[    0.000000] Linux version 2.6.27-ovz-smp-alt8 (builder@apiary.orion.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt13) (GCC) ) #1 SMP Wed Jul 22 14:38:58 UTC 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003def0000 (usable)
[    0.000000]  BIOS-e820: 000000003def0000 - 000000003def3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003def3000 - 000000003df00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003e000000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x3def0 max_arch_pfn = 0x100000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[    0.000000] RAMDISK: 3da14000 - 3dece600
[    0.000000] Allocated new RAMDISK: 006ad000 - 00b67600
[    0.000000] Move RAMDISK from 000000003da14000 - 000000003dece5ff to 006ad000 - 00b675ff
[    0.000000] ACPI: RSDP 000F75E0, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 3DEF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3DEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3DEF3180, 7FF6 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 3DEF0000, 0040
[    0.000000] ACPI: SSDT 3DEFB280, 0206 (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: MCFG 3DEFB500, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 3DEFB1C0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] 94MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00011000 - 00018000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000200000 - 00006a9da0]    TEXT DATA BSS ==> [0000200000 - 00006a9da0]
[    0.000000]   #4 [00006aa000 - 00006ad000]    INIT_PG_TABLE ==> [00006aa000 - 00006ad000]
[    0.000000]   #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00006ad000 - 0000b67600]      NEW RAMDISK ==> [00006ad000 - 0000b67600]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f5b20] 000f5b20
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x0003def0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003def0
[    0.000000] On node 0 totalpages: 253567
[    0.000000] free_area_init_node: node 0, pgdat c0576d80, node_mem_map c1000240
[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 24090 pages, LIFO batch:3
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[    0.000000] PERCPU: Allocating 40220 bytes of per cpu data
[    0.000000] NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251337
[    0.000000] Kernel command line: initrd=alt0/full.cz changedisk ramdisk_size=65536 lang=ru_RU vga=0x314 splash=silent splashcount=17 xdriver=auto showopts BOOT_IMAGE=alt0/vmlinuz vga=0x314 lang=ru_RU automatic=method:cdrom
[    0.000000] bootsplash: silent mode.
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 2204.545 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour dummy device 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 994564k/1014720k available (2414k kernel code, 19472k reserved, 1226k data, 396k init, 97216k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc0597000 - 0xc05fa000   ( 396 kB)
[    0.004000]       .data : 0xc045b82a - 0xc058e380   (1226 kB)
[    0.004000]       .text : 0xc0200000 - 0xc045b82a   (2414 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4409.09 BogoMIPS (lpj=8818180)
[    0.012077] Mount-cache hash table entries: 512
[    0.012453] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.012460] CPU: L2 Cache: 512K (64 bytes/line)
[    0.012465] CPU 0(2) -> Core 0
[    0.012470] Intel machine check architecture supported.
[    0.012476] Intel machine check reporting enabled on CPU#0.
[    0.012482] using C1E aware idle routine
[    0.012502] Checking 'hlt' instruction... OK.
[    0.028334] ACPI: Core revision 20080609
[    0.030607] ACPI: Checking initramfs for custom DSDT
[    0.286761] Page beancounter hash is 65536 entries.
[    0.287945] ENABLING IO-APIC IRQs
[    0.288018] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.292018] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.292018] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.292018] ..... (found apic 0 pin 0) ...
[    0.300018] ....... failed.
[    0.300018] ...trying to set up timer as Virtual Wire IRQ...
[    0.300018] ..... failed.
[    0.300018] ...trying to set up timer as ExtINT IRQ...
[    0.342399] ..... works.
[    0.342403] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[    0.344021] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.396024] Calibrating delay using timer specific routine.. 4409.52 BogoMIPS (lpj=8819048)
[    0.396024] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.396024] CPU: L2 Cache: 512K (64 bytes/line)
[    0.396024] CPU 1(2) -> Core 1
[    0.396024] Intel machine check architecture supported.
[    0.396024] Intel machine check reporting enabled on CPU#1.
[    0.396024] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.428734] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[    0.428775] Brought up 2 CPUs
[    0.428780] Total of 2 processors activated (8818.61 BogoMIPS).
