--- Miniterm on /dev/ttyUSB0 1500000,8,N,1 --- --- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H --- DDR 03ea844c5d typ 24/09/03-10:42:57,fwver: v1.23 ln wdqs_if: 0x1010100 LP4/4x derate en, other dram:1x trefi ddrconfig:0 MID:0x6 LPDDR4, 324MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB tdqss_lf: cs0 dqs0: 48ps, dqs1: -96ps, dqs2: -48ps, dqs3: -144ps, tdqss_hf: cs0 dqs0: 48ps, dqs1: -96ps, dqs2: -48ps, dqs3: -144ps, change to: 324MHz PHY drv:clk:38,ca:38,DQ:30,odt:0 vrefinner:41%, vrefout:41% dram drv:40,odt:0 clk skew:0x61 change to: 528MHz PHY drv:clk:38,ca:38,DQ:30,odt:0 vrefinner:41%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 780MHz PHY drv:clk:38,ca:38,DQ:30,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 rx vref: 18.4% tx vref: 38.0% change to: 1560MHz(final freq) PHY drv:clk:38,ca:38,DQ:30,odt:60 vrefinner:16%, vrefout:29% dram drv:40,odt:80 vref_ca:00000068 clk skew:0x1c rx vref: 17.4% tx vref: 32.0% cs 0: rdtrn RS: DQS0:0x37, DQS1:0x36, DQS2:0x39, DQS3:0x30, min :0x10 0x14 0x15 0x12 0x3 0x4 0x9 0x6 , 0xa 0x8 0x4 0x1 0xc 0xe 0xf 0xd , 0x12 0xf 0xc 0xa 0x5 0x5 0x1 0x7 , 0xc 0x9 0x8 0x2 0xe 0x11 0xa 0x10 , mid :0x2b 0x2e 0x2f 0x2c 0x1d 0x1d 0x23 0x21 ,0x25 0x23 0x1d 0x1c 0x27 0x27 0x28 0x27 , 0x2d 0x2a 0x24 0x24 0x1f 0x1b 0x1a 0x20 ,0x25 0x22 0x20 0x1a 0x28 0x29 0x23 0x29 , max :0x46 0x48 0x49 0x46 0x38 0x37 0x3d 0x3d ,0x40 0x3f 0x36 0x37 0x42 0x40 0x42 0x42 , 0x49 0x46 0x3d 0x3f 0x39 0x32 0x33 0x39 ,0x3f 0x3b 0x39 0x33 0x43 0x42 0x3d 0x42 , range:0x36 0x34 0x34 0x34 0x35 0x33 0x34 0x37 ,0x36 0x37 0x32 0x36 0x36 0x32 0x33 0x35 , 0x37 0x37 0x31 0x35 0x34 0x2d 0x32 0x32 ,0x33 0x32 0x31 0x31 0x35 0x31 0x33 0x32 , wrtrn RS: DQS0:0x25, DQS1:0x9, DQS2:0x13, DQS3:0x0, min :0x7e 0x85 0x86 0x7d 0x6d 0x73 0x78 0x77 0x75 ,0x5b 0x58 0x53 0x50 0x5d 0x5f 0x5f 0x5e 0x57 , 0x71 0x6f 0x69 0x66 0x5e 0x5f 0x5e 0x66 0x67 ,0x5f 0x5a 0x57 0x51 0x60 0x62 0x5c 0x63 0x5a , mid :0x98 0x9c 0x9e 0x97 0x86 0x8b 0x91 0x90 0x8f ,0x76 0x74 0x6c 0x69 0x77 0x77 0x78 0x76 0x70 , 0x8d 0x8b 0x81 0x80 0x7a 0x76 0x76 0x7d 0x7f ,0x79 0x74 0x72 0x6a 0x7a 0x7c 0x75 0x7d 0x73 , max :0xb2 0xb4 0xb6 0xb1 0x9f 0xa4 0xab 0xa9 0xa9 ,0x92 0x90 0x86 0x82 0x92 0x90 0x91 0x8f 0x89 , 0xa9 0xa8 0x9a 0x9b 0x96 0x8d 0x8f 0x95 0x98 ,0x93 0x8e 0x8d 0x84 0x95 0x96 0x8f 0x98 0x8c , range:0x34 0x2f 0x30 0x34 0x32 0x31 0x33 0x32 0x34 ,0x37 0x38 0x33 0x32 0x35 0x31 0x32 0x31 0x32 , 0x38 0x39 0x31 0x35 0x38 0x2e 0x31 0x2f 0x31 ,0x34 0x34 0x36 0x33 0x35 0x34 0x33 0x35 0x32 , CBT RS: cs:0 min :0x52 0x4b 0x49 0x3c 0x4a 0x3b 0x43 ,0x50 0x45 0x4c 0x37 0x43 0x35 0x45 , cs:0 mid :0x8b 0x8e 0x82 0x7d 0x82 0x7f 0x6e ,0x88 0x89 0x84 0x7b 0x7d 0x7a 0x6f , cs:0 max :0xc4 0xd1 0xbc 0xbf 0xbb 0xc4 0x99 ,0xc1 0xcd 0xbc 0xbf 0xb8 0xbf 0x9a , cs:0 range:0x72 0x86 0x73 0x83 0x71 0x89 0x56 ,0x71 0x88 0x70 0x88 0x75 0x8a 0x55 , out U-Boot SPL 2026.01 (Jan 13 2026 - 13:13:18 +0000) Trying to boot from MMC2 ## Checking hash(es) for config config-3 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-3 ... sha256+ OK ## Checking hash(es) for Image atf-2 ... sha256+ OK ## Checking hash(es) for Image atf-3 ... sha256+ OK NOTICE: BL31: v2.14.0(release): NOTICE: BL31: Built : 10:41:36, Nov 27 2025 NOTICE: BL31: Rockchip release version: v1.0 U-Boot 2026.01 (Jan 13 2026 - 13:13:18 +0000) Model: Anbernic RG503 SoC: RK3566 DRAM: 1 GiB (total 1022 MiB) PMIC: RK817 (on=0x80, off=0x04) Core: 601 devices, 27 uclasses, devicetree: separate MMC: mmc@fe000000: 2, mmc@fe2b0000: 1, mmc@fe2c0000: 3 Loading Environment from nowhere... OK In: serial@fe660000 Out: serial@fe660000 Err: serial@fe660000 Model: Anbernic RG503 SoC: RK3566 Hit any key to stop autoboot: 