[    0.000000] Linux version 6.1.91-std-def-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt3), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP PREEMPT_DYNAMIC Fri May 17 12:28:23 UTC 2024
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-std-def root=UUID=72f723a9-452d-49a8-9007-14b48af3c82c ro resume=/dev/disk/by-uuid/b5d8aeba-956b-476d-b8d7-e4e24f375a99 panic=30 quiet loglevel=3 splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000972a5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000972a6000-0x0000000097ba5fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000097ba6000-0x0000000097ca5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000097ca6000-0x000000009efbefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f1befff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009f1bf000-0x000000009f8befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f0a00000-0x00000000f0afffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi: ESRT=0x9f26aa18 SMBIOS=0x9f266000 SMBIOS 3.0=0x9f264000 ACPI 2.0=0x9fbfe014 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Acer Aspire ES1-523/TRICERA_CZL, BIOS V1.04 07/05/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.848 MHz processor
[    0.000042] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000049] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000065] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000964] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001379] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
[    0.010476] esrt: Reserving ESRT space from 0x000000009f26aa18 to 0x000000009f26aa50.
[    0.010498] Using GB pages for direct mapping
[    0.011643] Secure boot enabled
[    0.011645] RAMDISK: [mem 0x315bb000-0x34ad4fff]
[    0.011660] ACPI: Early table checksum verification disabled
[    0.011669] ACPI: RSDP 0x000000009FBFE014 000024 (v02 ACRSYS)
[    0.011680] ACPI: XSDT 0x000000009FBC6188 0000CC (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.011693] ACPI: FACP 0x000000009FBF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011704] ACPI: DSDT 0x000000009FBE7000 00670C (v01 ACRSYS ACRPRDCT 00040000 1025 00040000)
[    0.011711] ACPI: FACS 0x000000009FB5A000 000040
[    0.011717] ACPI: HPET 0x000000009FBF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011723] ACPI: UEFI 0x000000009FBFC000 001036 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011730] ACPI: UEFI 0x000000009FBFB000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.011736] ACPI: SSDT 0x000000009FBF5000 00542E (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.011742] ACPI: ASF! 0x000000009FBF4000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011749] ACPI: BOOT 0x000000009FBF3000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011755] ACPI: APIC 0x000000009FBF0000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011761] ACPI: MCFG 0x000000009FBEF000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011767] ACPI: SPCR 0x000000009FBEE000 000050 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011773] ACPI: SSDT 0x000000009FBE6000 000CB4 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.011779] ACPI: SSDT 0x000000009FBE0000 0048CE (v02 AMD    AGESA    00000002 MSFT 04000000)
[    0.011786] ACPI: CRAT 0x000000009FBDF000 0003A8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011792] ACPI: VFCT 0x000000009FBD0000 00EC84 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011798] ACPI: SSDT 0x000000009FBCF000 000462 (v01 Insyde TPMACPI  00001000 INTL 20120913)
[    0.011804] ACPI: TPM2 0x000000009FBCE000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.011811] ACPI: SSDT 0x000000009FBCC000 0014B2 (v01 AMD    CPMDFIGP 00000001 INTL 20120913)
[    0.011817] ACPI: SSDT 0x000000009FBCA000 0015B8 (v01 AMD    CPMCMN   00000001 INTL 20120913)
[    0.011823] ACPI: FPDT 0x000000009FBC9000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.011829] ACPI: SSDT 0x000000009FBC8000 00009B (v01 AMD?CH FCHACPI  00001000 INTL 20120913)
[    0.011836] ACPI: BGRT 0x000000009FBC7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011841] ACPI: Reserving FACP table memory at [mem 0x9fbf2000-0x9fbf210b]
[    0.011844] ACPI: Reserving DSDT table memory at [mem 0x9fbe7000-0x9fbed70b]
[    0.011846] ACPI: Reserving FACS table memory at [mem 0x9fb5a000-0x9fb5a03f]
[    0.011848] ACPI: Reserving HPET table memory at [mem 0x9fbf1000-0x9fbf1037]
[    0.011850] ACPI: Reserving UEFI table memory at [mem 0x9fbfc000-0x9fbfd035]
[    0.011852] ACPI: Reserving UEFI table memory at [mem 0x9fbfb000-0x9fbfb041]
[    0.011854] ACPI: Reserving SSDT table memory at [mem 0x9fbf5000-0x9fbfa42d]
[    0.011856] ACPI: Reserving ASF! table memory at [mem 0x9fbf4000-0x9fbf40a4]
[    0.011858] ACPI: Reserving BOOT table memory at [mem 0x9fbf3000-0x9fbf3027]
[    0.011859] ACPI: Reserving APIC table memory at [mem 0x9fbf0000-0x9fbf008f]
[    0.011861] ACPI: Reserving MCFG table memory at [mem 0x9fbef000-0x9fbef03b]
[    0.011863] ACPI: Reserving SPCR table memory at [mem 0x9fbee000-0x9fbee04f]
[    0.011865] ACPI: Reserving SSDT table memory at [mem 0x9fbe6000-0x9fbe6cb3]
[    0.011867] ACPI: Reserving SSDT table memory at [mem 0x9fbe0000-0x9fbe48cd]
[    0.011869] ACPI: Reserving CRAT table memory at [mem 0x9fbdf000-0x9fbdf3a7]
[    0.011871] ACPI: Reserving VFCT table memory at [mem 0x9fbd0000-0x9fbdec83]
[    0.011873] ACPI: Reserving SSDT table memory at [mem 0x9fbcf000-0x9fbcf461]
[    0.011875] ACPI: Reserving TPM2 table memory at [mem 0x9fbce000-0x9fbce033]
[    0.011877] ACPI: Reserving SSDT table memory at [mem 0x9fbcc000-0x9fbcd4b1]
[    0.011879] ACPI: Reserving SSDT table memory at [mem 0x9fbca000-0x9fbcb5b7]
[    0.011881] ACPI: Reserving FPDT table memory at [mem 0x9fbc9000-0x9fbc9043]
[    0.011883] ACPI: Reserving SSDT table memory at [mem 0x9fbc8000-0x9fbc809a]
[    0.011885] ACPI: Reserving BGRT table memory at [mem 0x9fbc7000-0x9fbc7037]
[    0.012002] No NUMA configuration found
[    0.012004] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.012022] NODE_DATA(0) allocated [mem 0x21efde000-0x21effffff]
[    0.012641] Zone ranges:
[    0.012642]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012646]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012649]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.012652] Movable zone start for each node
[    0.012658] Early memory node ranges
[    0.012659]   node   0: [mem 0x0000000000001000-0x0000000000086fff]
[    0.012662]   node   0: [mem 0x0000000000088000-0x000000000009ffff]
[    0.012664]   node   0: [mem 0x0000000000100000-0x00000000972a5fff]
[    0.012666]   node   0: [mem 0x0000000097ca6000-0x000000009efbefff]
[    0.012668]   node   0: [mem 0x000000009fbff000-0x000000009fbfffff]
[    0.012670]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.012674] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.012685] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012688] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012776] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.037135] On node 0, zone DMA32: 2560 pages in unavailable ranges
[    0.037289] On node 0, zone DMA32: 3136 pages in unavailable ranges
[    0.082274] On node 0, zone Normal: 1024 pages in unavailable ranges
[    0.082467] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.082562] ACPI: PM-Timer IO Port: 0x408