[    0.428845] CPU0 attaching sched-domain:
[    0.428849]  domain 0: span 0-1 level CPU
[    0.428853]   groups: 0 1
[    0.428861] CPU1 attaching sched-domain:
[    0.428865]  domain 0: span 0-1 level CPU
[    0.428868]   groups: 1 0
[    0.429003] net_namespace: 648 bytes
[    0.429003] NET: Registered protocol family 16
[    0.429003] EISA bus registered
[    0.429003] ACPI: bus type pci registered
[    0.429003] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.429003] PCI: MCFG area at f0000000 reserved in E820
[    0.429003] PCI: Using MMCONFIG for extended config space
[    0.429003] PCI: Using configuration type 1 for base access
[    0.436088] ACPI: EC: Look up EC in DSDT
[    0.474709] ACPI: Interpreter enabled
[    0.474721] ACPI: (supports S0 S1 S3 S4 S5)
[    0.474837] ACPI: Using IOAPIC for interrupt routing
[    0.513082] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.513082] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.513082] pci 0000:00:02.0: PME# disabled
[    0.513082] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.513082] pci 0000:00:03.0: PME# disabled
[    0.513082] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.513082] pci 0000:00:04.0: PME# disabled
[    0.513082] PCI: 0000:00:05.0 reg 10 32bit mmio: [fc000000, fcffffff]
[    0.513082] PCI: 0000:00:05.0 reg 14 64bit mmio: [e0000000, efffffff]
[    0.513082] PCI: 0000:00:05.0 reg 1c 64bit mmio: [fb000000, fbffffff]
[    0.513082] PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff]
[    0.516248] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.516296] PCI: 0000:00:0a.1 reg 20 io port: [4c00, 4c3f]
[    0.516303] PCI: 0000:00:0a.1 reg 24 io port: [4c40, 4c7f]
[    0.516332] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[    0.516342] pci 0000:00:0a.1: PME# disabled
[    0.516407] PCI: 0000:00:0b.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
[    0.516438] pci 0000:00:0b.0: supports D1
[    0.516440] pci 0000:00:0b.0: supports D2
[    0.516443] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.516451] pci 0000:00:0b.0: PME# disabled
[    0.516478] PCI: 0000:00:0b.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
[    0.516511] pci 0000:00:0b.1: supports D1
[    0.516514] pci 0000:00:0b.1: supports D2
[    0.516517] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.516524] pci 0000:00:0b.1: PME# disabled
[    0.516561] PCI: 0000:00:0d.0 reg 20 io port: [f400, f40f]
[    0.516605] PCI: 0000:00:0e.0 reg 10 io port: [9f0, 9f7]
[    0.516610] PCI: 0000:00:0e.0 reg 14 io port: [bf0, bf3]
[    0.516616] PCI: 0000:00:0e.0 reg 18 io port: [970, 977]
[    0.516621] PCI: 0000:00:0e.0 reg 1c io port: [b70, b73]
[    0.516627] PCI: 0000:00:0e.0 reg 20 io port: [e000, e00f]
[    0.516632] PCI: 0000:00:0e.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
[    0.516681] PCI: 0000:00:0f.0 reg 10 io port: [9e0, 9e7]
[    0.516686] PCI: 0000:00:0f.0 reg 14 io port: [be0, be3]
[    0.516692] PCI: 0000:00:0f.0 reg 18 io port: [960, 967]
[    0.516697] PCI: 0000:00:0f.0 reg 1c io port: [b60, b63]
[    0.516703] PCI: 0000:00:0f.0 reg 20 io port: [cc00, cc0f]
[    0.516709] PCI: 0000:00:0f.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
[    0.516795] PCI: 0000:00:10.1 reg 10 32bit mmio: [fe024000, fe027fff]
[    0.516833] pci 0000:00:10.1: PME# supported from D3hot D3cold
[    0.516840] pci 0000:00:10.1: PME# disabled
[    0.516871] PCI: 0000:00:14.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
[    0.516877] PCI: 0000:00:14.0 reg 14 io port: [c800, c807]
[    0.516901] pci 0000:00:14.0: supports D1
[    0.516904] pci 0000:00:14.0: supports D2
[    0.516907] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.516914] pci 0000:00:14.0: PME# disabled
[    0.517029] PCI: bridge 0000:00:02.0 io port: [a000, afff]
[    0.517034] PCI: bridge 0000:00:02.0 32bit mmio: [fd800000, fd8fffff]
[    0.517039] PCI: bridge 0000:00:02.0 64bit mmio pref: [fd700000, fd7fffff]
[    0.517076] PCI: bridge 0000:00:03.0 io port: [8000, 8fff]
[    0.517080] PCI: bridge 0000:00:03.0 32bit mmio: [fde00000, fdefffff]
[    0.517085] PCI: bridge 0000:00:03.0 64bit mmio pref: [fdd00000, fddfffff]
[    0.517122] PCI: bridge 0000:00:04.0 io port: [b000, bfff]
[    0.517126] PCI: bridge 0000:00:04.0 32bit mmio: [fdc00000, fdcfffff]
[    0.517131] PCI: bridge 0000:00:04.0 64bit mmio pref: [fd900000, fd9fffff]
[    0.517189] PCI: 0000:04:05.0 reg 10 32bit mmio: [fdbff000, fdbff7ff]
[    0.517196] PCI: 0000:04:05.0 reg 14 32bit mmio: [fdbf8000, fdbfbfff]
[    0.517234] pci 0000:04:05.0: supports D1
[    0.517236] pci 0000:04:05.0: supports D2
[    0.517239] pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot
[    0.517247] pci 0000:04:05.0: PME# disabled
[    0.517278] PCI: 0000:04:08.0 reg 10 io port: [9c00, 9cff]
[    0.517285] PCI: 0000:04:08.0 reg 14 32bit mmio: [fdbfe000, fdbfe0ff]
[    0.517306] PCI: 0000:04:08.0 reg 30 32bit mmio: [fdbe0000, fdbeffff]
[    0.517326] pci 0000:04:08.0: supports D1
[    0.517328] pci 0000:04:08.0: supports D2
[    0.517331] pci 0000:04:08.0: PME# supported from D1 D2 D3hot
[    0.517338] pci 0000:04:08.0: PME# disabled
[    0.517363] pci 0000:00:10.0: transparent bridge
[    0.517369] PCI: bridge 0000:00:10.0 io port: [9000, 9fff]
[    0.517374] PCI: bridge 0000:00:10.0 32bit mmio: [fdb00000, fdbfffff]
[    0.517379] PCI: bridge 0000:00:10.0 32bit mmio pref: [fda00000, fdafffff]
