detected PIPT I-cache on CPU1
[    0.124697] GICv3: CPU1: found redistributor 1 region 0:0x000000002d120000
[    0.124744] GICv3: CPU1: using allocated LPI pending table @0x0000000880810000
[    0.124800] CPU1: Booted secondary processor 0x0000000001 [0x411fd073]
[    0.256112] Detected PIPT I-cache on CPU2
[    0.256206] GICv3: CPU2: found redistributor 100 region 0:0x000000002d140000
[    0.256252] GICv3: CPU2: using allocated LPI pending table @0x0000000880820000
[    0.256309] CPU2: Booted secondary processor 0x0000000100 [0x411fd073]
[    0.367366] Detected PIPT I-cache on CPU3
[    0.367435] GICv3: CPU3: found redistributor 101 region 0:0x000000002d160000
[    0.367480] GICv3: CPU3: using allocated LPI pending table @0x0000000880830000
[    0.367529] CPU3: Booted secondary processor 0x0000000101 [0x411fd073]
[    0.499009] Detected PIPT I-cache on CPU4
[    0.499110] GICv3: CPU4: found redistributor 200 region 0:0x000000002d180000
[    0.499156] GICv3: CPU4: using allocated LPI pending table @0x0000000880840000
[    0.499211] CPU4: Booted secondary processor 0x0000000200 [0x411fd073]
[    0.610272] Detected PIPT I-cache on CPU5
[    0.610351] GICv3: CPU5: found redistributor 201 region 0:0x000000002d1a0000
[    0.610397] GICv3: CPU5: using allocated LPI pending table @0x0000000880850000
[    0.610445] CPU5: Booted secondary processor 0x0000000201 [0x411fd073]
[    0.741888] Detected PIPT I-cache on CPU6
[    0.742003] GICv3: CPU6: found redistributor 300 region 0:0x000000002d1c0000
[    0.742050] GICv3: CPU6: using allocated LPI pending table @0x0000000880860000
[    0.742107] CPU6: Booted secondary processor 0x0000000300 [0x411fd073]
[    0.853145] Detected PIPT I-cache on CPU7
[    0.853235] GICv3: CPU7: found redistributor 301 region 0:0x000000002d1e0000
[    0.853280] GICv3: CPU7: using allocated LPI pending table @0x0000000880870000
[    0.853329] CPU7: Booted secondary processor 0x0000000301 [0x411fd073]
[    0.853470] smp: Brought up 1 node, 8 CPUs
[    0.853492] SMP: Total of 8 processors activated.
[    0.853498] CPU: All CPU(s) started at EL2
[    0.853516] CPU features: detected: 32-bit EL0 Support
[    0.853520] CPU features: detected: 32-bit EL1 Support
[    0.853526] CPU features: detected: CRC32 instructions
[    0.853705] alternatives: applying system-wide alternatives
[    0.854540] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.854783] Memory: 16011904K/16777216K available (17216K kernel code, 5574K rwdata, 13976K rodata, 9664K init, 1458K bss, 488812K reserved, 262144K cma-reserved)
[    0.855433] devtmpfs: initialized
[    0.863157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.863175] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.866007] 20736 pages in range for non-PLT usage
[    0.866021] 512256 pages in range for PLT usage
[    0.866224] pinctrl core: initialized pinctrl subsystem
[    0.866788] SMBIOS 3.0.0 present.
[    0.866804] DMI: Aquarius Production Company AQBM1000/AQBM1000 Rev 2.0, BIOS 5.6.0 08/28/2022
[    0.866847] DMI: Memory slots populated: 2/4
[    0.869386] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.870446] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.871025] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.871567] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.871609] audit: initializing netlink subsys (disabled)
[    0.871764] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
[    0.872399] thermal_sys: Registered thermal governor 'fair_share'
[    0.872408] thermal_sys: Registered thermal governor 'bang_bang'
[    0.872413] thermal_sys: Registered thermal governor 'step_wise'
[    0.872418] thermal_sys: Registered thermal governor 'user_space'
[    0.872484] cpuidle: using governor ladder
[    0.872518] cpuidle: using governor menu
[    0.872628] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.872866] ASID allocator initialised with 65536 entries
[    0.873415] Serial: AMBA PL011 UART driver
[    0.876812] /soc/interrupt-controller@2d000000: Fixed dependency cycle(s) with /soc/interrupt-controller@2d000000
[    0.876876] /soc/vdu@30260000: Fixed dependency cycle(s) with /soc/hdmi@30280000
[    0.876924] /soc/hdmi@30280000: Fixed dependency cycle(s) with /soc/vdu@30260000
[    0.880682] /soc/vdu@30260000: Fixed dependency cycle(s) with /soc/hdmi@30280000
[    0.880858] /soc/vdu@30260000: Fixed dependency cycle(s) with /soc/hdmi@30280000
[    0.880905] /soc/hdmi@30280000: Fixed dependency cycle(s) with /soc/vdu@30260000
[    0.881659] /soc/hdmi@30280000: Fixed dependency cycle(s) with /hdmi-out
[    0.881708] /hdmi-out: Fixed dependency cycle(s) with /soc/hdmi@30280000
[    0.882917] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.882925] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.882931] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.882936] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.882941] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.882945] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.882950] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.882954] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.884394] ACPI: Interpreter disabled.
