X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: Simply GNU/Linux 5.0.0 RC2 (Billy) i686 Current Operating System: Linux olia.home 2.6.27-ovz-smp-alt9 #1 SMP Tue Aug 18 09:28:44 UTC 2009 i686 Build Date: 12 October 2009 08:23:12AM Before reporting problems, check https://bugzilla.altlinux.org/ to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 1 19:37:03 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Minimal layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0|0" (**) | |-->Device "Card0|0" (**) Option "AllowMouseOpenFail" "true" (**) Option "AutoAddDevices" "true" (**) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: catalogue:/etc/X11/fontpath.d (==) ModulePath set to "/usr/lib/X11/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x1bc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0:1:0:0) 1039:6351:1558:0722 Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) Executed /usr/libexec/X11/drv.d/x11 (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "freetype" (WW) Warning, couldn't open module freetype (II) UnloadModule: "freetype" (EE) Failed to load module "freetype" (module does not exist, 0) (II) LoadModule: "glx" (II) Loading /usr/lib/X11/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/X11/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dbe" (II) Loading /usr/lib/X11/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/lib/X11/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dri2" (II) Loading /usr/lib/X11/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "sisimedia" (II) Loading /usr/lib/X11/modules/drivers/sisimedia_drv.so (II) Module sisimedia: vendor="X.Org Foundation" compiled for 7.4.0, module version = 0.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340, [M]670/[M]770[GX], [M]671/[M]771[GX] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), Volari V3XT/V5/V8/Duo (XG40/XG42) (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for sisimedia (--) Assigning device section with no busID to primary device (--) Chipset [M]671/[M]771[GX] found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 7.4.0.0) (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer and others (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml (II) SIS(0): *** for documentation, updates and a Premium Version. (II) SIS(0): RandR rotation support not available in this version. (II) SIS(0): Dynamic modelist support not available in this version. (II) SIS(0): Screen growing support not available in this version. (II) SIS(0): Advanced Xv video blitter not available in this version. (II) SIS(0): Advanced MergedFB support not available in this version. (--) SIS(0): sisfb not found (--) SIS(0): Relocated I/O registers at 0x9000 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) SIS(0): Depth 24, (--) framebuffer bpp 32 (==) SIS(0): RGB weight 888 (==) SIS(0): Default visual is TrueColor (WW) SIS(0): Could not find/read video BIOS (**) SIS(0): Option "ForcePanelRGB" "18" (**) SIS(0): Option "MergedFBAuto" "on" (**) SIS(0): Option "CRT2Position" "Below" (**) SIS(0): Option "MetaModes" "1680x1050-1280x800 1440x900-1280x800 1280x800-1280x800 1280x800 1024x768 800x600 640x480" (**) SIS(0): Option "MergedXineramaScreen0" "right, top" (**) SIS(0): Option "MergedNonRectangular" "on" (==) SIS(0): Using XAA acceleration architecture (==) SIS(0): Color HW cursor is enabled (II) SIS(0): Using VRAM command queue, size 512k (==) SIS(0): Hotkey display switching is enabled (==) SIS(0): SiSCtrl utility interface is disabled (II) SIS(0): For information on SiSCtrl, see http://www.winischhofer.at/linuxsispart1.shtml#sisctrl (**) SIS(0): LCD panel color depth is 18 (==) SIS(0): X server will not keep DPI constant for all screen sizes (==) SIS(0): DRI enabled (--) SIS(0): 131072K shared video RAM (UMA) (--) SIS(0): DRAM type: DDR SDRAM (--) SIS(0): Memory clock: 596.582 MHz (--) SIS(0): DRAM bus width: 64 bit (--) SIS(0): Linear framebuffer at 0xC0000000 (--) SIS(0): MMIO registers at 0xD4000000 (size 64K) (--) SIS(0): VideoRAM: 131072 KB (II) SIS(0): Using 20480K of framebuffer memory at offset 0K (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1) (--) SIS(0): No CRT1/VGA detected (--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [ec2305]) (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) (II) SIS(0): CRT1 gamma correction is enabled (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled (II) SIS(0): CRT2 gamma correction is enabled (II) SIS(0): CRT1 not detected or forced off. MergedFB mode disabled. (--) SIS(0): Memory bandwidth at 32 bpp is 1193.16 MHz (--) SIS(0): Detected LCD PanelDelayCompensation 0x06 (for LCD=CRT2) (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1) (--) SIS(0): 302LV/302ELV: Using EMI 0x6a0d7038 (LCD) (--) SIS(0): crtno 1 CRT2 realcrtno 1(--) SIS(0): CRT2 DDC probing failed (==) SIS(0): Min pixel clock is 10 MHz (--) SIS(0): Max pixel clock is 340 MHz (II) SIS(0): Replaced entire mode list with built-in modes (II) SIS(0): Correcting bogus CRT2 monitor HSync range (II) SIS(0): "Unknown reason" in the following list means that the mode (II) SIS(0): is not supported on the chipset/bridge/current output device. (II) SIS(0): Monitor0|0: Using hsync range of 30.00-80.00 kHz (II) SIS(0): Monitor0|0: Using vrefresh range of 56.00-75.00 Hz (II) SIS(0): Clock range: 10.00 to 340.00 MHz (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1400x1050" (unknown