[    0.517390] bus 00 -> node 0
[    0.517408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.519988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.876340] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[    0.876790] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.877238] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.877693] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[    0.878143] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.878589] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.879043] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
[    0.879485] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.879940] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.880389] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.880843] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[    0.881285] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.881737] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.882178] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.882622] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.883073] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.883523] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[    0.883963] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.884421] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[    0.884869] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[    0.885613] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.886336] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.887057] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.887778] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.888504] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.889223] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.889942] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.890660] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.891379] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.892103] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.892823] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.893541] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[    0.894258] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.894976] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.895692] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.896416] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.897132] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.897847] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.898563] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.899278] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.900000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.900159] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.900159] pnp: PnP ACPI init
[    0.900159] ACPI: bus type pnp registered
[    0.924375] pnp: PnP ACPI: found 17 devices
[    0.924375] ACPI: ACPI bus type pnp unregistered
[    0.924375] PnPBIOS: Disabled by ACPI PNP
[    0.924375] PCI: Using ACPI for IRQ routing
[    0.932556] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.932563]    actual entries 65620
[    0.932951] ACPI: RTC can wake from S4
[    0.940080] system 00:01: ioport range 0x4000-0x407f has been reserved
[    0.940088] system 00:01: ioport range 0x4080-0x40ff has been reserved
[    0.940096] system 00:01: ioport range 0x4400-0x447f has been reserved
[    0.940104] system 00:01: ioport range 0x4480-0x44ff has been reserved
[    0.940112] system 00:01: ioport range 0x4800-0x487f has been reserved
[    0.940119] system 00:01: ioport range 0x4880-0x48ff has been reserved
[    0.940127] system 00:01: ioport range 0x2000-0x207f has been reserved
[    0.940135] system 00:01: ioport range 0x2080-0x20ff has been reserved
[    0.940146] system 00:01: iomem range 0x3e000000-0x3fffffff could not be reserved
[    0.940161] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.940169] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.940177] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.940199] system 00:0f: iomem range 0xf0000000-0xf3ffffff could not be reserved
[    0.940220] system 00:10: iomem range 0xd5800-0xd7fff has been reserved
[    0.940229] system 00:10: iomem range 0xf0000-0xf7fff could not be reserved
[    0.940239] system 00:10: iomem range 0xf8000-0xfbfff could not be reserved
[    0.940249] system 00:10: iomem range 0xfc000-0xfffff could not be reserved
[    0.940258] system 00:10: iomem range 0x3def0000-0x3defffff could not be reserved
[    0.940270] system 00:10: iomem range 0xffff0000-0xffffffff could not be reserved
[    0.940281] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.940290] system 00:10: iomem range 0x100000-0x3deeffff could not be reserved
[    0.940301] system 00:10: iomem range 0x3df00000-0x3fefffff could not be reserved
[    0.940313] system 00:10: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.940325] system 00:10: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.940336] system 00:10: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.940347] system 00:10: iomem range 0xfff80000-0xfff80fff could not be reserved
[    0.940359] system 00:10: iomem range 0xfff90000-0xfffbffff could not be reserved
[    0.940371] system 00:10: iomem range 0xfffed000-0xfffeffff could not be reserved
[    0.976516] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    0.976524] pci 0000:00:02.0:   IO window: 0xa000-0xafff