[    0.082582] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.082586] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.082588] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.082590] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.082605] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.082613] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.082617] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.082622] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.082630] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.082633] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.082659] e820: update [mem 0x9c9c5000-0x9cab8fff] usable ==> reserved
[    0.082685] ACPI: SPCR: SPCR table version 1
[    0.082689] ACPI: SPCR: console: uart,io,0x3f8,115200
[    0.082694] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.082741] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.082745] PM: hibernation: Registered nosave memory: [mem 0x00087000-0x00087fff]
[    0.082749] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.082753] PM: hibernation: Registered nosave memory: [mem 0x972a6000-0x97ba5fff]
[    0.082754] PM: hibernation: Registered nosave memory: [mem 0x97ba6000-0x97ca5fff]
[    0.082758] PM: hibernation: Registered nosave memory: [mem 0x9c9c5000-0x9cab8fff]
[    0.082761] PM: hibernation: Registered nosave memory: [mem 0x9efbf000-0x9f1befff]
[    0.082763] PM: hibernation: Registered nosave memory: [mem 0x9f1bf000-0x9f8befff]
[    0.082764] PM: hibernation: Registered nosave memory: [mem 0x9f8bf000-0x9fbbefff]
[    0.082766] PM: hibernation: Registered nosave memory: [mem 0x9fbbf000-0x9fbfefff]
[    0.082769] PM: hibernation: Registered nosave memory: [mem 0x9fc00000-0xf09fffff]
[    0.082771] PM: hibernation: Registered nosave memory: [mem 0xf0a00000-0xf0afffff]
[    0.082773] PM: hibernation: Registered nosave memory: [mem 0xf0b00000-0xf7ffffff]
[    0.082774] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.082776] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.082777] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.082779] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.082780] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.082782] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.082783] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.082785] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.082786] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.082788] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.082789] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.082793] [mem 0x9fc00000-0xf09fffff] available for PCI devices
[    0.082796] Booting paravirtualized kernel on bare hardware
[    0.082802] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.090723] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.091874] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[    0.091909] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[    0.091918] pcpu-alloc: [0] 0 1 2 3 
[    0.092000] Fallback order for Node 0: 0 
[    0.092008] Built 1 zonelists, mobility grouping on.  Total pages: 1795433
[    0.092011] Policy zone: Normal
[    0.092015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-std-def root=UUID=72f723a9-452d-49a8-9007-14b48af3c82c ro resume=/dev/disk/by-uuid/b5d8aeba-956b-476d-b8d7-e4e24f375a99 panic=30 quiet loglevel=3 splash
[    0.092222] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-std-def", will be passed to user space.
[    0.097121] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.099638] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.099741] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.099757] software IO TLB: area num 4.
[    0.261558] Memory: 6946516K/7296376K available (14343K kernel code, 2588K rwdata, 9712K rodata, 3032K init, 16476K bss, 349600K reserved, 0K cma-reserved)
[    0.261888] ftrace: allocating 44686 entries in 175 pages
[    0.282159] ftrace: allocated 175 pages with 6 groups
[    0.284194] Dynamic Preempt: voluntary
[    0.284265] rcu: Preemptible hierarchical RCU implementation.
[    0.284267] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.284270] 	Trampoline variant of Tasks RCU enabled.
[    0.284272] 	Rude variant of Tasks RCU enabled.
[    0.284272] 	Tracing variant of Tasks RCU enabled.
[    0.284274] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.284276] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.294572] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
[    0.294834] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.295771] Console: colour dummy device 80x25
[    0.295815] printk: console [tty0] enabled
[    0.295873] ACPI: Core revision 20220331
[    0.296212] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.296246] APIC: Switch to symmetric I/O mode setup
[    0.296828] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.301243] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa6e0b1296, max_idle_ns: 440795315420 ns
[    0.301259] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.69 BogoMIPS (lpj=2195848)
[    0.301288] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[    0.301319] LVT offset 1 assigned for vector 0xf9
[    0.301328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.301331] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.301340] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.301345] Spectre V2 : Mitigation: Retpolines
[    0.301347] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.301348] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.301350] RETBleed: Mitigation: untrained return thunk
[    0.301354] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.301372] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.301375] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.301377] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.301380] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.301383] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.336456] Freeing SMP alternatives memory: 40K
[    0.336476] pid_max: default: 32768 minimum: 301
[    0.340382] LSM: Security Framework initializing
[    0.340423] landlock: Up and running.
[    0.340425] Yama: becoming mindful.
[    0.340454] LSM support for eBPF active
[    0.340456] AltHa disabled.
[    0.340469] Kiosk: Netlink family registered.
[    0.341269] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.341331] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.445420] smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[    0.445774] cblist_init_generic: Setting adjustable number of callback queues.
[    0.445778] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.445827] cblist_init_generic: Setting adjustable number of callback queues.
[    0.445829] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.445877] cblist_init_generic: Setting adjustable number of callback queues.
[    0.445879] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.445925] Performance Events: AMD PMU driver.
[    0.445935] ... version:                0
[    0.445937] ... bit width:              48
[    0.445938] ... generic registers:      4
[    0.445940] ... value mask:             0000ffffffffffff
[    0.445942] ... max period:             00007fffffffffff
[    0.445944] ... fixed-purpose events:   0
[    0.445945] ... event mask:             000000000000000f
[    0.446141] signal: max sigframe size: 1776
[    0.446204] rcu: Hierarchical SRCU implementation.
[    0.446207] rcu: 	Max phase no-delay instances is 400.
[    0.446680] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.446875] smp: Bringing up secondary CPUs ...