[    0.885359] iommu: Default domain type: Translated
[    0.885368] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.886524] usbcore: registered new interface driver usbfs
[    0.886546] usbcore: registered new interface driver hub
[    0.886568] usbcore: registered new device driver usb
[    0.887545] pps_core: LinuxPPS API ver. 1 registered
[    0.887554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.887565] PTP clock support registered
[    0.887894] scmi_core: SCMI protocol bus registered
[    0.888137] efivars: Registered efivars operations
[    0.889065] NetLabel: Initializing
[    0.889074] NetLabel:  domain hash size = 128
[    0.889079] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.889119] NetLabel:  unlabeled traffic allowed by default
[    0.889311] vgaarb: loaded
[    0.889630] clocksource: Switched to clocksource arch_sys_counter
[    0.890011] VFS: Disk quotas dquot_6.6.0
[    0.890039] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.890238] pnp: PnP ACPI: disabled
[    0.896973] NET: Registered PF_INET protocol family
[    0.897286] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.932437] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.932527] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.932543] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.933115] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.934158] TCP: Hash tables configured (established 131072 bind 65536)
[    0.934401] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.934521] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.934762] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.935092] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.935119] NET: Registered PF_XDP protocol family
[    0.935134] PCI: CLS 0 bytes, default 64
[    0.935309] Trying to unpack rootfs image as initramfs...
[    0.941118] kvm [1]: nv: 554 coarse grained trap handlers
[    0.941343] kvm [1]: IPA Size Limit: 44 bits
[    0.943185] kvm [1]: vgic-v2@10220000
[    0.943232] kvm [1]: GIC system register CPU interface enabled
[    0.943265] kvm [1]: vgic interrupt IRQ9
[    0.943302] kvm [1]: Hyp nVHE mode initialized successfully
[    0.945321] Initialise system trusted keyrings
[    0.945530] workingset: timestamp_bits=39 max_order=22 bucket_order=0
[    0.945598] zbud: loaded
[    0.946121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.975035] Key type asymmetric registered
[    0.975045] Asymmetric key parser 'x509' registered
[    0.975106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.975301] io scheduler mq-deadline registered
[    0.975342] io scheduler bfq registered
[    0.975535] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.975542] crc32: self tests passed, processed 225944 bytes in 60120 nsec
[    0.975622] crc32c: CRC_LE_BITS = 64
[    0.975627] crc32c: self tests passed, processed 112972 bytes in 30020 nsec
[    0.988041] crc32_combine: 8373 self tests passed
[    1.000459] crc32c_combine: 8373 self tests passed
[    1.006221] ledtrig-cpu: registered to indicate activity on CPUs
[    1.007048] baikal-pcie 2200000.pcie: failed to find PCIe GPR registers, trying LCRU
[    1.007254] baikal-pcie 2200000.pcie: host bridge /soc/pcie@2200000 ranges:
[    1.007283] baikal-pcie 2200000.pcie:       IO 0x4100000000..0x41000fffff -> 0x0000000000
[    1.007300] baikal-pcie 2200000.pcie:      MEM 0x4200000000..0x423fffffff -> 0x0040000000
[    1.037730] baikal-pcie 2200000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G
[    1.037750] baikal-pcie 2200000.pcie: Invalid eDMA IRQs found
[    1.342371] Freeing initrd memory: 15116K
[    1.996609] baikal-pcie 2200000.pcie: Phy link never came up
[    1.996868] baikal-pcie 2200000.pcie: PCI host bridge to bus 0000:00
[    1.996880] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.996889] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    1.996897] pci_bus 0000:00: root bus resource [mem 0x4200000000-0x423fffffff] (bus address [0x40000000-0x7fffffff])
[    1.996938] pci 0000:00:00.0: [1d39:8060] type 01 class 0x060400 PCIe Root Port
[    1.996988] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.997003] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.997012] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.997028] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    1.997131] pci 0000:00:00.0: supports D1
[    1.997137] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.998330] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.998355] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    1.998363] pci_bus 0000:00: resource 5 [mem 0x4200000000-0x423fffffff]
[    1.998675] pcieport 0000:00:00.0: PME: Signaling with IRQ 22
[    1.998972] pcieport 0000:00:00.0: AER: enabled with IRQ 22
[    1.999237] baikal-pcie 2210000.pcie: failed to find PCIe GPR registers, trying LCRU
[    1.999451] baikal-pcie 2210000.pcie: host bridge /soc/pcie@2210000 ranges:
[    1.999480] baikal-pcie 2210000.pcie:       IO 0x5100000000..0x51000fffff -> 0x0000000000
[    1.999497] baikal-pcie 2210000.pcie:      MEM 0x5200000000..0x523fffffff -> 0x0040000000
[    2.029929] baikal-pcie 2210000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G