[    0.976531] pci 0000:00:02.0:   MEM window: 0xfd800000-0xfd8fffff
[    0.976538] pci 0000:00:02.0:   PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[    0.976547] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[    0.976553] pci 0000:00:03.0:   IO window: 0x8000-0x8fff
[    0.976560] pci 0000:00:03.0:   MEM window: 0xfde00000-0xfdefffff
[    0.976566] pci 0000:00:03.0:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[    0.976575] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[    0.976581] pci 0000:00:04.0:   IO window: 0xb000-0xbfff
[    0.976587] pci 0000:00:04.0:   MEM window: 0xfdc00000-0xfdcfffff
[    0.976594] pci 0000:00:04.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[    0.976605] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[    0.976611] pci 0000:00:10.0:   IO window: 0x9000-0x9fff
[    0.976618] pci 0000:00:10.0:   MEM window: 0xfdb00000-0xfdbfffff
[    0.976625] pci 0000:00:10.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
[    0.976640] pci 0000:00:02.0: setting latency timer to 64
[    0.976646] pci 0000:00:03.0: setting latency timer to 64
[    0.976652] pci 0000:00:04.0: setting latency timer to 64
[    0.976657] pci 0000:00:10.0: setting latency timer to 64
[    0.976662] bus: 00 index 0 io port: [0, ffff]
[    0.976667] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.976672] bus: 01 index 0 io port: [a000, afff]
[    0.976678] bus: 01 index 1 mmio: [fd800000, fd8fffff]
[    0.976683] bus: 01 index 2 mmio: [fd700000, fd7fffff]
[    0.976688] bus: 01 index 3 mmio: [0, 0]
[    0.976693] bus: 02 index 0 io port: [8000, 8fff]
[    0.976698] bus: 02 index 1 mmio: [fde00000, fdefffff]
[    0.976704] bus: 02 index 2 mmio: [fdd00000, fddfffff]
[    0.976709] bus: 02 index 3 mmio: [0, 0]
[    0.976714] bus: 03 index 0 io port: [b000, bfff]
[    0.976719] bus: 03 index 1 mmio: [fdc00000, fdcfffff]
[    0.976724] bus: 03 index 2 mmio: [fd900000, fd9fffff]
[    0.976730] bus: 03 index 3 mmio: [0, 0]
[    0.976734] bus: 04 index 0 io port: [9000, 9fff]
[    0.976740] bus: 04 index 1 mmio: [fdb00000, fdbfffff]
[    0.976745] bus: 04 index 2 mmio: [fda00000, fdafffff]
[    0.976750] bus: 04 index 3 io port: [0, ffff]
[    0.976755] bus: 04 index 4 mmio: [0, ffffffffffffffff]
[    0.976770] NET: Registered protocol family 2
[    0.980048] Switched to high resolution mode on CPU 0
[    0.980795] Switched to high resolution mode on CPU 1
[    0.992111] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.992482] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.993127] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.993476] TCP: Hash tables configured (established 131072 bind 65536)
[    0.993484] TCP reno registered
[    1.000182] NET: Registered protocol family 1
[    1.000769] checking if image is initramfs... it is
[    1.488587] Freeing initrd memory: 4841k freed
[    1.492080] audit: initializing netlink socket (disabled)
[    1.492134] type=2000 audit(1250151631.488:1): initialized
[    1.497424] highmem bounce pool size: 64 pages
[    1.497439] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.512547] VFS: Disk quotas dquot_6.5.1
[    1.512744] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.513153] msgmni has been set to 1762
[    1.513665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    1.513674] io scheduler noop registered
[    1.513983] io scheduler cfq registered (default)
[    1.514014] pci 0000:00:00.0: Enabling HT MSI Mapping
[    1.514090] pci 0000:00:02.0: Enabling HT MSI Mapping
[    1.514107] pci 0000:00:03.0: Enabling HT MSI Mapping
[    1.514124] pci 0000:00:04.0: Enabling HT MSI Mapping
[    1.514140] pci 0000:00:05.0: Boot video device
[    1.514167] pci 0000:00:09.0: Enabling HT MSI Mapping
[    1.529084] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    1.529104] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    1.529121] pci 0000:00:10.0: Enabling HT MSI Mapping
[    1.529141] pci 0000:00:10.1: Enabling HT MSI Mapping
[    1.529550] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    1.529572] pcieport-driver 0000:00:02.0: found MSI capability
[    1.529596] pci_express 0000:00:02.0:pcie00: allocate port service
[    1.529735] pci_express 0000:00:02.0:pcie03: allocate port service
[    1.529893] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    1.529914] pcieport-driver 0000:00:03.0: found MSI capability
[    1.529934] pci_express 0000:00:03.0:pcie00: allocate port service
[    1.530068] pci_express 0000:00:03.0:pcie03: allocate port service
[    1.530224] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    1.530256] pcieport-driver 0000:00:04.0: found MSI capability
[    1.530276] pci_express 0000:00:04.0:pcie00: allocate port service
[    1.530418] pci_express 0000:00:04.0:pcie03: allocate port service
[    1.531314] vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3750k, total 32768k
[    1.531324] vesafb: mode is 800x600x16, linelength=1600, pages=2
[    1.531330] vesafb: protected mode interface info at c000:d210
[    1.531336] vesafb: pmi: set display start = c00cd246, set palette = c00cd2b0
[    1.531343] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    1.531364] vesafb: scrolling: redraw
[    1.531370] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.531697] bootsplash 3.1.6-2004/03/31: looking for picture...