[    0.447213] x86: Booting SMP configuration:
[    0.447216] .... node  #0, CPUs:      #1 #2 #3
[    0.452407] smp: Brought up 1 node, 4 CPUs
[    0.452407] smpboot: Max logical packages: 1
[    0.452407] ----------------
[    0.452407] | NMI testsuite:
[    0.452407] --------------------
[    0.452407]   remote IPI:  ok  |
[    0.452407]    local IPI:  ok  |
[    0.452407] --------------------
[    0.452407] Good, all   2 testcases passed! |
[    0.452407] ---------------------------------
[    0.452407] smpboot: Total of 4 processors activated (17566.78 BogoMIPS)
[    0.455692] devtmpfs: initialized
[    0.455692] x86/mm: Memory block size: 128MB
[    0.457567] ACPI: PM: Registering ACPI NVS region [mem 0x97ba6000-0x97ca5fff] (1048576 bytes)
[    0.457567] ACPI: PM: Registering ACPI NVS region [mem 0x9f8bf000-0x9fbbefff] (3145728 bytes)
[    0.457594] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.457608] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.457728] pinctrl core: initialized pinctrl subsystem
[    0.460046] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.460429] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.460453] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.460472] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.460530] audit: initializing netlink subsys (disabled)
[    0.460555] audit: type=2000 audit(1720613914.164:1): state=initialized audit_enabled=0 res=1
[    0.460580] thermal_sys: Registered thermal governor 'fair_share'
[    0.460584] thermal_sys: Registered thermal governor 'bang_bang'
[    0.460586] thermal_sys: Registered thermal governor 'step_wise'
[    0.460588] thermal_sys: Registered thermal governor 'user_space'
[    0.460623] cpuidle: using governor ladder
[    0.460633] cpuidle: using governor menu
[    0.461290] Simple Boot Flag at 0x44 set to 0x1
[    0.461331] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.461336] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.461483] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.461498] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.461534] PCI: Using configuration type 1 for base access
[    0.464492] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.464503] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.464503] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.464503] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.464503] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.465418] ACPI: Added _OSI(Module Device)
[    0.465418] ACPI: Added _OSI(Processor Device)
[    0.465418] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.465418] ACPI: Added _OSI(Processor Aggregator Device)
[    0.481872] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.484774] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.486957] ACPI: EC: EC started
[    0.486959] ACPI: EC: interrupt blocked
[    0.487524] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.487530] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.487533] ACPI: Interpreter enabled
[    0.487572] ACPI: PM: (supports S0 S3 S4 S5)
[    0.487575] ACPI: Using IOAPIC for interrupt routing
[    0.487886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.487889] PCI: Using E820 reservations for host bridge windows
[    0.488248] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.544807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.544827] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.544974] acpi PNP0A08:00: _OSC: platform does not support [LTR DPC]
[    0.545230] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.545234] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.545254] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.545777] PCI host bridge to bus 0000:00
[    0.545781] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.545785] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.545788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.545792] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[    0.545796] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[    0.545799] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.545803] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.545806] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.545831] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[    0.545938] pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
[    0.545953] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.545964] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.545971] pci 0000:00:01.0: reg 0x20: [io  0x3000-0x30ff]
[    0.545978] pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
[    0.545985] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.545993] pci 0000:00:01.0: enabling Extended Tags
[    0.546009] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.546043] pci 0000:00:01.0: supports D1 D2
[    0.546045] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.546201] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.546222] pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
[    0.546253] pci 0000:00:01.1: enabling Extended Tags
[    0.546290] pci 0000:00:01.1: supports D1 D2
[    0.546370] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[    0.546456] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[    0.546490] pci 0000:00:02.2: enabling Extended Tags
[    0.546536] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.546698] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    0.546731] pci 0000:00:02.3: enabling Extended Tags
[    0.546773] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.546906] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[    0.546918] pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
[    0.546925] pci 0000:00:08.0: reg 0x18: [mem 0xf0b00000-0xf0bfffff]
[    0.546931] pci 0000:00:08.0: reg 0x1c: [mem 0xf0d70000-0xf0d70fff]
[    0.546940] pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
[    0.547039] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.547060] pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
[    0.547157] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.547305] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.547319] pci 0000:00:11.0: reg 0x10: [io  0x3118-0x311f]
[    0.547328] pci 0000:00:11.0: reg 0x14: [io  0x3124-0x3127]
[    0.547337] pci 0000:00:11.0: reg 0x18: [io  0x3110-0x3117]
[    0.547345] pci 0000:00:11.0: reg 0x1c: [io  0x3120-0x3123]
[    0.547353] pci 0000:00:11.0: reg 0x20: [io  0x3100-0x310f]
[    0.547362] pci 0000:00:11.0: reg 0x24: [mem 0xf0d6c000-0xf0d6c3ff]
[    0.547399] pci 0000:00:11.0: PME# supported from D3hot
[    0.547518] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[    0.548547] pci 0000:00:12.0: reg 0x10: [mem 0xf0d6f000-0xf0d6f0ff]
[    0.552273] pci 0000:00:12.0: supports D1 D2
[    0.552276] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.552401] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[    0.553548] pci 0000:00:13.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff]
[    0.556863] pci 0000:00:13.0: supports D1 D2
[    0.556866] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.556984] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.557410] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.557428] pci 0000:00:14.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff 64bit]
[    0.557490] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.557630] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.557826] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[    0.557844] pci 0000:00:14.7: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff 64bit]
[    0.557906] pci 0000:00:14.7: PME# supported from D3cold
[    0.558024] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[    0.558100] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[    0.558173] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[    0.558255] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[    0.558376] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[    0.558448] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[    0.558587] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.558606] pci 0000:01:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.558630] pci 0000:01:00.0: reg 0x18: [mem 0xf0c04000-0xf0c04fff 64bit]
[    0.558647] pci 0000:01:00.0: reg 0x20: [mem 0xf0c00000-0xf0c03fff 64bit]
[    0.558745] pci 0000:01:00.0: supports D1 D2
[    0.558747] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.558922] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.558930] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
[    0.558934] pci 0000:00:02.2:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    0.559123] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[    0.559307] pci 0000:02:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit]
[    0.560016] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.560906] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.560913] pci 0000:00:02.3:   bridge window [mem 0xf0800000-0xf09fffff]
[    0.609221] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.609347] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.609463] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.609591] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.609687] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.609763] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.609839] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.609914] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.610263] ACPI: EC: interrupt unblocked
[    0.610266] ACPI: EC: event unblocked
[    0.610277] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.610280] ACPI: EC: GPE=0x3
[    0.610283] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[    0.610287] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[    0.611257] iommu: Default domain type: Translated 
[    0.611260] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.611390] ACPI: bus type USB registered
[    0.611425] usbcore: registered new interface driver usbfs
[    0.611440] usbcore: registered new interface driver hub
[    0.611455] usbcore: registered new device driver usb
[    0.611503] pps_core: LinuxPPS API ver. 1 registered
[    0.611506] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.611513] PTP clock support registered
[    0.611534] Registered efivars operations
[    0.612462] NetLabel: Initializing
[    0.612464] NetLabel:  domain hash size = 128
[    0.612466] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.612493] NetLabel:  unlabeled traffic allowed by default
[    0.612503] PCI: Using ACPI for IRQ routing
[    0.614021] PCI: pci_cache_line_size set to 64 bytes
[    0.614176] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
[    0.614180] e820: reserve RAM buffer [mem 0x972a6000-0x97ffffff]
[    0.614183] e820: reserve RAM buffer [mem 0x9c9c5000-0x9fffffff]
[    0.614186] e820: reserve RAM buffer [mem 0x9efbf000-0x9fffffff]
[    0.614188] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[    0.614191] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.614264] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.614269] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.614271] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.614283] vgaarb: loaded
[    0.614353] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.614361] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.616372] clocksource: Switched to clocksource tsc-early
[    0.633110] VFS: Disk quotas dquot_6.6.0
[    0.633144] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.633342] pnp: PnP ACPI init
[    0.633644] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.633651] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.634185] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.634190] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.634194] system 00:04: [io  0x04d6] has been reserved
[    0.634198] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.634201] system 00:04: [io  0x0c14] has been reserved
[    0.634204] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.634207] system 00:04: [io  0x0c6c] has been reserved
[    0.634210] system 00:04: [io  0x0c6f] has been reserved
[    0.634213] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    0.634327] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.634332] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[    0.680675] pnp: PnP ACPI: found 6 devices
[    0.688772] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.688926] NET: Registered PF_INET protocol family
[    0.689183] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.691947] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.691977] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.691984] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.692156] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.692909] TCP: Hash tables configured (established 65536 bind 65536)
[    0.693259] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.693308] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.693356] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.693483] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.693499] NET: Registered PF_XDP protocol family
[    0.693533] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.693541] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
[    0.693547] pci 0000:00:02.2:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    0.693555] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.693560] pci 0000:00:02.3:   bridge window [mem 0xf0800000-0xf09fffff]
[    0.693577] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.693581] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.693584] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.693587] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
[    0.693590] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[    0.693593] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xf7ffffff window]
[    0.693596] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
[    0.693600] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.693602] pci_bus 0000:01: resource 1 [mem 0xf0c00000-0xf0cfffff]
[    0.693606] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf09fffff]
[    0.693763] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.711057] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 11650 usecs
[    0.711077] pci 0000:00:12.0: PME# does not work under D3, disabling it
[    0.723042] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 11669 usecs
[    0.723062] pci 0000:00:13.0: PME# does not work under D3, disabling it
[    0.723156] PCI: CLS 64 bytes, default 64
[    0.723179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.723181] software IO TLB: mapped [mem 0x00000000989c5000-0x000000009c9c5000] (64MB)
[    0.723259] LVT offset 0 assigned for vector 0x400
[    0.723282] Trying to unpack rootfs image as initramfs...