[    2.029948] baikal-pcie 2210000.pcie: Invalid eDMA IRQs found
[    2.988606] baikal-pcie 2210000.pcie: Phy link never came up
[    2.988710] baikal-pcie 2210000.pcie: PCI host bridge to bus 0001:00
[    2.988721] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.988729] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    2.988737] pci_bus 0001:00: root bus resource [mem 0x5200000000-0x523fffffff] (bus address [0x40000000-0x7fffffff])
[    2.988771] pci 0001:00:00.0: [1d39:8060] type 01 class 0x060400 PCIe Root Port
[    2.988821] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    2.988836] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    2.988846] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    2.988860] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    2.988959] pci 0001:00:00.0: supports D1
[    2.988965] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    2.990111] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    2.990135] pci_bus 0001:00: resource 4 [io  0x100000-0x1fffff]
[    2.990142] pci_bus 0001:00: resource 5 [mem 0x5200000000-0x523fffffff]
[    2.990364] pcieport 0001:00:00.0: PME: Signaling with IRQ 25
[    2.990663] pcieport 0001:00:00.0: AER: enabled with IRQ 25
[    2.990901] baikal-pcie 2220000.pcie: failed to find PCIe GPR registers, trying LCRU
[    2.991103] baikal-pcie 2220000.pcie: host bridge /soc/pcie@2220000 ranges:
[    2.991129] baikal-pcie 2220000.pcie:       IO 0x6100000000..0x61000fffff -> 0x0000000000
[    2.991145] baikal-pcie 2220000.pcie:      MEM 0x6200000000..0x621fffffff -> 0x0060000000
[    3.021722] baikal-pcie 2220000.pcie: iATU: unroll F, 16 ob, 16 ib, align 64K, limit 4G
[    3.021739] baikal-pcie 2220000.pcie: Invalid eDMA IRQs found
[    3.980605] baikal-pcie 2220000.pcie: Phy link never came up
[    3.980690] baikal-pcie 2220000.pcie: PCI host bridge to bus 0002:00
[    3.980699] pci_bus 0002:00: root bus resource [bus 00-ff]
[    3.980707] pci_bus 0002:00: root bus resource [io  0x200000-0x2fffff] (bus address [0x0000-0xfffff])
[    3.980714] pci_bus 0002:00: root bus resource [mem 0x6200000000-0x621fffffff] (bus address [0x60000000-0x7fffffff])
[    3.980748] pci 0002:00:00.0: [1d39:8060] type 01 class 0x060400 PCIe Root Port
[    3.980797] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[    3.980812] pci 0002:00:00.0:   bridge window [io  0x200000-0x200fff]
[    3.980821] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    3.980836] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    3.980946] pci 0002:00:00.0: supports D1
[    3.980952] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
[    3.982073] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[    3.982097] pci_bus 0002:00: resource 4 [io  0x200000-0x2fffff]
[    3.982104] pci_bus 0002:00: resource 5 [mem 0x6200000000-0x621fffffff]
[    3.982319] pcieport 0002:00:00.0: PME: Signaling with IRQ 28
[    3.982534] pcieport 0002:00:00.0: AER: enabled with IRQ 28
[    3.999906] null-device:baikal-ca57_cmu0: connection ID is greater than 16
[    4.031508] null-device:baikal-ca57_cmu1: connection ID is greater than 16
[    4.063120] null-device:baikal-ca57_cmu2: connection ID is greater than 16
[    4.094730] null-device:baikal-ca57_cmu3: connection ID is greater than 16
[    4.126349] null-device:baikal-avlsp_cmu0: connection ID is greater than 16
[    6.026909] null-device:baikal-avlsp_cmu1: connection ID is greater than 16
[    6.090029] null-device:baikal-xgbe-cmu0: connection ID is greater than 16
[    6.455417] null-device:baikal-xgbe-cmu1: connection ID is greater than 16
[    6.540937] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[    6.543894] 20230000.serial: ttyS0 at MMIO 0x20230000 (irq = 29, base_baud = 460122) is a 16550A
[    6.544562] 20240000.serial: ttyS1 at MMIO 0x20240000 (irq = 30, base_baud = 460122) is a 16550A
[    6.545436] msm_serial: driver initialized
[    6.553027] brd: module loaded
[    6.555958] loop: module loaded
[    6.557883] usbcore: registered new interface driver usbserial_generic
[    6.557909] usbserial: USB Serial support registered for generic
[    6.557927] usbcore: registered new interface driver ch341
[    6.557942] usbserial: USB Serial support registered for ch341-uart
[    6.557958] usbcore: registered new interface driver cp210x
[    6.557972] usbserial: USB Serial support registered for cp210x
[    6.557988] usbcore: registered new interface driver ftdi_sio
[    6.558002] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.558037] usbcore: registered new interface driver pl2303
[    6.558052] usbserial: USB Serial support registered for pl2303
[    6.558325] mousedev: PS/2 mouse device common for all mice
[    6.560276] rtc-pcf2127-i2c 1-0051: registered as rtc0
[    6.560637] rtc-pcf2127-i2c 1-0051: setting system clock to 2025-03-05T10:25:24 UTC (1741170324)
[    6.562760] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[    6.569532] fbcon: Deferring console take-over
[    6.569546] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    6.570010] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    6.570647] arm-ccn 9000000.ccn: No access to interrupts, using timer.