2 Hit any key to stop autoboot: 1 Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning bootdev 'mmc@fe2b0000.bootdev': 0 extlinux ready mmc 2 mmc@fe2b0000.bootdev.part /extlinux/extlinux.conf ** Booting bootflow 'mmc@fe2b0000.bootdev.part_2' with extlinux ALTLinux Boot Options 1: linux 2: 6.18.15-rocknix-alt1 Enter choice: 1: linux Retrieving file: /extlinux/../vmlinuz Retrieving file: /extlinux/../initrd.img append: root=UUID=18586084-bd2d-40f9-b890-b7e7de0b4e80 ro splash psi=1 console=tty0 console=ttyS2,1500000n8 Retrieving file: /extlinux/../dtb/rockchip/rk3566-anbernic-rg503.dtb ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Working FDT set to 12000000 Loading Ramdisk to 3afd9000, end 3cf24737 ... OK Loading Device Tree to 000000003afc6000, end 000000003afd808f ... OK Working FDT set to 3afc6000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.18.15-rocknix-alt1 (builder@localhost.localdomain) (gcc-14 (GCC) 14.3.1 20251017 (ALT Sisyphus 14.3.1-alt2), GNU ld (GNU Binutils) 2.43.1.20241025) #1 SMP PREEMPT_DYNAMIC Mon Mar 2 07:37:38 UTC 2026 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Anbernic RG503 [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x000000000010f000..0x000000000010f0ff (0 KiB) nomap non-reusable shmem@10f000 [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000003fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3fda5cc0-0x3fda8abf] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x000000003fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 256 MiB at 0x000000002ae00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 34 pages/cpu s99608 r8192 d31464 u139264 [ 0.000000] pcpu-alloc: s99608 r8192 d31464 u139264 alloc=34*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GICv3 CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=UUID=18586084-bd2d-40f9-b890-b7e7de0b4e80 ro splash psi=1 console=tty0 console=ttyS2,1500000n8 [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x000000003ea00000-0x000000003eb00000] (1MB) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261632 [ 0.000000] Policy zone: DMA [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 55021 entries in 216 pages [ 0.000000] ftrace: allocated 216 pages with 4 groups [ 0.000000] Dynamic Preempt: voluntary [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: enabling workaround for GICv3: non-coherent attribute [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: MBI range [296:319] [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3568002 [ 0.000000] GIC: enabling workaround for ITS: non-coherent attribute [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @5f0000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @600000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000000610000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000620000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001059] Console: colour dummy device 80x25 [ 0.001083] printk: legacy console [tty0] enabled [ 0.002266] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.002315] pid_max: default: 32768 minimum: 301 [ 0.002568] LSM: initializing lsm=capability,landlock,yama,safesetid,bpf,altha,kiosk,ima [ 0.002900] landlock: Up and running. [ 0.002925] Yama: becoming mindful. [ 0.003636] LSM support for eBPF active [ 0.003660] AltHa disabled. [ 0.003690] Kiosk: Netlink family registered. [ 0.003960] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.004006] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.008472] rcu: Hierarchical SRCU implementation. [ 0.008525] rcu: Max phase no-delay instances is 400. [ 0.009007] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.010894] EFI