[    0.723430] perf: AMD IBS detected (0x000000ff)
[    0.724149] Initialise system trusted keyrings
[    0.724305] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.724376] zbud: loaded
[    0.743537] Key type asymmetric registered
[    0.743552] Asymmetric key parser 'x509' registered
[    0.743603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.743744] io scheduler mq-deadline registered
[    0.743772] io scheduler bfq registered
[    0.744332] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.744335] crc32: self tests passed, processed 225944 bytes in 196158 nsec
[    0.744540] crc32c: CRC_LE_BITS = 64
[    0.744542] crc32c: self tests passed, processed 112972 bytes in 98666 nsec
[    0.762348] crc32_combine: 8373 self tests passed
[    0.780128] crc32c_combine: 8373 self tests passed
[    0.781221] pcieport 0000:00:02.2: PME: Signaling with IRQ 25
[    0.781476] pcieport 0000:00:02.3: PME: Signaling with IRQ 27
[    0.781762] ACPI: \_PR_.C000: Found 2 idle states
[    0.781912] ACPI: \_PR_.C001: Found 2 idle states
[    0.782118] ACPI: \_PR_.C002: Found 2 idle states
[    0.782338] ACPI: \_PR_.C003: Found 2 idle states
[    0.782746] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.783688] Linux agpgart interface v0.103
[    0.784214] tpm_crb MSFT0101:00: can't request region for resource [mem 0x9fbb6000-0x9fbb9fff]
[    0.784222] tpm_crb: probe of MSFT0101:00 failed with error -16
[    0.784290] ACPI: bus type drm_connector registered
[    0.788710] brd: module loaded
[    0.790625] loop: module loaded
[    0.791367] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.810328] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.810354] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.810688] mousedev: PS/2 mouse device common for all mice
[    0.810768] rtc_cmos 00:01: RTC can wake from S4
[    0.811035] rtc_cmos 00:01: registered as rtc0
[    0.811057] rtc_cmos 00:01: setting system clock to 2024-07-10T12:18:34 UTC (1720613914)
[    0.811104] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.811271] ledtrig-cpu: registered to indicate activity on CPUs
[    0.811628] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.814648] fbcon: Deferring console take-over
[    0.814660] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.819638] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.838856] NET: Registered PF_INET6 protocol family
[    0.839418] Segment Routing with IPv6
[    0.839421] RPL Segment Routing with IPv6
[    0.839437] In-situ OAM (IOAM) with IPv6
[    0.839535] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[    0.840041] microcode: CPU0: patch_level=0x07030105
[    0.840050] microcode: CPU1: patch_level=0x07030105
[    0.840060] microcode: CPU2: patch_level=0x07030105
[    0.840071] microcode: CPU3: patch_level=0x07030105
[    0.840078] microcode: Microcode Update Driver: v2.2.
[    0.840084] IPI shorthand broadcast: enabled
[    0.840131] sched_clock: Marking stable (838508429, 1390707)->(853408610, -13509474)
[    0.840475] registered taskstats version 1
[    0.840492] Loading compiled-in X.509 certificates
[    0.842241] Loaded X.509 cert 'Build time autogenerated kernel key: e2897f7195cbfd53b9ca1cca9bab81f9a777b59b'
[    0.844373] zswap: loaded using pool zstd/zbud
[    0.844746] Key type .fscrypt registered
[    0.844749] Key type fscrypt-provisioning registered
[    1.724027] Freeing initrd memory: 54376K
[    1.731235] Key type encrypted registered
[    1.731263] ima: No TPM chip found, activating TPM-bypass!
[    1.731268] ima: Allocated hash algorithm: sha512
[    1.731291] ima: No architecture policies found
[    1.731316] evm: Initialising EVM extended attributes:
[    1.731317] evm: security.selinux
[    1.731319] evm: security.SMACK64
[    1.731321] evm: security.SMACK64EXEC
[    1.731322] evm: security.SMACK64TRANSMUTE
[    1.731323] evm: security.SMACK64MMAP
[    1.731325] evm: security.apparmor
[    1.731326] evm: security.ima
[    1.731327] evm: security.capability
[    1.731328] evm: HMAC attrs: 0x1
[    1.734527] clk: Disabling unused clocks
[    1.736835] Freeing unused decrypted memory: 2036K
[    1.737460] tsc: Refined TSC clocksource calibration: 2195.881 MHz
[    1.737473] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ffc1640, max_idle_ns: 440795239502 ns
[    1.738154] Freeing unused kernel image (initmem) memory: 3032K
[    1.738198] clocksource: Switched to clocksource tsc
[    1.738213] Write protecting the kernel read-only data: 26624k
[    1.739313] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.739659] Freeing unused kernel image (rodata/data gap) memory: 528K
[    1.739670] rodata_test: all tests were successful
[    1.739683] Run /init as init process
[    1.739686]   with arguments:
[    1.739688]     /init
[    1.739689]     splash
[    1.739691]   with environment:
[    1.739692]     HOME=/
[    1.739694]     TERM=linux
[    1.739695]     BOOT_IMAGE=/boot/vmlinuz-std-def
[    2.342521] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.342874] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    2.391683] SCSI subsystem initialized
[    2.432782] libata version 3.00 loaded.
[    2.447497] ahci 0000:00:11.0: version 3.0
[    2.447785] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.447793] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    2.454354] scsi host0: ahci
[    2.457599] scsi host1: ahci
[    2.457713] ata1: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c100 irq 19
[    2.457720] ata2: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c180 irq 19
[    2.620127] [drm] radeon kernel modesetting enabled.
[    2.634214] radeon 0000:00:01.0: vgaarb: deactivate vga console
[    2.634691] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x1025:0x108A 0x45).
[    2.634727] [drm] doorbell mmio base: 0xF0000000
[    2.634730] [drm] doorbell mmio size: 8388608
[    2.634775] ATOM BIOS: AMD
[    2.634880] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.634887] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[    2.634895] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.634898] [drm] RAM width 128bits DDR
[    2.634950] [drm] radeon: 1024M of VRAM memory ready
[    2.634954] [drm] radeon: 2048M of GTT memory ready.
[    2.634972] [drm] Loading mullins Microcode
[    2.635217] [drm] Internal thermal controller without fan control
[    2.638003] [drm] radeon: dpm initialized
[    2.638216] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[    2.639883] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[    2.644494] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    2.697513] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[    2.697689] radeon 0000:00:01.0: WB enabled
[    2.697711] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[    2.697716] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[    2.697720] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[    2.697724] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[    2.697727] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[    2.698322] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[    2.698561] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[    2.698566] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[    2.698783] radeon 0000:00:01.0: radeon: using MSI.
[    2.698821] [drm] radeon: irq initialized.