[    6.571471] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 (0,8000003f) counters available
[    6.572741] NET: Registered PF_INET6 protocol family
[    6.573527] Segment Routing with IPv6
[    6.573536] RPL Segment Routing with IPv6
[    6.573566] In-situ OAM (IOAM) with IPv6
[    6.578816] registered taskstats version 1
[    6.579107] Loading compiled-in X.509 certificates
[    6.580613] Loaded X.509 cert 'Build time autogenerated kernel key: 3278eb21e7fd7ce2e702f44ec7b12ed68ed4d19a'
[    6.586819] Demotion targets for Node 0: null
[    6.587054] Key type .fscrypt registered
[    6.587061] Key type fscrypt-provisioning registered
[    6.653600] Key type encrypted registered
[    6.653635] ima: No TPM chip found, activating TPM-bypass!
[    6.653643] ima: Allocated hash algorithm: sha512
[    6.653674] ima: No architecture policies found
[    6.653731] evm: Initialising EVM extended attributes:
[    6.653735] evm: security.selinux
[    6.653740] evm: security.SMACK64
[    6.653744] evm: security.SMACK64EXEC
[    6.653748] evm: security.SMACK64TRANSMUTE
[    6.653752] evm: security.SMACK64MMAP
[    6.653756] evm: security.apparmor
[    6.653760] evm: security.ima
[    6.653764] evm: security.capability
[    6.653767] evm: HMAC attrs: 0x1
[    6.691551] clk: Disabling unused clocks
[    6.691612] PM: genpd: Disabling unused power domains
[    6.697027] Freeing unused kernel memory: 9664K
[    6.697164] rodata_test: all tests were successful
[    6.697182] Run /init as init process
[    6.697188]   with arguments:
[    6.697193]     /init
[    6.697198]     splash
[    6.697203]   with environment:
[    6.697207]     HOME=/
[    6.697211]     TERM=linux
[    6.697214]     BOOT_IMAGE=/boot/vmlinuz
[    8.283219] SCSI subsystem initialized
[    8.301400] libata version 3.00 loaded.
[    8.309212] baikal-dw-hdmi 30280000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
[    8.309786] baikal-dw-hdmi 30280000.hdmi: registered DesignWare HDMI I2C bus driver
[    8.309803] baikal-dw-hdmi 30280000.hdmi: setting audio.regshift=2 for BE-M1000 SoC
[    8.314523] baikal-vdu 30260000.vdu: Found separate description of VDU devices
[    8.314743] baikal-vdu 30260000.vdu: No 'lvds-lanes' property found
[    8.314751] baikal-vdu 30260000.vdu: HDMI output enabled
[    8.314758] baikal-vdu 30260000.vdu: LVDS output disabled
[    8.314913] ahci 2c600000.sata: supply ahci not found, using dummy regulator
[    8.315132] ahci 2c600000.sata: supply phy not found, using dummy regulator
[    8.315173] ahci 2c600000.sata: supply target not found, using dummy regulator
[    8.315350] ahci 2c600000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode
[    8.315362] ahci 2c600000.sata: 1/1 ports implemented (port mask 0x1)
[    8.315368] ahci 2c600000.sata: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part ccc apst 
[    8.315384] ahci 2c600000.sata: port 0 is not capable of FBS
[    8.317774] scsi host0: ahci
[    8.318087] ata1: SATA max UDMA/133 mmio [mem 0x2c600000-0x2c60ffff] port 0x100 irq 35 lpm-pol 0
[    8.318239] ahci 2c610000.sata: supply ahci not found, using dummy regulator
[    8.318392] ahci 2c610000.sata: supply phy not found, using dummy regulator
[    8.318434] ahci 2c610000.sata: supply target not found, using dummy regulator
[    8.318625] ahci 2c610000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode
[    8.318638] ahci 2c610000.sata: 1/1 ports implemented (port mask 0x1)
[    8.318645] ahci 2c610000.sata: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part ccc apst 
[    8.318665] ahci 2c610000.sata: port 0 is not capable of FBS
[    8.319417] scsi host1: ahci
[    8.319667] ata2: SATA max UDMA/133 mmio [mem 0x2c610000-0x2c61ffff] port 0x100 irq 36 lpm-pol 0
[    8.335021] [drm] Initialized baikal-vdu 2.0.0 for 30260000.vdu on minor 1
[    8.522691] fbcon: Deferring console take-over
[    8.522708] baikal-vdu 30260000.vdu: [drm] fb0: baikal-vdudrmfb frame buffer device
[    8.629634] ata1: SATA link down (SStatus 0 SControl 300)
[    8.780636] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    8.781327] ata2.00: ATA-9: ADATA SU800NS38, 02K0S86E, max UDMA/133
[    8.781338] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32)
[    8.781745] ata2.00: Features: Dev-Sleep
[    8.782317] ata2.00: configured for UDMA/133
[    8.782734] scsi 1:0:0:0: Direct-Access     ATA      ADATA SU800NS38  S86E PQ: 0 ANSI: 5
[    8.787667] xhci-hcd 2c400000.dwc3: xHCI Host Controller
[    8.787704] xhci-hcd 2c400000.dwc3: new USB bus registered, assigned bus number 1
[    8.787939] xhci-hcd 2c400000.dwc3: USB3 root hub has no ports
[    8.787955] xhci-hcd 2c400000.dwc3: hcc params 0x0230f66d hci version 0x100 quirks 0x0000000000000010
[    8.788000] xhci-hcd 2c400000.dwc3: irq 37, io mem 0x2c400000
[    8.788396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    8.788410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.788418] usb usb1: Product: xHCI Host Controller