[    1.539002] bootsplash: silentjpeg size 91231 bytes
[    1.552827] bootsplash: ...found (800x600, 3865 bytes, v3).
[    1.590867] Console: switching to colour frame buffer device 97x34
[    1.644983] fb0: VESA VGA frame buffer device
[    1.645514] isapnp: Scanning for PnP cards...
[    1.955315] isapnp: No Plug & Play device found
[    2.046045] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.046594] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.047208] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.048700] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.049782] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.055269] brd: module loaded
[    2.060839] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.067497] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.074280] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.080605] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.087640] mice: PS/2 mouse device common for all mice
[    2.094605] EISA: Probing bus 0 at eisa.0
[    2.101407] cpuidle: using governor ladder
[    2.108175] cpuidle: using governor menu
[    2.115549] TCP bic registered
[    2.122225] Using IPI No-Shortcut mode
[    2.129588] registered taskstats version 1
[    2.137074] Freeing unused kernel memory: 396k freed
[    2.143996] Write protecting the kernel text: 2416k
[    2.150772] Write protecting the kernel read-only data: 1016k
[    2.157875] Executing init=/init
[    2.169476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.545249] Uniform Multi-Platform E-IDE driver
[    2.591513] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    2.591595] usbcore: registered new interface driver usbfs
[    2.591689] usbcore: registered new interface driver hub
[    2.592855] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    2.592872] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    2.592881] forcedeth 0000:00:14.0: setting latency timer to 64
[    2.592925] nv_probe: set workaround bit for reversed mac addr
[    2.597692] usbcore: registered new device driver usb
[    2.604432] No dock devices found.
[    2.608466] 8139too Fast Ethernet driver 0.9.28
[    2.621718] SCSI subsystem initialized
[    2.624076] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.648363] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.648422] libata version 3.00 loaded.
[    3.116606] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:65:1e:36
[    3.116617] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
[    3.118746] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    3.118764] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[    3.118787] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[    3.118791] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    3.118901] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[    3.118941] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfe02f000
[    3.175267] usb usb1: configuration #1 chosen from 1 choice
[    3.175345] hub 1-0:1.0: USB hub found
[    3.175364] hub 1-0:1.0: 8 ports detected
[    3.276358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.276364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.276369] usb usb1: Product: OHCI Host Controller
[    3.276372] usb usb1: Manufacturer: Linux 2.6.27-ovz-smp-alt8 ohci_hcd
[    3.276376] usb usb1: SerialNumber: 0000:00:0b.0
[    3.277748] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    3.277763] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    3.277783] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[    3.277787] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[    3.277851] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[    3.277899] ehci_hcd 0000:00:0b.1: debug port 1
[    3.277904] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[    3.277932] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[    3.288026] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.288253] usb usb2: configuration #1 chosen from 1 choice
[    3.288326] hub 2-0:1.0: USB hub found
[    3.288341] hub 2-0:1.0: 8 ports detected
[    3.393320] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.393326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.393331] usb usb2: Product: EHCI Host Controller
[    3.393334] usb usb2: Manufacturer: Linux 2.6.27-ovz-smp-alt8 ehci_hcd
[    3.393337] usb usb2: SerialNumber: 0000:00:0b.1
[    3.393381] amd74xx 0000:00:0d.0: UDMA133 controller
[    3.393387] amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
[    3.393430] amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
[    3.393438]     ide0: BM-DMA at 0xf400-0xf407
[    3.393447]     ide1: BM-DMA at 0xf408-0xf40f
[    3.393452] Probing IDE interface ide0...
[    4.408127] hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
[    4.464093] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    4.464202] hdb: UDMA/66 mode selected
[    4.464317] Probing IDE interface ide1...