[    2.701883] [drm] ring test on 0 succeeded in 2 usecs
[    2.701964] [drm] ring test on 1 succeeded in 2 usecs
[    2.701984] [drm] ring test on 2 succeeded in 2 usecs
[    2.702174] [drm] ring test on 3 succeeded in 3 usecs
[    2.702182] [drm] ring test on 4 succeeded in 3 usecs
[    2.720438] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.720465] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.723956] ata2.00: ATAPI: Slimtype DVD A  DA8AESH, XA11, max UDMA/133
[    2.724748] ata2.00: configured for UDMA/133
[    2.728232] [drm] ring test on 5 succeeded in 1 usecs
[    2.728254] [drm] UVD initialized successfully.
[    2.747087] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1P5J, max UDMA/100
[    2.747404] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.749106] ata1.00: configured for UDMA/100
[    2.749345] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 5J   PQ: 0 ANSI: 5
[    2.753689] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DA8AESH   XA11 PQ: 0 ANSI: 5
[    2.838371] [drm] ring test on 6 succeeded in 13 usecs
[    2.838381] [drm] ring test on 7 succeeded in 2 usecs
[    2.838383] [drm] VCE initialized successfully.
[    2.839305] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.839455] [drm] ib test on ring 1 succeeded in 0 usecs
[    2.839593] [drm] ib test on ring 2 succeeded in 0 usecs
[    2.839733] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.839871] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.872787] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.872799] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.872828] sd 0:0:0:0: [sda] Write Protect is off
[    2.872833] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.872873] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.872935] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    2.996507]  sda: sda1 sda2 sda3 sda4
[    2.996987] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.344546] [drm] ib test on ring 5 succeeded
[    3.345282] [drm] ib test on ring 6 succeeded
[    3.345826] [drm] ib test on ring 7 succeeded
[    3.346818] [drm] radeon atom DIG backlight initialized
[    3.346822] [drm] Radeon Display Connectors
[    3.346823] [drm] Connector 0:
[    3.346825] [drm]   HDMI-A-1
[    3.346827] [drm]   HPD1
[    3.346828] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    3.346832] [drm]   Encoders:
[    3.346833] [drm]     DFP1: INTERNAL_UNIPHY
[    3.346835] [drm] Connector 1:
[    3.346836] [drm]   eDP-1
[    3.346837] [drm]   HPD2
[    3.346839] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    3.346842] [drm]   Encoders:
[    3.346843] [drm]     LCD1: INTERNAL_UNIPHY
[    3.977847] [drm] fb mappable at 0xE0731000
[    3.977856] [drm] vram apper at 0xE0000000
[    3.977858] [drm] size 8294400
[    3.977859] [drm] fb depth is 24
[    3.977860] [drm]    pitch is 7680
[    3.978052] fbcon: radeondrmfb (fb0) is primary device
[    3.978055] fbcon: Deferring console take-over
[    3.978059] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[    3.991671] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    4.000595] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    6.903250] [drm] amdgpu kernel modesetting enabled.
[    6.915635] amdgpu: Ignoring ACPI CRAT on non-APU system
[    6.915642] amdgpu: Virtual CRAT table created for CPU
[    6.915669] amdgpu: Topology: Add CPU node
[    9.689256] PM: Image not found (code -22)
[    9.829000] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    9.829010] EXT4-fs (sda3): write access will be enabled during recovery
[   10.410433] random: crng init done
[   10.683848] EXT4-fs (sda3): recovery complete
[   10.706231] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[   12.759607] systemd[1]: Inserted module 'autofs4'
[   12.999528] systemd[1]: systemd 255.6-alt2 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   12.999625] systemd[1]: Detected architecture x86-64.
[   13.075748] systemd[1]: Hostname set to <proxy5then>.
[   13.427129] systemd-sysv-generator[728]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[   13.584239] systemd-sysv-generator[728]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[   14.404857] systemd[1]: /usr/lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly.
[   14.452402] systemd[1]: /usr/lib/systemd/system/anacron.service:12: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   14.452430] systemd[1]: /usr/lib/systemd/system/anacron.service:13: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   14.822938] systemd[1]: Queued start job for default target graphical.target.
[   14.872938] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[   14.873917] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   14.874688] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   14.875467] systemd[1]: Created slice system-vconsole\x2dsetup\x2dkludge.slice - Slice /system/vconsole-setup-kludge.
[   14.876044] systemd[1]: Created slice user.slice - User and Session Slice.
[   14.876483] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   14.876568] systemd[1]: Expecting device dev-disk-by\x2duuid-A561\x2d4712.device - /dev/disk/by-uuid/A561-4712...
[   14.876625] systemd[1]: Expecting device dev-disk-by\x2duuid-b5c5f83b\x2d9ff9\x2d419b\x2da37a\x2dd4abd8fdd4a8.device - /dev/disk/by-uuid/b5c5f83b-9ff9-419b-a37a-d4abd8fdd4a8...
[   14.876681] systemd[1]: Expecting device dev-disk-by\x2duuid-b5d8aeba\x2d956b\x2d476d\x2db8d7\x2de4e24f375a99.device - /dev/disk/by-uuid/b5d8aeba-956b-476d-b8d7-e4e24f375a99...
[   14.876752] systemd[1]: Reached target getty.target - Login Prompts.
[   14.876819] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[   14.876906] systemd[1]: Reached target network-pre.target - Preparation for Network.
[   14.876979] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[   14.877050] systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
[   14.877132] systemd[1]: Reached target slices.target - Slice Units.
[   14.877230] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   14.877452] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[   14.877779] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[   14.878019] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[   14.878087] systemd[1]: Reached target rpcbind.target - RPC Port Mapper.
[   14.878232] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   14.878831] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[   14.879127] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   14.879467] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   14.879597] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   14.885472] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   14.885947] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   14.886244] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
[   14.907690] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[   14.909809] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   14.911808] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   14.913877] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   14.916757] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   14.921983] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   14.924553] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   14.927218] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   14.934577] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[   14.937252] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   14.945137] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   14.954686] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[   14.991599] systemd[1]: Starting rpcbind.service - RPC Bind...
[   14.991982] (rpcbind)[744]: rpcbind.service: Referenced but unset environment variable evaluates to an empty string: RPCBIND_ARGS
[   14.993571] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
[   14.997143] systemd[1]: Starting systemd-journald.service - Journal Service...
[   15.016249] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   15.016366] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   15.016543] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   15.018545] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   15.020995] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[   15.029423] pstore: Using crash dump compression: zstd
[   15.042911] systemd[1]: Starting vconsole-setup-kludge@tty1.service - Setup Virtual Console on tty1...
[   15.053981] pstore: Registered efi as persistent store backend
[   15.058593] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[   15.058956] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   15.059260] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   15.059607] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   15.060187] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   15.061143] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   15.061630] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   15.062530] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   15.062892] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[   15.063987] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   15.064491] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   15.065484] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   15.065833] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[   15.078754] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   15.080967] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[   15.084725] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   15.089601] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[   15.089632] device-mapper: uevent: version 1.0.3
[   15.089802] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   15.091169] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   15.091587] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   15.092101] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   15.153651] fuse: init (API version 7.37)
[   15.155378] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   15.155704] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   15.163785] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   15.171966] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[   15.610707] systemd-journald[746]: Collecting audit messages is enabled.
[   15.903726] systemd[1]: Started systemd-journald.service - Journal Service.
[   16.473424] EXT4-fs (sda3): re-mounted. Quota mode: none.
[   16.772202] vboxdrv: loading out-of-tree module taints kernel.
[   16.772813] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   16.801590] vboxdrv: Found 4 processor cores/threads
[   16.817835] vboxdrv: TSC mode is Invariant, tentative frequency 2195863430 Hz
[   16.817846] vboxdrv: Successfully loaded version 7.0.18 r162988 (interface 0x00330004)
[   16.874653] VBoxNetFlt: Successfully started.