[    8.788423] usb usb1: Manufacturer: Linux 6.12.12-6.12-alt1 xhci-hcd
[    8.788429] usb usb1: SerialNumber: 2c400000.dwc3
[    8.789167] hub 1-0:1.0: USB hub found
[    8.789235] hub 1-0:1.0: 2 ports detected
[    8.802304] xhci-hcd 2c500000.dwc3: xHCI Host Controller
[    8.802327] xhci-hcd 2c500000.dwc3: new USB bus registered, assigned bus number 2
[    8.802518] xhci-hcd 2c500000.dwc3: hcc params 0x0268f66d hci version 0x100 quirks 0x0000000000000010
[    8.802563] xhci-hcd 2c500000.dwc3: irq 38, io mem 0x2c500000
[    8.802776] xhci-hcd 2c500000.dwc3: xHCI Host Controller
[    8.802789] xhci-hcd 2c500000.dwc3: new USB bus registered, assigned bus number 3
[    8.802801] xhci-hcd 2c500000.dwc3: Host supports USB 3.0 SuperSpeed
[    8.803160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    8.803175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.803183] usb usb2: Product: xHCI Host Controller
[    8.803189] usb usb2: Manufacturer: Linux 6.12.12-6.12-alt1 xhci-hcd
[    8.803195] usb usb2: SerialNumber: 2c500000.dwc3
[    8.803888] hub 2-0:1.0: USB hub found
[    8.803954] hub 2-0:1.0: 4 ports detected
[    8.804739] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.805017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    8.805027] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.805034] usb usb3: Product: xHCI Host Controller
[    8.805040] usb usb3: Manufacturer: Linux 6.12.12-6.12-alt1 xhci-hcd
[    8.805046] usb usb3: SerialNumber: 2c500000.dwc3
[    8.808109] hub 3-0:1.0: USB hub found
[    8.808160] hub 3-0:1.0: 2 ports detected
[    8.823619] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    8.823674] sd 1:0:0:0: [sda] Write Protect is off
[    8.823683] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.823754] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.823883] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    8.835024]  sda: sda1 sda2 sda3
[    8.837226] sd 1:0:0:0: [sda] Attached SCSI disk
[    9.029618] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    9.047628] usb 2-1: new low-speed USB device number 2 using xhci-hcd
[    9.177180] usb 2-1: New USB device found, idVendor=09da, idProduct=8736, bcdDevice= 1.01
[    9.177199] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.177207] usb 2-1: Product: USB Mouse
[    9.177213] usb 2-1: Manufacturer: SIGMACHIP
[    9.185023] usb 1-1: New USB device found, idVendor=13fe, idProduct=5500, bcdDevice= 1.10
[    9.185038] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.185046] usb 1-1: Product: QUMO
[    9.185052] usb 1-1: Manufacturer:         
[    9.185057] usb 1-1: SerialNumber: 070B821F11BFA478
[    9.298613] usb 1-2: new low-speed USB device number 3 using xhci-hcd
[    9.306613] usb 2-4: new high-speed USB device number 3 using xhci-hcd
[    9.429801] usb 2-4: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    9.429811] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.430373] usb 1-2: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 1.10
[    9.430384] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.430391] usb 1-2: Product: USB Keyboard
[    9.430397] usb 1-2: Manufacturer: CHICONY
[    9.472089] hid: raw HID events driver (C) Jiri Kosina
[    9.475081] hub 2-4:1.0: USB hub found
[    9.475171] hub 2-4:1.0: 4 ports detected
[    9.495797] usbcore: registered new interface driver usbhid
[    9.495808] usbhid: USB HID core driver
[    9.503714] input: SIGMACHIP USB Mouse as /devices/platform/soc/soc:usb3@2c500000/2c500000.dwc3/usb2/2-1/2-1:1.0/0003:09DA:8736.0001/input/input0
[    9.503990] hid-generic 0003:09DA:8736.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP USB Mouse] on usb-2c500000.dwc3-1/input0
[    9.504381] input: CHICONY USB Keyboard as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-2/1-2:1.0/0003:04F2:0833.0002/input/input1
[    9.555793] hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-2c400000.dwc3-2/input0
[    9.556184] input: CHICONY USB Keyboard System Control as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-2/1-2:1.1/0003:04F2:0833.0003/input/input2
[    9.575604] random: crng init done
[    9.606788] input: CHICONY USB Keyboard Consumer Control as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-2/1-2:1.1/0003:04F2:0833.0003/input/input3
[    9.606887] input: CHICONY USB Keyboard as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-2/1-2:1.1/0003:04F2:0833.0003/input/input4
[    9.607216] hid-generic 0003:04F2:0833.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-2c400000.dwc3-2/input1
[   10.063004] PM: Image not found (code -22)
[   10.266319] EXT4-fs (sda3): orphan cleanup on readonly fs
[   10.267952] EXT4-fs (sda3): mounted filesystem e0a55023-995f-47b6-b0ce-a04a9f467692 ro with ordered data mode. Quota mode: none.