[    5.032101] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.034025] ide1 at 0x170-0x177,0x376 on irq 15
[    5.034308] sata_nv 0000:00:0e.0: version 3.5
[    5.035526] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[    5.035538] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[    5.035543] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    5.035599] sata_nv 0000:00:0e.0: setting latency timer to 64
[    5.035840] scsi0 : sata_nv
[    5.036161] scsi1 : sata_nv
[    5.036731] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[    5.036736] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[    5.916053] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.967682] ata1.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
[    5.967688] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    6.034310] ata1.00: configured for UDMA/133
[    6.912050] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.984380] ata2.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
[    6.984385] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    7.092664] ata2.00: configured for UDMA/133
[    7.092826] scsi 0:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
[    7.093245] scsi 1:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
[    7.094700] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    7.094707] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    7.094712] sata_nv 0000:00:0f.0: Using SWNCQ mode
[    7.094768] sata_nv 0000:00:0f.0: setting latency timer to 64
[    7.095030] scsi2 : sata_nv
[    7.095213] scsi3 : sata_nv
[    7.095674] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[    7.095678] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[    7.826537] ata3: SATA link down (SStatus 0 SControl 300)
[    8.704049] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.751937] ata4.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
[    8.751942] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    8.818567] ata4.00: configured for UDMA/133
[    8.818713] scsi 3:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
[    8.820511] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    8.820523] 8139too 0000:04:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    8.821191] eth1: RealTek RTL8139 at 0xf885a000, 00:e0:4c:a0:37:82, IRQ 16
[    8.821195] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[    8.862393] Driver 'sd' needs updating - please use bus_type methods
[    8.862622] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    8.862661] sd 0:0:0:0: [sda] Write Protect is off
[    8.862667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.862730] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.862833] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    8.862868] sd 0:0:0:0: [sda] Write Protect is off
[    8.862874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.862935] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.862945]  sda:<6>hdb: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[    8.867850] Uniform CD-ROM driver Revision: 3.20
[    8.881133]  sda1 sda2 sda4 < sda5 sda6 >
[    8.914391] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.914532] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[    8.914565] sd 1:0:0:0: [sdb] Write Protect is off
[    8.914569] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.914624] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.914718] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[    8.914747] sd 1:0:0:0: [sdb] Write Protect is off
[    8.914751] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.914802] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.914809]  sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 >
[    8.952119] sd 1:0:0:0: [sdb] Attached SCSI disk
[    8.952254] sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[    8.952285] sd 3:0:0:0: [sdc] Write Protect is off
[    8.952289] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    8.952342] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.952428] sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[    8.952456] sd 3:0:0:0: [sdc] Write Protect is off
[    8.952459] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    8.952510] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.952517]  sdc: sdc1 sdc2 sdc4 < sdc5 sdc6 >
[    9.003453] sd 3:0:0:0: [sdc] Attached SCSI disk
[    9.024176] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.024265] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    9.024349] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    9.540699] ISO 9660 Extensions: Microsoft Joliet Level 3
[    9.585478] ISO 9660 Extensions: RRIP_1991A
[    9.597368] loop: module loaded
[   10.609495] squashfs: version 3.4 (2008/08/26) Phillip Lougher
[   15.740101] aufs 20081208
[   18.155300] udev: starting version 141
[   19.098236] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   19.098250] ohci1394 0000:04:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[   19.148129] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdbff000-fdbff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   19.300590] processor ACPI0007:00: registered as cooling_device0
[   19.300694] processor ACPI0007:01: registered as cooling_device1
[   19.901623] Floppy drive(s): fd0 is 1.44M
[   19.905069] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   19.922366] FDC 0 is a post-1991 82077
[   19.942009] ACPI: Power Button (FF) [PWRF]
[   19.942151] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   19.998750] ACPI: Power Button (CM) [PWRB]
[   20.054899] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   20.060718] thermal LNXTHERM:01: registered as thermal_zone0
[   20.061827] ACPI: Thermal Zone [THRM] (40 C)