[   16.896027] VBoxNetAdp: Successfully started.
[   16.923040] systemd-journald[746]: Received client request to flush runtime journal.
[   16.953480] systemd-journald[746]: File /var/log/journal/d62c46bcd402e67b99e1aaed668dacc8/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   18.713024] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   18.713255] ACPI: button: Power Button [PWRB]
[   18.713343] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[   18.713822] ACPI: button: Sleep Button [SLPB]
[   18.713901] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C0D:00/input/input5
[   18.714012] ACPI: button: Lid Switch [LID0]
[   18.714079] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   18.714208] ACPI: button: Power Button [PWRF]
[   18.726223] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20220331/utaddress-204)
[   18.726240] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   18.759475] ACPI: battery: Slot [BAT1] (battery absent)
[   18.789284] ACPI: AC: AC Adapter [ACAD] (on-line)
[   18.803807] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   18.803969] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[   18.804133] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[   18.903100] acpi_cpufreq: overriding BIOS provided _PSD data
[   19.107041] ccp 0000:00:08.0: 4 command queues available
[   19.111873] ccp 0000:00:08.0: ccp enabled
[   19.116704] ehci-pci 0000:00:12.0: EHCI Host Controller
[   19.116727] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[   19.116738] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   19.116749] ehci-pci 0000:00:12.0: debug port 2
[   19.116823] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6f000
[   19.121962] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   19.123489] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[   19.123864] hub 1-0:1.0: USB hub found
[   19.123879] hub 1-0:1.0: 2 ports detected
[   19.126000] ehci-pci 0000:00:13.0: EHCI Host Controller
[   19.127172] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[   19.127187] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   19.127198] ehci-pci 0000:00:13.0: debug port 2
[   19.127245] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0d6e000
[   19.133439] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[   19.133814] hub 2-0:1.0: USB hub found
[   19.133829] hub 2-0:1.0: 2 ports detected
[   19.276344] xhci_hcd 0000:00:10.0: xHCI Host Controller
[   19.276377] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[   19.276613] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[   19.277681] xhci_hcd 0000:00:10.0: xHCI Host Controller
[   19.277698] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[   19.277711] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[   19.281122] hub 3-0:1.0: USB hub found
[   19.281164] hub 3-0:1.0: 2 ports detected
[   19.282413] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.283229] hub 4-0:1.0: USB hub found
[   19.283264] hub 4-0:1.0: 2 ports detected
[   19.301737] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   19.318724] r8169 0000:01:00.0 eth0: RTL8168h/8111h, fc:45:96:ee:7e:df, XID 541, IRQ 38
[   19.318739] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   19.362441] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   19.378455] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   19.419216] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   19.419232] cdrom: Uniform CD-ROM driver Revision: 3.20
[   19.419475] sdhci: Secure Digital Host Controller Interface driver
[   19.419478] sdhci: Copyright(c) Pierre Ossman
[   19.451949] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   19.466151] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[   19.474924] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[   19.492049] hub 1-1:1.0: USB hub found
[   19.492176] hub 1-1:1.0: 4 ports detected
[   19.507945] hub 2-1:1.0: USB hub found
[   19.508094] hub 2-1:1.0: 4 ports detected
[   19.520068] cryptd: max_cpu_qlen set to 1000
[   19.618087] acer_wmi: Acer Laptop ACPI-WMI Extras
[   19.618144] acer_wmi: Function bitmap for Communication Button: 0x801
[   19.652908] input: Acer WMI hotkeys as /devices/virtual/input/input9
[   19.750561] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   19.751282] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.751321] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   19.751790] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   19.753681] snd_hda_intel 0000:00:01.1: Codec #0 successfully probed, retry count = 0
[   19.755782] snd_hda_intel 0000:00:14.2: Codec #0 successfully probed, retry count = 0
[   19.780490] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[   19.792983] AVX version of gcm_enc/dec engaged.
[   19.793045] AES CTR mode by8 optimization enabled
[   19.795557] r8169 0000:01:00.0 enp1s0: renamed from eth0
[   19.798436] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[   19.843463] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[   19.879472] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d5f03)
[   19.891665] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x16, 0x10.
[   19.905990] psmouse serio1: elantech: Elan sample query result 00, 25, 75
[   19.970720] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[   19.989543] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[   20.103988] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.104011] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.104021] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   20.104030] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   20.104036] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   20.104042] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1b
[   20.144100] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   20.144203] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   20.430653] SVM: TSC scaling supported
[   20.430661] kvm: Nested Virtualization enabled
[   20.430663] SVM: kvm: Nested Paging enabled
[   20.430672] SVM: LBR virtualization supported
[   20.607477] EDAC MC: Ver: 3.0.0
[   20.616633] MCE: In-kernel MCE decoding enabled.
[   20.677557] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   20.711042] Adding 10580988k swap on /dev/sda2.  Priority:-2 extents:1 across:10580988k FS
[   21.010926] mc: Linux media interface: v0.10
[   21.041265] usbcore: registered new interface driver rtsx_usb
[   21.069825] videodev: Linux video capture interface: v2.00
[   21.101225] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
[   21.101249] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 1
[   21.102876] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[   21.207804] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[   21.242034] Bluetooth: Core ver 2.22
[   21.242102] NET: Registered PF_BLUETOOTH protocol family
[   21.242104] Bluetooth: HCI device and connection manager initialized
[   21.242113] Bluetooth: HCI socket layer initialized
[   21.242117] Bluetooth: L2CAP socket layer initialized
[   21.242124] Bluetooth: SCO socket layer initialized
[   21.284868] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   21.347759] ath: EEPROM regdomain: 0x69
[   21.347770] ath: EEPROM indicates we should expect a direct regpair map
[   21.347772] ath: Country alpha2 being used: 00
[   21.347775] ath: Regpair used: 0x69
[   21.392702] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[   21.393097] usb 2-1.1: Found UVC 1.00 device VGA Webcam (04f2:b47f)
[   21.402773] input: VGA Webcam: VGA Webcam as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input13
[   21.402912] usbcore: registered new interface driver uvcvideo
[   21.410726] usbcore: registered new interface driver btusb
[   21.461604] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[   21.461615] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[   21.879557] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[   21.904078] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[   21.932376] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   22.873854] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[   28.956538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.956545] Bluetooth: BNEP filters: protocol multicast
[   28.956554] Bluetooth: BNEP socket layer initialized
[   28.958418] Bluetooth: MGMT ver 1.22
[   28.985075] NET: Registered PF_ALG protocol family
[   31.236597] NET: Registered PF_QIPCRTR protocol family
[   31.517476] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[   31.626667] r8169 0000:01:00.0 enp1s0: Link is Down
[   32.688828] NET: Registered PF_PACKET protocol family
[   52.037731] systemd-journald[746]: File /var/log/journal/d62c46bcd402e67b99e1aaed668dacc8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   70.866594] Bluetooth: RFCOMM TTY layer initialized
[   70.866629] Bluetooth: RFCOMM socket layer initialized
[   70.866642] Bluetooth: RFCOMM ver 1.11
[  244.237423] acer_wmi: Unknown function number - 4 - 0
[  244.903509] acer_wmi: Unknown function number - 4 - 0
[  245.422526] acer_wmi: Unknown function number - 4 - 0
[  250.349934] acer_wmi: Unknown function number - 4 - 0
[  258.184339] acer_wmi: Unknown function number - 4 - 0
[  499.887025] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  499.917806] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  499.980469] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  499.980489] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  500.007602] wlp2s0: authenticated
[  500.009437] wlp2s0: associate with 1c:61:b4:34:2d:01 (try 1/3)
[  500.012815] wlp2s0: RX AssocResp from 1c:61:b4:34:2d:01 (capab=0x511 status=0 aid=18)
[  500.015529] wlp2s0: associated
[  500.015739] ath: EEPROM regdomain: 0x8114
[  500.015744] ath: EEPROM indicates we should expect a country code
[  500.015747] ath: doing EEPROM country->regdmn map search
[  500.015749] ath: country maps to regdmn code: 0x37
[  500.015751] ath: Country alpha2 being used: DE
[  500.015753] ath: Regpair used: 0x37
[  500.015759] ath: regdomain 0x8114 dynamically updated by country element
[  500.090748] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 1c:61:b4:34:2d:01
[  500.105630] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  507.232741] systemd-journald[746]: Time jumped backwards, rotating.