services will not be available. [ 0.011568] smp: Bringing up secondary CPUs ... [ 0.012755] Detected VIPT I-cache on CPU1 [ 0.012927] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.012953] GICv3: CPU1: using allocated LPI pending table @0x0000000000630000 [ 0.013019] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.014331] Detected VIPT I-cache on CPU2 [ 0.014495] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.014520] GICv3: CPU2: using allocated LPI pending table @0x0000000000640000 [ 0.014576] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.015955] Detected VIPT I-cache on CPU3 [ 0.016115] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.016138] GICv3: CPU3: using allocated LPI pending table @0x0000000000650000 [ 0.016190] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.016388] smp: Brought up 1 node, 4 CPUs [ 0.016577] SMP: Total of 4 processors activated. [ 0.016595] CPU: All CPU(s) started at EL2 [ 0.016614] CPU features: detected: 32-bit EL0 Support [ 0.016632] CPU features: detected: 32-bit EL1 Support [ 0.016652] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.016677] CPU features: detected: Common not Private translations [ 0.016697] CPU features: detected: CRC32 instructions [ 0.016716] CPU features: detected: Data cache clean to Point of Persistence [ 0.016745] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.016765] CPU features: detected: LSE atomic instructions [ 0.016784] CPU features: detected: Privileged Access Never [ 0.016802] CPU features: detected: PMUv3 [ 0.016819] CPU features: detected: RAS Extension Support [ 0.016846] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.016952] alternatives: applying system-wide alternatives [ 0.029915] node 0 deferred pages initialised in 7ms [ 0.030052] Memory: 692896K/1046528K available (17600K kernel code, 2554K rwdata, 7704K rodata, 2816K init, 534K bss, 85596K reserved, 262144K cma-reserved) [ 0.031385] devtmpfs: initialized [ 0.052044] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.052154] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.052256] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). [ 0.057286] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.057347] 0 pages in range for non-PLT usage [ 0.057355] 516432 pages in range for PLT usage [ 0.057843] pinctrl core: initialized pinctrl subsystem [ 0.059318] DMI not present or invalid. [ 0.063741] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.066220] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.066785] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.067401] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.067518] audit: initializing netlink subsys (disabled) [ 0.067918] audit: type=2000 audit(0.061:1): state=initialized audit_enabled=0 res=1 [ 0.069452] thermal_sys: Registered thermal governor 'fair_share' [ 0.069467] thermal_sys: Registered thermal governor 'bang_bang' [ 0.069497] thermal_sys: Registered thermal governor 'step_wise' [ 0.069520] thermal_sys: Registered thermal governor 'user_space' [ 0.069540] thermal_sys: Registered thermal governor 'power_allocator' [ 0.069707] cpuidle: using governor ladder [ 0.069806] cpuidle: using governor menu [ 0.070377] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.070619] ASID allocator initialised with 65536 entries [ 0.071853] Serial: AMBA PL011 UART driver [ 0.091024] /vop@fe040000: Fixed dependency cycle(s) with /dsi@fe060000 [ 0.091179] /dsi@fe060000: Fixed dependency cycle(s) with /vop@fe040000 [ 0.092068] /vop@fe040000: Fixed dependency cycle(s) with /hdmi@fe0a0000 [ 0.092225] /hdmi@fe0a0000: Fixed dependency cycle(s) with /vop@fe040000 [ 0.114109] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.115295] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.116067] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.116627] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.117347] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.117889] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.118495] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.119056] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.119799] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.120326] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.123414] /hdmi@fe0a0000: Fixed dependency cycle(s) with /hdmi-con [ 0.123590] /hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000 [ 0.127347] /spi/panel@0: Fixed dependency cycle(s) with /dsi@fe060000 [ 0.132279] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.132362] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.132389] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.132410] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.132432] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.132452] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.132476] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.132495] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.136660] fbcon: Taking over console [ 0.138573] iommu: Default domain type: Translated [ 0.138622] iommu: DMA domain TLB invalidation policy: strict mode [ 0.141199] SCSI subsystem initialized [ 0.141641] usbcore: registered new interface driver usbfs [ 0.141733] usbcore: registered new interface driver hub [ 0.141815] usbcore: registered new device driver usb [ 0.142160] pps_core: LinuxPPS API ver. 1 registered [ 0.142188] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.142242] PTP clock support registered [ 0.142374] EDAC MC: Ver: 3.0.0 [ 0.143059] scmi_core: SCMI protocol bus registered [ 0.145979] NetLabel: Initializing [ 0.146025] NetLabel: domain hash size = 128 [ 0.146046] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.146168] NetLabel: unlabeled traffic allowed by default [ 0.146460] vgaarb: loaded [ 0.147165] clocksource: Switched to clocksource arch_sys_counter [ 0.148125] VFS: Disk quotas dquot_6.6.0 [ 0.148261] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.166653] NET: Registered PF_INET protocol family [ 0.166870] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.168790] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.168946] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.169129] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.169359] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.169632] TCP: Hash tables configured (established 8192 bind 8192) [ 0.170017] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) [ 0.170177] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.170261] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.170571] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.170652] NET: Registered PF_XDP protocol family [ 0.170716] PCI: CLS 0 bytes, default 64 [ 0.171127] Trying to unpack rootfs image as initramfs... [ 0.179873] kvm [1]: nv: 568 coarse grained trap handlers [ 0.180712] kvm [1]: IPA Size Limit: 40 bits [ 0.180803] kvm [1]: GICv3: no GICV resource entry [ 0.180831] kvm [1]: disabling GICv2 emulation [ 0.180891] kvm [1]: GIC system register CPU interface enabled [ 0.180951] kvm [1]: vgic interrupt IRQ9 [ 0.181037] kvm [1]: VHE mode initialized successfully [ 0.242719] Initialise system trusted keyrings [ 0.242813] Key type blacklist registered [ 0.243651] workingset: timestamp_bits=42 max_order=18 bucket_order=0 [ 0.245194] Key type asymmetric registered [ 0.245252] Asymmetric key parser 'x509' registered [ 0.245417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241) [ 0.245883] io scheduler mq-deadline registered [ 0.266695] ledtrig-cpu: registered to indicate activity on CPUs [ 0.281952] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.287221] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 21, base_baud = 1500000) is a 16550A [ 0.287638] serial serial0: tty port ttyS1 registered [ 0.289625] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 22, base_baud = 1500000) is a 16550A [ 0.289767] printk: legacy console [ttyS2] enabled [ 0.420791] platform fdea0000.video-codec: Adding to iommu group 0 [ 0.423717] platform fdee0000.video-codec: Adding to iommu group 1 [ 0.426452] platform fe040000.vop: Adding to iommu group 2 [ 0.459958] panel@0 enforce active low on GPIO handle [ 0.466571] usbcore: registered new interface driver cdc_acm [ 0.467128] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.468002] usbcore: registered new interface driver cdc_wdm [ 0.468592] ehci-platform fd880000.usb: EHCI Host Controller [ 0.468608] usbcore: registered new device driver onboard-usb-dev [ 0.469371] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 0.470552] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 1 [ 0.471516] ehci-platform fd880000.usb: irq 26, io mem 0xfd880000 [ 0.471745] mousedev: PS/2 mouse device common for all mice [ 0.472139] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 2 [ 0.473517] ohci-platform fd8c0000.usb: irq 27, io mem 0xfd8c0000 [ 0.474372] i2c_dev: i2c /dev entries driver [ 0.477039] /i2c@fdd40000/pmic@20: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/regulators/BOOST [ 0.477237] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 0.478988] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 [ 0.479817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.480518] usb usb1: Product: EHCI Host Controller [ 0.480975] usb usb1: Manufacturer: Linux 6.18.15-rocknix-alt1 ehci_hcd [ 0.481613] usb usb1: SerialNumber: fd880000.usb [ 0.483030] hub 1-0:1.0: USB hub found [ 0.483511] hub 1-0:1.0: 1 port detected [ 0.528579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 [ 0.529410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.530083] usb usb2: Product: Generic Platform OHCI controller [ 0.530669] usb usb2: Manufacturer: Linux 6.18.15-rocknix-alt1 ohci_hcd [ 0.531307] usb usb2: SerialNumber: fd8c0000.usb [ 0.532618] hub 2-0:1.0: USB hub found [ 0.533078] hub 2-0:1.0: 1 port detected [ 0.593314] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey.2.auto/input/input0 [ 0.607031] rk808-rtc rk808-rtc.3.auto: registered as rtc0 [ 0.610368] rk808-rtc rk808-rtc.3.auto: setting system clock to 2017-08-05T09:12:40 UTC (1501924360) [ 0.615080] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 0.657549] sdhci: Secure Digital Host Controller Interface driver [ 0.658180] sdhci: Copyright(c) Pierre Ossman [ 0.658674] Synopsys Designware Multimedia Card Interface Driver [ 0.660764] dwmmc_rockchip fe000000.mmc: IDMAC supports 32-bit address mode. [ 0.661003] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.661478] dwmmc_rockchip fe000000.mmc: Using internal DMA controller. [ 0.662604] dwmmc_rockchip fe000000.mmc: Version ID is 270a [ 0.663222] dwmmc_rockchip fe000000.mmc: DW MMC controller at irq 57,32 bit host data width,256 deep fifo [ 0.663373] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 0.664818] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 0.665464] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 0.667506] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 