[   20.386833] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[   20.386883] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[   20.420372] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000df9c4c]
[   20.449781] fan PNP0C0B:00: registered as cooling_device2
[   20.449796] ACPI: Fan [FAN] (on)
[   20.451271] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[   20.451308] rtc0: alarms up to one year, y3k
[   20.791677] elantech.c: unexpected magic knock result 0x5a, 0x03, 0xc8.
[   20.869541] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   20.889795] IT8716 SuperIO detected.
[   20.890002] parport_pc 00:0a: reported by Plug and Play ACPI
[   20.890034] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   20.993857] ppdev: user-space parallel port driver
[   25.709202] NET: Registered protocol family 17
[   27.678281] Bridge firewalling registered
[   27.680449] device eth0 entered promiscuous mode
[   27.690720] breth0: port 1(eth0) entering learning state
[   27.813780] device eth1 entered promiscuous mode
[   42.688019] breth0: topology change detected, propagating
[   42.688026] breth0: port 1(eth0) entering forwarding state
[  132.812647] device-mapper: uevent: version 1.0.3
[  132.814706] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[  136.813674] md: bind<dm-0>
[  136.814002] md: bind<dm-1>
[  136.814291] md: bind<dm-2>
[  136.970839] xor: automatically using best checksumming function: pIII_sse
[  136.988013]    pIII_sse  :  6769.000 MB/sec
[  136.988016] xor: using function: pIII_sse (6769.000 MB/sec)
[  137.272254] async_tx: api initialized (async)
[  137.612071] raid6: int32x1   1037 MB/s
[  137.680022] raid6: int32x2    918 MB/s
[  137.748019] raid6: int32x4    747 MB/s
[  137.816068] raid6: int32x8    578 MB/s
[  137.884036] raid6: mmxx1     1784 MB/s
[  137.952025] raid6: mmxx2     3305 MB/s
[  138.020015] raid6: sse1x1    1782 MB/s
[  138.088013] raid6: sse1x2    2943 MB/s
[  138.156012] raid6: sse2x1    3099 MB/s
[  138.224026] raid6: sse2x2    3955 MB/s
[  138.224029] raid6: using algorithm sse2x2 (3955 MB/s)
[  138.224034] md: raid6 personality registered for level 6
[  138.224037] md: raid5 personality registered for level 5
[  138.224040] md: raid4 personality registered for level 4
[  138.224676] raid5: device dm-2 operational as raid disk 2
[  138.224681] raid5: device dm-1 operational as raid disk 1
[  138.224685] raid5: device dm-0 operational as raid disk 0
[  138.225630] raid5: allocated 3180kB for md0
[  138.225634] raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
[  138.225638] RAID5 conf printout:
[  138.225640]  --- rd:3 wd:3
[  138.225643]  disk 0, o:1, dev:dm-0
[  138.225645]  disk 1, o:1, dev:dm-1
[  138.225648]  disk 2, o:1, dev:dm-2
[  138.229847] md: bind<dm-3>
[  138.236239] md: bind<dm-4>
[  138.236639] md: bind<dm-5>
[  138.547503] md: raid1 personality registered for level 1
[  138.548211] raid1: raid set md1 active with 3 out of 3 mirrors
[  138.562842] md1: bitmap initialized from disk: read 9/9 pages, set 37 bits
[  138.562848] created bitmap (128 pages) for device md1
[  138.623303] md: bind<dm-6>
[  138.638356] md: bind<dm-7>
[  138.650700] md: bind<dm-8>
[  138.654461] raid5: device dm-8 operational as raid disk 2
[  138.654465] raid5: device dm-7 operational as raid disk 1
[  138.654468] raid5: device dm-6 operational as raid disk 0
[  138.655375] raid5: allocated 3180kB for md2
[  138.655379] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[  138.655383] RAID5 conf printout:
[  138.655385]  --- rd:3 wd:3
[  138.655388]  disk 0, o:1, dev:dm-6
[  138.655390]  disk 1, o:1, dev:dm-7
[  138.655393]  disk 2, o:1, dev:dm-8
[  138.694343] md: bind<dm-9>
[  138.708597] md: bind<dm-10>
[  138.723856] md: bind<dm-11>
[  138.769814] raid5: device dm-11 operational as raid disk 2
[  138.769821] raid5: device dm-10 operational as raid disk 1
[  138.769824] raid5: device dm-9 operational as raid disk 0
[  138.770775] raid5: allocated 3180kB for md3
[  138.770778] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[  138.770783] RAID5 conf printout:
[  138.770785]  --- rd:3 wd:3
[  138.770788]  disk 0, o:1, dev:dm-9
[  138.770790]  disk 1, o:1, dev:dm-10
[  138.770793]  disk 2, o:1, dev:dm-11
[  165.060983] md: md1 stopped.
[  165.061021] md: unbind<dm-5>
[  165.065022] md: export_rdev(dm-5)
[  165.065032] md: unbind<dm-4>
[  165.069020] md: export_rdev(dm-4)
[  165.069028] md: unbind<dm-3>
[  165.073019] md: export_rdev(dm-3)
[  165.075130] md: md0 stopped.
[  165.075158] md: unbind<dm-2>
[  165.076161] md: export_rdev(dm-2)
[  165.076176] md: unbind<dm-1>
[  165.085019] md: export_rdev(dm-1)
[  165.085030] md: unbind<dm-0>
[  165.089458] md: export_rdev(dm-0)
[  165.091614] md: md2 stopped.
[  165.091639] md: unbind<dm-8>
[  165.092603] md: export_rdev(dm-8)
[  165.092673] md: unbind<dm-7>
[  165.101025] md: export_rdev(dm-7)
[  165.101085] md: unbind<dm-6>
[  165.105025] md: export_rdev(dm-6)
[  165.107137] md: md3 stopped.
[  165.107171] md: unbind<dm-11>
[  165.108085] md: export_rdev(dm-11)
[  165.108199] md: unbind<dm-10>
[  165.117029] md: export_rdev(dm-10)
[  165.117116] md: unbind<dm-9>
[  165.121029] md: export_rdev(dm-9)
[  165.594185] md: bind<dm-0>
[  165.635544] md: bind<dm-1>
[  165.654468] md: bind<dm-2>
[  165.654667] md: md0: raid array is not clean -- starting background reconstruction
[  165.658872] raid5: device dm-2 operational as raid disk 2
[  165.658877] raid5: device dm-1 operational as raid disk 1
[  165.658881] raid5: device dm-0 operational as raid disk 0
[  165.660069] raid5: allocated 3180kB for md0
[  165.660073] raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
[  165.660078] RAID5 conf printout:
[  165.660080]  --- rd:3 wd:3
[  165.660082]  disk 0, o:1, dev:dm-0
[  165.660085]  disk 1, o:1, dev:dm-1
[  165.660088]  disk 2, o:1, dev:dm-2
[  165.660822] md: resync of RAID array md0
[  165.660827] md: minimum _guaranteed_  speed: 12 KB/sec/disk.