[  768.197683] mmc1: new ultra high speed SDR50 SDXC card at address 59b4
[  768.246994] mmcblk1: mmc1:59b4 USDU1 58.9 GiB 
[  768.250103]  mmcblk1: p1 p2
[  773.933549] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  773.947338] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  779.954973] EXT4-fs (mmcblk1p2): recovery complete
[  779.954995] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
[  784.829881] mmc1: card 59b4 removed
[  784.838568] JBD2: I/O error when updating journal superblock for mmcblk1p2-8.
[  784.838577] Aborting journal on device mmcblk1p2-8.
[  784.838594] JBD2: I/O error when updating journal superblock for mmcblk1p2-8.
[  784.929943] EXT4-fs (mmcblk1p2): unmounting filesystem.
[  817.934325] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[  818.229393] usb 1-1.2: Found UVC 1.00 device HP Webcam HD 2300 (03f0:e207)
[  818.248717] input: HP Webcam HD 2300: HP Webcam HD as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14
[  818.386579] hid: raw HID events driver (C) Jiri Kosina
[  818.407279] usbcore: registered new interface driver usbhid
[  818.407289] usbhid: USB HID core driver
[  818.465955] usbcore: registered new interface driver snd-usb-audio
[  818.513482] hid-generic 0003:03F0:E207.0001: hiddev96,hidraw0: USB HID v1.11 Device [Hewlett Packard HP Webcam HD 2300] on usb-0000:00:12.0-1.2/input4
[  828.051782] usb 1-1.2: USB disconnect, device number 4
[  872.746682] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[  872.961357] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[  872.961712] scsi host2: usb-storage 1-1.2:1.0
[  872.961888] usbcore: registered new interface driver usb-storage
[  872.967188] usbcore: registered new interface driver uas
[  873.969059] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.01 PQ: 0 ANSI: 4
[  873.972896] sd 2:0:0:0: [sdb] 15656948 512-byte logical blocks: (8.02 GB/7.46 GiB)
[  873.974003] sd 2:0:0:0: [sdb] Write Protect is off
[  873.974009] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  873.975146] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  874.001147] GPT:Primary header thinks Alt. header is not at the end of the disk.
[  874.001155] GPT:14321863 != 15656947
[  874.001158] GPT:Alternate GPT header not at the end of the disk.
[  874.001159] GPT:14321863 != 15656947
[  874.001161] GPT: Use GNU Parted to correct GPT errors.
[  874.001171]  sdb: sdb1 sdb2 sdb3
[  874.001540] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  882.644104] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[  882.776902] GPT:Primary header thinks Alt. header is not at the end of the disk.
[  882.776926] GPT:14321863 != 15656947
[  882.776932] GPT:Alternate GPT header not at the end of the disk.
[  882.776934] GPT:14321863 != 15656947
[  882.776937] GPT: Use GNU Parted to correct GPT errors.
[  882.776961]  sdb: sdb1 sdb2 sdb3
[  883.456641] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[  883.456663] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[  883.456671] I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[  883.456844] usb 1-1.2: USB disconnect, device number 5
[  883.460079] device offline error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  883.460103] Buffer I/O error on dev sdb, logical block 512, async page read
[  883.460126] device offline error, dev sdb, sector 2052 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  883.460134] Buffer I/O error on dev sdb, logical block 513, async page read
[  923.970531] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx
[  923.970580] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[  979.618861] wlp2s0: deauthenticating from 1c:61:b4:34:2d:01 by local choice (Reason: 3=DEAUTH_LEAVING)
[  979.694839] ath10k_pci 0000:02:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[  995.707655] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  995.738229] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  995.790983] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[  995.791004] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[  995.814892] wlp2s0: authenticated
[  995.816230] wlp2s0: associate with 1c:61:b4:34:2d:01 (try 1/3)
[  995.818644] wlp2s0: RX AssocResp from 1c:61:b4:34:2d:01 (capab=0x511 status=0 aid=13)
[  995.820849] wlp2s0: associated
[  995.821022] ath: EEPROM regdomain: 0x8114
[  995.821026] ath: EEPROM indicates we should expect a country code
[  995.821028] ath: doing EEPROM country->regdmn map search
[  995.821030] ath: country maps to regdmn code: 0x37
[  995.821032] ath: Country alpha2 being used: DE
[  995.821034] ath: Regpair used: 0x37
[  995.821038] ath: regdomain 0x8114 dynamically updated by country element
[  995.843952] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  995.883656] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 1c:61:b4:34:2d:01
[ 1005.096708] r8169 0000:01:00.0 enp1s0: Link is Down
[ 1014.080312] wlp2s0: deauthenticating from 1c:61:b4:34:2d:01 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1014.160375] ath10k_pci 0000:02:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 1034.203361] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[ 1034.234577] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[ 1034.292770] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[ 1034.292794] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[ 1034.318362] wlp2s0: authenticated
[ 1034.319560] wlp2s0: associate with 1c:61:b4:34:2d:01 (try 1/3)
[ 1034.322226] wlp2s0: RX AssocResp from 1c:61:b4:34:2d:01 (capab=0x511 status=0 aid=9)
[ 1034.325223] wlp2s0: associated
[ 1034.325425] ath: EEPROM regdomain: 0x8114
[ 1034.325430] ath: EEPROM indicates we should expect a country code
[ 1034.325432] ath: doing EEPROM country->regdmn map search
[ 1034.325435] ath: country maps to regdmn code: 0x37
[ 1034.325438] ath: Country alpha2 being used: DE
[ 1034.325440] ath: Regpair used: 0x37
[ 1034.325447] ath: regdomain 0x8114 dynamically updated by country element
[ 1034.360759] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1034.386248] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 1c:61:b4:34:2d:01
[ 1083.074163] wlp2s0: deauthenticating from 1c:61:b4:34:2d:01 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1083.114182] ath10k_pci 0000:02:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 1083.833341] PM: suspend entry (deep)
[ 1084.399431] Filesystems sync: 0.566 seconds
[ 1084.497901] Freezing user space processes
[ 1084.500275] Freezing user space processes completed (elapsed 0.002 seconds)
[ 1084.500293] OOM killer disabled.