0.668258] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 0.668288] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 58,32 bit host data width,256 deep fifo [ 0.668858] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 0.670217] arm-scmi arm-scmi.7.auto: Using scmi_smc_transport [ 0.670299] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo [ 0.670762] arm-scmi arm-scmi.7.auto: SCMI max-rx-timeout: 30ms / max-msg-size: 104bytes / max-msg: 20 [ 0.672963] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 [ 0.674032] dwmmc_rockchip fe2c0000.mmc: Got CD GPIO [ 0.674198] arm-scmi arm-scmi.7.auto: SCMI Notifications - Core Enabled. [ 0.674928] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 0.675181] arm-scmi arm-scmi.7.auto: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.676444] arm-scmi arm-scmi.7.auto: Enabling SCMI Quirk [quirk_clock_rates_triplet_out_of_spec] [ 0.690274] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 0.692217] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 0.765985] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 0.768031] dwmmc_rockchip fe2b0000.mmc: All phases bad! [ 0.768560] mmc0: tuning execution failed: -5 [ 0.768975] mmc0: error -5 whilst initialising SD card [ 0.786300] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 0.858878] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 0.860876] dwmmc_rockchip fe2b0000.mmc: All phases bad! [ 0.861404] mmc0: tuning execution failed: -5 [ 0.879274] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 0.926719] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 0.927761] mmc0: new high speed SDHC card at address 59b4 [ 0.929743] mmcblk0: mmc0:59b4 USD 29.8 GiB [ 0.934332] mmcblk0: p1 p2 p3 [ 1.828381] Freeing initrd memory: 32044K [ 21.658152] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 21.658738] rcu: 2-...!: (2 GPs behind) idle=13f0/0/0x0 softirq=146/147 fqs=1 (false positive?) [ 21.659543] rcu: (detected by 0, t=21003 jiffies, g=-899, q=828 ncpus=4) [ 21.660163] Sending NMI from CPU 0 to CPUs 2: [ 28.025149] watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [swapper/0:1] [ 28.025164] CPU#3 Utilization every 4000ms during lockup: [ 28.025170] #1: 100% system, 0% softirq, 1% hardirq, 0% idle [ 28.025180] #2: 100% system, 0% softirq, 1% hardirq, 0% idle [ 28.025188] #3: 100% system, 0% softirq, 1% hardirq, 0% idle [ 28.025196] #4: 100% system, 0% softirq, 1% hardirq, 0% idle [ 28.025203] #5: 100% system, 0% softirq, 1% hardirq, 0% idle [ 28.025212] Modules linked in: [ 28.025226] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.15-rocknix-alt1 #1 PREEMPT(voluntary) [ 28.025239] Hardware name: Anbernic RG503 (DT) [ 28.025245] pstate: 00000009 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.025255] pc : smp_call_function_many_cond+0x11c/0x718 [ 28.025278] lr : smp_call_function_many_cond+0x2d8/0x718 [ 28.025291] sp : ffff80008003b960 [ 28.025295] x29: ffff80008003b960 x28: ffffcea18bb9fbf0 x27: 0000000000000003 [ 28.025311] x26: 0000000000000000 x25: ffff00003fd75e00 x24: 0000000000000003 [ 28.025325] x23: ffff00003fd75e10 x22: ffffcea18bb9fbf0 x21: 0000000000000000 [ 28.025340] x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000006 [ 28.025354] x17: 73657461725f6b63 x16: 6f6c635f6b726975 x15: 0720072007200720 [ 28.025368] x14: 0720072007200720 x13: 0720072007200720 x12: ffffcea18bc244b8 [ 28.025381] x11: ffff00003fd75e08 x10: 0000000000000002 x9 : ffffcea18a763e70 [ 28.025395] x8 : ffffcea18bb9fbf0 x7 : 0000000000000000 x6 : 0000000000010000 [ 28.025408] x5 : 0000000000000003 x4 : ffffffffffffffff x3 : 0000000000000002 [ 