[   10.969007] systemd[1]: Inserted module 'autofs4'
[   11.012609] systemd[1]: systemd 255.11-alt1 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   11.012639] systemd[1]: Detected architecture arm64.
[   11.014827] systemd[1]: Hostname set to <comp-154a0e>.
[   11.143430] systemd-sysv-generator[601]: SysV service '/etc/rc.d/init.d/pppoe' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[   11.233981] systemd[1]: /usr/lib/systemd/system/auditd.service:30: PIDFile= references a path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
[   11.314278] systemd[1]: /usr/lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly.
[   11.413472] systemd[1]: /usr/lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
[   11.449280] systemd[1]: Queued start job for default target graphical.target.
[   11.485397] systemd[1]: Created slice system-cups.slice - CUPS Slice.
[   11.487019] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[   11.488467] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   11.489848] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   11.491212] systemd[1]: Created slice system-vconsole\x2dsetup\x2dkludge.slice - Slice /system/vconsole-setup-kludge.
[   11.492302] systemd[1]: Created slice user.slice - User and Session Slice.
[   11.493110] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   11.493285] systemd[1]: Expecting device dev-disk-by\x2duuid-3be7abf7\x2d4f47\x2d4477\x2d8cc9\x2d227804eb59d3.device - /dev/disk/by-uuid/3be7abf7-4f47-4477-8cc9-227804eb59d3...
[   11.493395] systemd[1]: Expecting device dev-disk-by\x2duuid-4C00\x2d52BB.device - /dev/disk/by-uuid/4C00-52BB...
[   11.493523] systemd[1]: Reached target getty.target - Login Prompts.
[   11.493689] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[   11.493832] systemd[1]: Reached target network-pre.target - Preparation for Network.
[   11.493963] systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
[   11.494095] systemd[1]: Reached target slices.target - Slice Units.
[   11.494247] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   11.494714] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[   11.495284] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[   11.495830] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[   11.495968] systemd[1]: Reached target rpcbind.target - RPC Port Mapper.
[   11.496282] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   11.497311] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[   11.497985] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   11.498659] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   11.498873] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   11.499733] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   11.500308] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   11.503785] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[   11.506691] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   11.509687] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   11.512760] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   11.516916] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   11.520832] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   11.524793] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   11.530530] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[   11.537368] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   11.541344] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   11.545198] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[   11.549448] systemd[1]: Starting rpcbind.service - RPC Bind...
[   11.553029] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
[   11.559761] systemd[1]: Starting systemd-journald.service - Journal Service...
[   11.569004] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   11.569189] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   11.569444] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   11.569523] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[   11.569662] device-mapper: uevent: version 1.0.3
[   11.570220] pstore: Using crash dump compression: deflate
[   11.570305] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[   11.571536] (rpcbind)[616]: rpcbind.service: Referenced but unset environment variable evaluates to an empty string: RPCBIND_ARGS
[   11.572988] pstore: Registered efi_pstore as persistent store backend
[   11.574782] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   11.578365] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[   11.583333] systemd[1]: Starting vconsole-setup-kludge@tty1.service - Setup Virtual Console on tty1...
[   11.586287] fuse: init (API version 7.41)
[   11.592438] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[   11.593349] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   11.594054] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   11.594712] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   11.596702] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   11.599197] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   11.599880] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   11.601574] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   11.602350] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   11.604152] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   11.604912] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[   11.606469] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   11.607175] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   11.609543] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   11.610240] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   11.611895] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   11.612522] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[   11.614506] systemd[1]: Started rpcbind.service - RPC Bind.
[   11.627936] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   11.631710] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   11.632064] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   11.635487] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[   11.637278] systemd[1]: Finished systemd-fsck-root.service - File System Check on Root Device.
[   11.642947] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   11.643033] systemd-journald[618]: Collecting audit messages is enabled.
[   11.660165] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   11.661702] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[   11.666979] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[   11.669777] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   11.696058] systemd[1]: Finished vconsole-setup-kludge@tty1.service - Setup Virtual Console on tty1.
[   11.702401] EXT4-fs (sda3): re-mounted e0a55023-995f-47b6-b0ce-a04a9f467692 r/w. Quota mode: none.
[   11.706551] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   11.708153] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   11.708347] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   11.718229] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[   11.718431] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   11.738978] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[   11.740485] systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
[   11.741778] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[   11.745678] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[   11.762734] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[   11.763369] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[   11.798345] systemd[1]: Started systemd-journald.service - Journal Service.
[   11.854390] systemd-journald[618]: Received client request to flush runtime journal.
[   11.866293] systemd-journald[618]: /var/log/journal/6520a9d4b2e9a35cb997639367c805a8/system.journal: Journal file uses a different sequence number ID, rotating.