[  165.660831] md: using maximum available idle IO bandwidth (but not more than 12 KB/sec) for resync.
[  165.660838] md: using 128k window, over a total of 995904 blocks.
[  165.677391] md: bind<dm-3>
[  165.699776] md: bind<dm-4>
[  165.719072] md: bind<dm-5>
[  165.719273] md: md1: raid array is not clean -- starting background reconstruction
[  165.722506] raid1: raid set md1 active with 3 out of 3 mirrors
[  165.777036] md: resync of RAID array md1
[  165.777042] md: minimum _guaranteed_  speed: 12 KB/sec/disk.
[  165.777046] md: using maximum available idle IO bandwidth (but not more than 12 KB/sec) for resync.
[  165.777053] md: using 128k window, over a total of 4192896 blocks.
[  165.778500] md: bind<dm-6>
[  165.793759] md: bind<dm-7>
[  165.814394] md: bind<dm-8>
[  165.814607] md: md2: raid array is not clean -- starting background reconstruction
[  165.818375] raid5: device dm-8 operational as raid disk 2
[  165.818380] raid5: device dm-7 operational as raid disk 1
[  165.818384] raid5: device dm-6 operational as raid disk 0
[  165.819293] raid5: allocated 3180kB for md2
[  165.819296] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[  165.819300] RAID5 conf printout:
[  165.819303]  --- rd:3 wd:3
[  165.819305]  disk 0, o:1, dev:dm-6
[  165.819308]  disk 1, o:1, dev:dm-7
[  165.819311]  disk 2, o:1, dev:dm-8
[  165.842455] md: resync of RAID array md2
[  165.842461] md: minimum _guaranteed_  speed: 12 KB/sec/disk.
[  165.842465] md: using maximum available idle IO bandwidth (but not more than 12 KB/sec) for resync.
[  165.842472] md: using 128k window, over a total of 119499392 blocks.
[  165.874567] md: bind<dm-9>
[  165.888945] md: bind<dm-10>
[  165.912539] md: bind<dm-11>
[  165.912734] md: md3: raid array is not clean -- starting background reconstruction
[  165.916156] raid5: device dm-11 operational as raid disk 2
[  165.916161] raid5: device dm-10 operational as raid disk 1
[  165.916165] raid5: device dm-9 operational as raid disk 0
[  165.917252] raid5: allocated 3180kB for md3
[  165.917255] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[  165.917260] RAID5 conf printout:
[  165.917262]  --- rd:3 wd:3
[  165.917264]  disk 0, o:1, dev:dm-9
[  165.917267]  disk 1, o:1, dev:dm-10
[  165.917269]  disk 2, o:1, dev:dm-11
[  165.917581] md: resync of RAID array md3
[  165.917589] md: minimum _guaranteed_  speed: 12 KB/sec/disk.
[  165.917593] md: using maximum available idle IO bandwidth (but not more than 12 KB/sec) for resync.
[  165.917600] md: using 128k window, over a total of 119507392 blocks.
[  165.917915] md: couldn't update array info. -22
[  165.918914] md: couldn't update array info. -22
[  165.919116] md: couldn't update array info. -22
[ 1665.168028] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1665.302519] usb 2-2: configuration #1 chosen from 1 choice
[ 1665.304101] usb 2-2: New USB device found, idVendor=0ea0, idProduct=2168
[ 1665.304107] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1665.304111] usb 2-2: Product: Flash Disk      
[ 1665.304114] usb 2-2: Manufacturer: USB     
[ 1665.304117] usb 2-2: SerialNumber: 4424F71F3D8970EC
[ 1665.687786] usbcore: registered new interface driver libusual
[ 1665.699104] Initializing USB Mass Storage driver...
[ 1665.699594] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1665.700405] usb-storage: device found at 2
[ 1665.700410] usb-storage: waiting for device to settle before scanning
[ 1665.700452] usbcore: registered new interface driver usb-storage
[ 1665.700458] USB Mass Storage support registered.
[ 1670.701852] scsi 4:0:0:0: Direct-Access     STF      Flash Disk 2.0   2.00 PQ: 0 ANSI: 2
[ 1671.764696] ready
[ 1671.765084] sd 4:0:0:0: [sdd] 256000 512-byte hardware sectors (131 MB)
[ 1671.765704] sd 4:0:0:0: [sdd] Write Protect is off
[ 1671.765708] sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 1671.765712] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 1671.767327] sd 4:0:0:0: [sdd] 256000 512-byte hardware sectors (131 MB)
[ 1671.768711] sd 4:0:0:0: [sdd] Write Protect is off
[ 1671.768716] sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 1671.768719] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 1671.768726]  sdd: sdd1
[ 1671.769810] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 1671.770009] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1671.770745] usb-storage: device scan complete
[ 1727.774798] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!