28.025421] x2 : 0000000000000000 x1 : ffff00003fd5b268 x0 : 0000000000000011 [ 28.025435] Call trace: [ 28.025441] smp_call_function_many_cond+0x11c/0x718 (P) [ 28.025458] kick_all_cpus_sync+0x4c/0x80 [ 28.025472] arch_jump_label_transform_apply+0x18/0x30 [ 28.025490] __jump_label_update+0x118/0x130 [ 28.025506] jump_label_update+0xec/0x128 [ 28.025520] static_key_enable_cpuslocked+0x94/0xd8 [ 28.025534] static_key_enable+0x28/0x50 [ 28.025546] scmi_quirks_enable+0x14c/0x160 [ 28.025565] scmi_probe+0x4fc/0x920 [ 28.025581] platform_probe+0x64/0xc0 [ 28.025597] really_probe+0xc8/0x3a0 [ 28.025610] __driver_probe_device+0x84/0x160 [ 28.025623] driver_probe_device+0x44/0x130 [ 28.025635] __driver_attach+0xcc/0x208 [ 28.025647] bus_for_each_dev+0x84/0x100 [ 28.025658] driver_attach+0x2c/0x40 [ 28.025670] bus_add_driver+0x118/0x250 [ 28.025681] driver_register+0x70/0x138 [ 28.025694] __platform_driver_register+0x2c/0x40 [ 28.025708] scmi_driver_init+0x68/0x80 [ 28.025725] do_one_initcall+0x60/0x2d8 [ 28.025742] kernel_init_freeable+0x244/0x2c8 [ 28.025759] kernel_init+0x2c/0x168 [ 28.025775] ret_from_fork+0x10/0x20 [ 28.025791] Kernel panic - not syncing: softlockup: hung tasks [ 28.049338] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G L 6.18.15-rocknix-alt1 #1 PREEMPT(voluntary) [ 28.050338] Tainted: [L]=SOFTLOCKUP [ 28.050660] Hardware name: Anbernic RG503 (DT) [ 28.051067] Call trace: [ 28.051299] show_stack+0x34/0x98 (C) [ 28.051655] dump_stack_lvl+0x60/0x80 [ 28.052008] dump_stack+0x18/0x24 [ 28.052328] vpanic+0x104/0x2d0 [ 28.052632] trace_suspend_resume+0x0/0x98 [ 28.053018] watchdog_timer_fn+0x494/0x638 [ 28.053411] __hrtimer_run_queues+0x16c/0x2b0 [ 28.053825] hrtimer_interrupt+0xf4/0x268 [ 28.054202] arch_timer_handler_phys+0x3c/0x60 [ 28.054623] handle_percpu_devid_irq+0x88/0x220 [ 28.055053] handle_irq_desc+0x3c/0x68 [ 28.055408] generic_handle_domain_irq+0x24/0x40 [ 28.055842] gic_handle_irq+0x54/0x140 [ 28.056194] call_on_irq_stack+0x30/0x48 [ 28.056563] do_interrupt_handler+0x88/0x98 [ 28.056957] el1_interrupt+0x3c/0x60 [ 28.057298] el1h_64_irq_handler+0x18/0x28 [ 28.057686] el1h_64_irq+0x70/0x78 [ 28.058008] smp_call_function_many_cond+0x11c/0x718 (P) [ 28.058505] kick_all_cpus_sync+0x4c/0x80 [ 28.058883] arch_jump_label_transform_apply+0x18/0x30 [ 28.059365] __jump_label_update+0x118/0x130 [ 28.059768] jump_label_update+0xec/0x128 [ 28.060149] static_key_enable_cpuslocked+0x94/0xd8 [ 28.060606] static_key_enable+0x28/0x50 [ 28.060977] scmi_quirks_enable+0x14c/0x160 [ 28.061376] scmi_probe+0x4fc/0x920 [ 28.061711] platform_probe+0x64/0xc0 [ 28.062063] really_probe+0xc8/0x3a0 [ 28.062404] __driver_probe_device+0x84/0x160 [ 28.062814] driver_probe_device+0x44/0x130 [ 28.063207] __driver_attach+0xcc/0x208 [ 28.063572] bus_for_each_dev+0x84/0x100 [ 28.063941] driver_attach+0x2c/0x40 [ 28.064281] bus_add_driver+0x118/0x250 [ 28.064641] driver_register+0x70/0x138 [ 28.065005] __platform_driver_register+0x2c/0x40 [ 28.065445] scmi_driver_init+0x68/0x80 [ 28.065812] do_one_initcall+0x60/0x2d8 [ 28.066178] kernel_init_freeable+0x244/0x2c8 [ 28.066591] kernel_init+0x2c/0x168 [ 28.066927] ret_from_fork+0x10/0x20 [ 28.067266] SMP: stopping secondary CPUs [ 29.234297] SMP: failed to stop secondary CPUs 0,2 [ 29.234743] Kernel Offset: 0x4ea10a000000 from 0xffff800080000000 [ 29.235296] PHYS_OFFSET: 0x0 [ 29.235565] CPU features: 0x0c0000,00008000,48046281,0401721b [ 29.236090] Memory Limit: none [ 29.236394] ------------[ cut here ]------------ [ 29.236817] Voluntary context switch within RCU read-side critical section! [ 29.236848] WARNING: CPU: 3 PID: 1 at kernel/rcu/tree_plugin.h:332 