[   11.866319] systemd-journald[618]: Rotating system journal.
[   12.556925] Adding 16312316k swap on /dev/sda2.  Priority:-2 extents:1 across:16312316k SS
[   12.659363] dw_spi_mmio 20210000.spi: DMA init failed
[   12.717449] panfrost 2a200000.gpu: marking as DMA coherent on BE-M1000
[   12.717525] panfrost 2a200000.gpu: clock rate = 750000000
[   12.717544] panfrost 2a200000.gpu: disabling GPU devfreq on BE-M1000
[   12.717572] panfrost 2a200000.gpu: supply mali not found, using dummy regulator
[   12.724682] panfrost 2a200000.gpu: mali-t620 id 0x620 major 0x1 minor 0x0 status 0x1
[   12.724700] panfrost 2a200000.gpu: features: 00000000,00000408, issues: 00000000,216c4400
[   12.724709] panfrost 2a200000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7
[   12.724719] panfrost 2a200000.gpu: shader_present=0xff l2_present=0x11
[   12.727359] panfrost 2a200000.gpu: using only 1st core group (4 cores from 8)
[   12.734806] hwmon hwmon0: temp1_input not attached to any thermal zone
[   12.742612] [drm] Initialized panfrost 1.2.0 for 2a200000.gpu on minor 0
[   12.744165] hwmon hwmon1: temp1_input not attached to any thermal zone
[   12.763753] sdhci: Secure Digital Host Controller Interface driver
[   12.763769] sdhci: Copyright(c) Pierre Ossman
[   12.778154] hwmon hwmon2: temp1_input not attached to any thermal zone
[   12.780647] hwmon hwmon3: temp1_input not attached to any thermal zone
[   12.788006] sdhci-pltfm: SDHCI platform and OF driver helper
[   12.796216] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   12.802027] at24 1-0053: supply vcc not found, using dummy regulator
[   12.810772] hwmon hwmon4: temp1_input not attached to any thermal zone
[   12.812405] baikal-gmac-dwmac 30240000.ethernet: IRQ eth_wake_irq not found
[   12.812418] baikal-gmac-dwmac 30240000.ethernet: IRQ eth_lpi not found
[   12.812425] baikal-gmac-dwmac 30240000.ethernet: IRQ sfty not found
[   12.812543] baikal-gmac-dwmac 30240000.ethernet: PTP uses main clock
[   12.812565] baikal-gmac-dwmac 30240000.ethernet: couldn't get AXI clock
[   12.812822] baikal-gmac-dwmac 30240000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[   12.816043] at24 1-0053: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[   12.825905] mitx2-bmc 1-0008: bootreason 0:0, extcap 0x21
[   12.828865] input: BMC input dev as /devices/platform/soc/20250000.i2c/i2c-1/1-0008/input/input5
[   12.831306] tp_serio 1-0054: no compatible device found at 1-0054
[   12.834772] pcf857x 1-0050: probed
[   12.856666] mmc0: SDHCI controller on 202e0000.mmc [202e0000.mmc] using ADMA 64-bit
[   12.963737] baikal-gmac-dwmac 30240000.ethernet: 	DWMAC1000
[   12.963757] baikal-gmac-dwmac 30240000.ethernet: DMA HW capability register supported
[   12.963764] baikal-gmac-dwmac 30240000.ethernet: RX Checksum Offload Engine supported
[   12.963771] baikal-gmac-dwmac 30240000.ethernet: COE Type 2
[   12.963777] baikal-gmac-dwmac 30240000.ethernet: TX Checksum insertion supported
[   12.963782] baikal-gmac-dwmac 30240000.ethernet: Wake-Up On Lan supported
[   13.061521] baikal-gmac-dwmac 30240000.ethernet: Enhanced/Alternate descriptors
[   13.061538] baikal-gmac-dwmac 30240000.ethernet: Enabled extended descriptors
[   13.061544] baikal-gmac-dwmac 30240000.ethernet: Ring mode enabled
[   13.061550] baikal-gmac-dwmac 30240000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   13.197681] libphy: fwnode_get_phy_id: considering 'ethernet-phy-ieee802.3-c22'
[   13.197705] libphy: fwnode_get_phy_id: considering 'ethernet-phy-ieee802.3-c22'
[   13.212712] debugfs: Directory '20220000.i2s' with parent 'On-board Audio' already present!