[ 1084.500295] Freezing remaining freezable tasks
[ 1084.501637] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 1084.501673] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1084.624988] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1084.625215] ata1.00: Entering standby power mode
[ 1085.253590] ACPI: EC: interrupt blocked
[ 1085.265863] ccp 0000:00:08.0: Refused to change power state from D0 to D3hot
[ 1085.279236] ACPI: PM: Preparing to enter system sleep state S3
[ 1085.284759] ACPI: EC: event blocked
[ 1085.284767] ACPI: EC: EC stopped
[ 1085.284769] ACPI: PM: Saving platform NVS memory
[ 1085.284872] Disabling non-boot CPUs ...
[ 1085.287101] smpboot: CPU 1 is now offline
[ 1085.290204] smpboot: CPU 2 is now offline
[ 1085.293139] smpboot: CPU 3 is now offline
[ 1085.294123] ACPI: PM: Low-level resume complete
[ 1085.294149] ACPI: EC: EC started
[ 1085.294150] ACPI: PM: Restoring platform NVS memory
[ 1085.294190] LVT offset 0 assigned for vector 0x400
[ 1085.294948] Enabling non-boot CPUs ...
[ 1085.295417] x86: Booting SMP configuration:
[ 1085.295423] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1085.295885] microcode: CPU1: patch_level=0x07030105
[ 1085.298347] ACPI: \_PR_.C001: Found 2 idle states
[ 1085.298943] CPU1 is up
[ 1085.299395] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1085.299878] microcode: CPU2: patch_level=0x07030105
[ 1085.302317] ACPI: \_PR_.C002: Found 2 idle states
[ 1085.302962] CPU2 is up
[ 1085.303414] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1085.303911] microcode: CPU3: patch_level=0x07030105
[ 1085.306380] ACPI: \_PR_.C003: Found 2 idle states
[ 1085.307114] CPU3 is up
[ 1085.307894] ACPI: PM: Waking up from system sleep state S3
[ 1085.312926] ACPI: EC: interrupt unblocked
[ 1085.314808] ACPI: EC: event unblocked
[ 1085.378845] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 1085.379008] radeon 0000:00:01.0: WB enabled
[ 1085.379025] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 1085.379030] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 1085.379033] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 1085.379037] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 1085.379040] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 1085.379643] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 1085.379855] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 1085.379859] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 1085.380283] debugfs: File 'radeon_ring_gfx' in directory '0' already present!
[ 1085.380289] debugfs: File 'radeon_ring_cp1' in directory '0' already present!
[ 1085.380292] debugfs: File 'radeon_ring_cp2' in directory '0' already present!
[ 1085.380295] debugfs: File 'radeon_ring_dma1' in directory '0' already present!
[ 1085.380299] debugfs: File 'radeon_ring_dma2' in directory '0' already present!
[ 1085.382143] [drm] ring test on 0 succeeded in 3 usecs
[ 1085.382211] [drm] ring test on 1 succeeded in 2 usecs
[ 1085.382223] [drm] ring test on 2 succeeded in 2 usecs
[ 1085.382423] [drm] ring test on 3 succeeded in 4 usecs
[ 1085.382431] [drm] ring test on 4 succeeded in 3 usecs
[ 1085.382434] debugfs: File 'radeon_ring_uvd' in directory '0' already present!
[ 1085.408470] [drm] ring test on 5 succeeded in 1 usecs
[ 1085.408486] [drm] UVD initialized successfully.
[ 1085.408488] debugfs: File 'radeon_ring_vce1' in directory '0' already present!
[ 1085.408492] debugfs: File 'radeon_ring_vce2' in directory '0' already present!
[ 1085.518531] [drm] ring test on 6 succeeded in 7 usecs
[ 1085.518540] [drm] ring test on 7 succeeded in 2 usecs
[ 1085.518542] [drm] VCE initialized successfully.
[ 1085.518694] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1085.518838] [drm] ib test on ring 1 succeeded in 0 usecs
[ 1085.518977] [drm] ib test on ring 2 succeeded in 0 usecs
[ 1085.519119] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1085.519259] [drm] ib test on ring 4 succeeded in 0 usecs
[ 1085.631736] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1085.633862] ata2.00: configured for UDMA/133
[ 1086.023676] [drm] ib test on ring 5 succeeded
[ 1086.024407] [drm] ib test on ring 6 succeeded
[ 1086.024867] [drm] ib test on ring 7 succeeded
[ 1087.607776] usb 2-1.2: reset full-speed USB device number 4 using ehci-pci
[ 1087.607786] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[ 1087.775558] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 1087.892069] OOM killer enabled.
[ 1087.892075] Restarting tasks ... 
[ 1087.892601] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 1087.892609] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 1087.906694] done.
[ 1087.906711] random: crng reseeded on system resumption
[ 1087.906767] PM: suspend exit
[ 1088.259558] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 1088.284020] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 1088.295569] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1088.295586] ata1.00: Entering active power mode
[ 1088.342249] ata1.00: configured for UDMA/100
[ 1088.398846] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[ 1088.531713] Bluetooth: MGMT ver 1.22
[ 1088.567710] r8169 0000:01:00.0 enp1s0: Link is Down
[ 1093.268905] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[ 1093.301826] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[ 1093.357535] wlp2s0: authenticate with 1c:61:b4:34:2d:01
[ 1093.357555] wlp2s0: send auth to 1c:61:b4:34:2d:01 (try 1/3)
[ 1093.383683] wlp2s0: authenticated
[ 1093.384536] wlp2s0: associate with 1c:61:b4:34:2d:01 (try 1/3)
[ 1093.387760] wlp2s0: RX AssocResp from 1c:61:b4:34:2d:01 (capab=0x511 status=0 aid=9)
[ 1093.390114] wlp2s0: associated
[ 1093.390298] ath: EEPROM regdomain: 0x8114
[ 1093.390303] ath: EEPROM indicates we should expect a country code
[ 1093.390305] ath: doing EEPROM country->regdmn map search
[ 1093.390307] ath: country maps to regdmn code: 0x37
[ 1093.390310] ath: Country alpha2 being used: DE
[ 1093.390312] ath: Regpair used: 0x37
[ 1093.390319] ath: regdomain 0x8114 dynamically updated by country element
[ 1093.424839] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1093.461428] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 1c:61:b4:34:2d:01
[ 1135.016498] ath10k_pci 0000:02:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 1135.471017] wlp2s0: authenticate with f0:a7:31:50:95:d9
[ 1135.501375] wlp2s0: send auth to f0:a7:31:50:95:d9 (try 1/3)
[ 1135.616360] wlp2s0: authenticate with f0:a7:31:50:95:d9
[ 1135.616384] wlp2s0: send auth to f0:a7:31:50:95:d9 (try 1/3)
[ 1135.713955] wlp2s0: authenticated
[ 1135.715331] wlp2s0: associate with f0:a7:31:50:95:d9 (try 1/3)
[ 1135.754501] wlp2s0: RX AssocResp from f0:a7:31:50:95:d9 (capab=0x931 status=0 aid=33)
[ 1135.756868] wlp2s0: associated
[ 1387.841569] systemd-sysv-generator[6302]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1387.860657] systemd-sysv-generator[6302]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1388.569044] systemd-sysv-generator[6361]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1388.587490] systemd-sysv-generator[6361]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1392.088712] systemd-sysv-generator[6426]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1392.107758] systemd-sysv-generator[6426]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1392.736799] systemd-sysv-generator[6485]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1392.757880] systemd-sysv-generator[6485]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1462.560836] systemd-sysv-generator[22483]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1462.579652] systemd-sysv-generator[22483]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1463.301630] systemd-sysv-generator[22551]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
[ 1463.320788] systemd-sysv-generator[22551]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