rcu_note_context_switch+0x508/0x5a0 [ 29.238326] Modules linked in: [ 29.238622] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G L 6.18.15-rocknix-alt1 #1 PREEMPT(voluntary) [ 29.239620] Tainted: [L]=SOFTLOCKUP [ 29.239942] Hardware name: Anbernic RG503 (DT) [ 29.240349] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 29.240982] pc : rcu_note_context_switch+0x508/0x5a0 [ 29.241449] lr : rcu_note_context_switch+0x508/0x5a0 [ 29.241912] sp : ffff80008001b900 [ 29.242221] x29: ffff80008001b900 x28: ffff00003fd74b40 x27: ffff00000481cf00 [ 29.242885] x26: ffffcea18bb9fbf0 x25: ffff80008001ba38 x24: 0000000000000000 [ 29.243546] x23: 0000000000000000 x22: ffff000000731380 x21: ffffcea18bad2a40 [ 29.244207] x20: 0000000000000000 x19: ffff00003fd75a40 x18: 0000000000000006 [ 29.244867] x17: 2020204c20202020 x16: 2020202020202020 x15: 0720072007200720 [ 29.245526] x14: 0720072d072d072d x13: 216e6f6974636573 x12: ffffcea18bbd5468 [ 29.246187] x11: ffffcea18bbcc510 x10: ffffcea18bc24510 x9 : ffffcea18a17619c [ 29.246847] x8 : fffffffffffe6880 x7 : 0000000000002718 x6 : 80000000fffff1a1 [ 29.247506] x5 : 0000000000008f58 x4 : 0000000000000000 x3 : 0000000000000000 [ 29.248165] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000731380 [ 29.248825] Call trace: [ 29.249057] rcu_note_context_switch+0x508/0x5a0 (P) [ 29.249525] __schedule+0xd0/0xd38 [ 29.249854] schedule+0x3c/0x120 [ 29.250167] schedule_preempt_disabled+0x2c/0x50 [ 29.250600] __mutex_lock.constprop.0+0xb04/0xc90 [ 29.251038] __mutex_lock_slowpath+0x1c/0x38 [ 29.251435] mutex_lock+0x6c/0x88 [ 29.251750] regmap_lock_mutex+0x18/0x30 [ 29.252126] regmap_update_bits_base+0x4c/0xa8 [ 29.252542] rk808_restart+0x6c/0x90 [ 29.252885] sys_off_notify+0x44/0x80 [ 29.253235] notifier_call_chain+0x80/0x148 [ 29.253634] atomic_notifier_call_chain+0x44/0x70 [ 29.254077] do_kernel_restart+0x2c/0x40 [ 29.254448] machine_restart+0x3c/0x68 [ 29.254804] emergency_restart+0x34/0x48 [ 29.255173] vpanic+0x250/0x2d0 [ 29.255476] trace_suspend_resume+0x0/0x98 [ 29.255862] watchdog_timer_fn+0x494/0x638 [ 29.256254] __hrtimer_run_queues+0x16c/0x2b0 [ 29.256669] hrtimer_interrupt+0xf4/0x268 [ 29.257045] arch_timer_handler_phys+0x3c/0x60 [ 29.257466] handle_percpu_devid_irq+0x88/0x220 [ 29.257894] handle_irq_desc+0x3c/0x68 [ 29.258250] generic_handle_domain_irq+0x24/0x40 [ 29.258682] gic_handle_irq+0x54/0x140 [ 29.259036] call_on_irq_stack+0x30/0x48 [ 29.259405] do_interrupt_handler+0x88/0x98 [ 29.259799] el1_interrupt+0x3c/0x60 [ 29.260139] el1h_64_irq_handler+0x18/0x28 [ 29.260526] el1h_64_irq+0x70/0x78 [ 29.260850] smp_call_function_many_cond+0x11c/0x718 (P) [ 29.261345] kick_all_cpus_sync+0x4c/0x80 [ 29.261724] arch_jump_label_transform_apply+0x18/0x30 [ 29.262205] __jump_label_update+0x118/0x130 [ 29.262610] jump_label_update+0xec/0x128 [ 29.262990] static_key_enable_cpuslocked+0x94/0xd8 [ 29.263446] static_key_enable+0x28/0x50 [ 29.263817] scmi_quirks_enable+0x14c/0x160 [ 29.264216] scmi_probe+0x4fc/0x920 [ 29.264551] platform_probe+0x64/0xc0 [ 29.264901] really_probe+0xc8/0x3a0 [ 29.265241] __driver_probe_device+0x84/0x160 [ 29.265650] driver_probe_device+0x44/0x130 [ 29.266044] __driver_attach+0xcc/0x208 [ 29.266409] bus_for_each_dev+0x84/0x100 [ 29.266780] driver_attach+0x2c/0x40 [ 29.267120] bus_add_driver+0x118/0x250 [ 29.267483] driver_register+0x70/0x138 [ 29.267847] __platform_driver_register+0x2c/0x40 [ 29.268287] scmi_driver_init+0x68/0x80 [ 29.268655] do_one_initcall+0x60/0x2d8 [ 29.269022] kernel_init_freeable+0x244/0x2c8 [ 29.269435] kernel_init+0x2c/0x168 [ 29.269770] ret_from_fork+0x10/0x20 [ 29.270109] ---[ end trace 0000000000000000 ]--- --- exit ---