[   13.234215] usb-storage 1-1:1.0: USB Mass Storage device detected
[   13.236619] scsi host2: usb-storage 1-1:1.0
[   13.236957] usbcore: registered new interface driver usb-storage
[   13.242109] usbcore: registered new interface driver uas
[   13.243929] baikal-gmac-dwmac 30250000.ethernet: IRQ eth_wake_irq not found
[   13.243944] baikal-gmac-dwmac 30250000.ethernet: IRQ eth_lpi not found
[   13.243951] baikal-gmac-dwmac 30250000.ethernet: IRQ sfty not found
[   13.244057] baikal-gmac-dwmac 30250000.ethernet: PTP uses main clock
[   13.244079] baikal-gmac-dwmac 30250000.ethernet: couldn't get AXI clock
[   13.244273] baikal-gmac-dwmac 30250000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[   13.315040] input: On-board Audio Headphones as /devices/platform/sound/sound/card1/input6
[   13.315249] input: On-board Audio Mic Jack as /devices/platform/sound/sound/card1/input7
[   13.394647] baikal-gmac-dwmac 30250000.ethernet: 	DWMAC1000
[   13.394669] baikal-gmac-dwmac 30250000.ethernet: DMA HW capability register supported
[   13.394676] baikal-gmac-dwmac 30250000.ethernet: RX Checksum Offload Engine supported
[   13.394682] baikal-gmac-dwmac 30250000.ethernet: COE Type 2
[   13.394688] baikal-gmac-dwmac 30250000.ethernet: TX Checksum insertion supported
[   13.394693] baikal-gmac-dwmac 30250000.ethernet: Wake-Up On Lan supported
[   13.394774] baikal-gmac-dwmac 30250000.ethernet: Enhanced/Alternate descriptors
[   13.394782] baikal-gmac-dwmac 30250000.ethernet: Enabled extended descriptors
[   13.394787] baikal-gmac-dwmac 30250000.ethernet: Ring mode enabled
[   13.394793] baikal-gmac-dwmac 30250000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   13.484617] libphy: fwnode_get_phy_id: considering 'ethernet-phy-ieee802.3-c22'
[   13.484631] libphy: fwnode_get_phy_id: considering 'ethernet-phy-ieee802.3-c22'
[   13.507511] baikal-gmac-dwmac 30250000.ethernet end1: renamed from eth1
[   13.507904] baikal-gmac-dwmac 30240000.ethernet end0: renamed from eth0
[   14.088950] NET: Registered PF_QIPCRTR protocol family
[   14.285770] scsi 2:0:0:0: Direct-Access              QUMO             PMAP PQ: 0 ANSI: 6
[   14.345865] sd 2:0:0:0: [sdb] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB)
[   14.346274] sd 2:0:0:0: [sdb] Write Protect is off
[   14.346285] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
[   14.346582] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   14.363500] GPT:Primary header thinks Alt. header is not at the end of the disk.
[   14.363512] GPT:9156487 != 30302207
[   14.363518] GPT:Alternate GPT header not at the end of the disk.
[   14.363523] GPT:9156487 != 30302207
[   14.363527] GPT: Use GNU Parted to correct GPT errors.
[   14.363547]  sdb: sdb1 sdb2 sdb3
[   14.364051] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   14.655272] baikal-gmac-dwmac 30240000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   14.731661] baikal-gmac-dwmac 30240000.ethernet end0: PHY [stmmac-0:02] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[   14.982344] dwmac1000: Master AXI performs any burst length
[   14.982386] baikal-gmac-dwmac 30240000.ethernet end0: No Safety Features support found
[   14.982415] baikal-gmac-dwmac 30240000.ethernet end0: No MAC Management Counters available
[   14.982443] baikal-gmac-dwmac 30240000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
[   14.982782] baikal-gmac-dwmac 30240000.ethernet end0: registered PTP clock
[   14.983268] baikal-gmac-dwmac 30240000.ethernet end0: configuring for phy/rgmii-rxid link mode
[   15.013961] baikal-gmac-dwmac 30250000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   15.089668] baikal-gmac-dwmac 30250000.ethernet end1: PHY [stmmac-1:02] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[   15.359741] dwmac1000: Master AXI performs any burst length
[   15.359773] baikal-gmac-dwmac 30250000.ethernet end1: No Safety Features support found
[   15.359800] baikal-gmac-dwmac 30250000.ethernet end1: No MAC Management Counters available
[   15.359828] baikal-gmac-dwmac 30250000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported
[   15.360083] baikal-gmac-dwmac 30250000.ethernet end1: registered PTP clock
[   15.360440] baikal-gmac-dwmac 30250000.ethernet end1: configuring for phy/rgmii-rxid link mode
[   18.491650] baikal-gmac-dwmac 30250000.ethernet end1: Link is Up - 1Gbps/Full - flow control off
[   18.513795] NET: Registered PF_PACKET protocol family
[   21.169079] rfkill: input handler disabled
[   54.230793] systemd-journald[618]: /var/log/journal/6520a9d4b2e9a35cb997639367c805a8/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   54.512090] rfkill: input handler enabled
[   59.519043] rfkill: input handler disabled
[   69.362900] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  381.248546] systemd-sysv-generator[17102]: SysV service '/etc/rc.d/init.d/pppoe' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[  557.027815] GPT:Primary header thinks Alt. header is not at the end of the disk.
[  557.027831] GPT:9156487 != 30302207
[  557.027837] GPT:Alternate GPT header not at the end of the disk.
[  557.027841] GPT:9156487 != 30302207
[  557.027846] GPT: Use GNU Parted to correct GPT errors.
[  557.027869]  sdb: sdb1 sdb2 sdb3
[  948.161438] block loop7: the capability attribute has been deprecated.
[  948.621624] WARNING! power/level is deprecated; use power/control instead