reason) (II) SIS(0): Not using default mode "1400x1050" (unknown reason) (II) SIS(0): Not using default mode "1280x800" (hsync out of range) (II) SIS(0): Not using default mode "1440x900" (unknown reason) (II) SIS(0): Not using default mode "1440x900" (unknown reason) (II) SIS(0): Not using default mode "1440x900" (unknown reason) (II) SIS(0): Not using default mode "1366x768" (unknown reason) (II) SIS(0): Not using mode "1680x1050" (no mode of this name) (II) SIS(0): Not using mode "1440x900" (no mode of this name) (--) SIS(0): Virtual size is 1280x800 (pitch 1280) (**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 135.2 MHz, 80.1 kHz, 75.1 Hz) (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 78.7 MHz, 60.0 kHz, 75.0 Hz) (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 49.5 MHz, 46.9 kHz, 75.0 Hz) (**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 31.5 MHz, 37.5 kHz, 75.0 Hz) (**) SIS(0): Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz) (**) SIS(0): Default mode "1024x768" (1024x768) (For CRT device: 75.2 MHz, 56.6 kHz, 70.2 Hz) (**) SIS(0): Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz) (**) SIS(0): Default mode "800x600" (800x600) (For CRT device: 50.1 MHz, 48.2 kHz, 72.4 Hz) (**) SIS(0): Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz) (**) SIS(0): Default mode "800x600" (800x600) (For CRT device: 36.1 MHz, 35.2 kHz, 56.3 Hz) (**) SIS(0): Default mode "640x480" (640x480) (For CRT device: 31.5 MHz, 37.9 kHz, 72.8 Hz) (**) SIS(0): Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz) (==) SIS(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/X11/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/X11/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) SIS(0): 2D acceleration enabled, modename xaa (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/X11/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/X11/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) SIS(0): initializing int10 (II) SIS(0): Primary V_BIOS segment is: 0xc000 (II) SIS(0): VESA BIOS detected (II) SIS(0): VESA VBE Version 3.0 (II) SIS(0): VESA VBE Total Mem: 131072 kB (II) SIS(0): VESA VBE OEM: SiS (II) SIS(0): VESA VBE OEM Software Rev: 1.0 (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp. (II) SIS(0): VESA VBE OEM Product: 6330 (II) SIS(0): VESA VBE OEM Product Rev: 3.72.8B (II) SIS(0): Setting standard mode 0x16 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) SIS(0): [drm] Using the DRM lock SAREA also for drawables. (II) SIS(0): [drm] framebuffer handle = 0xc0000000 (II) SIS(0): [drm] added 1 reserved context for kernel (II) SIS(0): X context handle = 0x1 (II) SIS(0): [drm] installed DRM signal handler (II) SIS(0): [dri] Video RAM memory heap: 0x1400000 to 0x7f70000 (110016KB) (II) SIS(0): [dri] handle = 0xd4000000, size = 65536 (II) SIS(0): [drm] AGP enabled (II) SIS(0): [drm] Allocated 32MB AGP memory (II) SIS(0): [drm] Bound 32MB AGP memory (II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22) (II) SIS(0): [dri] Visual configs initialized (II) SIS(0): Framebuffer from (0,0) to (1279,4094) (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Solid Lines Dashed Lines Setting up tile and stipple cache: 32 128x128 slots 26 256x256 slots 7 512x512 slots 32 8x8 color pattern slots (--) SIS(0): CPU frequency 2000.44Mhz (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods: (--) SIS(0): Checked libc memcpy()... 135.4 MiB/s (--) SIS(0): Checked built-in-1 memcpy()... 301.9 MiB/s (--) SIS(0): Checked built-in-2 memcpy()... 135.7 MiB/s (--) SIS(0): Checked MMX memcpy()... 311.9 MiB/s (--) SIS(0): Checked SSE memcpy()... 302.6 MiB/s (--) SIS(0): Checked MMX2 memcpy()... 312.6 MiB/s (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM (==) SIS(0): Backing store disabled (==) SIS(0): Silken mouse enabled (II) SIS(0): DPMS enabled (--) SIS(0): Hardware supports one video overlay (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT2 (II) SIS(0): Default Xv adaptor is Video Overlay (II) SIS(0): [DRI] installation complete (II) SIS(0): Direct rendering enabled (WW) SIS(0): Option "UseSSE" is not used (II) SIS(0): Initialized SISCTRL extension version 0.1 (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (EE) AIGLX error: dlopen of /usr/lib/X11/modules/dri/sis671_dri.so failed (/usr/lib/X11/modules/dri/sis671_dri.so: cannot open shared object file: No such file or directory) (EE) AIGLX: reverting to software rendering (II) AIGLX: Loaded and initialized /usr/lib/X11/modules/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/X11/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.2.6 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Chicony USB-PS/2 Combo Keyboard (**) Chicony USB-PS/2 Combo Keyboard: always reports core events (**) Chicony USB-PS/2 Combo Keyboard: Device: "/dev/input/event6" (II) Chicony USB-PS/2 Combo Keyboard: Found keys (II) Chicony USB-PS/2 Combo Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Chicony USB-PS/2 Combo Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event5" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0 (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) Chicony USB-PS/2 Combo Keyboard: Close (II) UnloadModule: "evdev" (II) Logitech USB-PS/2 Optical Mouse: Close (II) UnloadModule: "evdev" (II) SIS(0): [drm] Freeing AGP memory (II) SIS(0): [drm] Releasing AGP module (II) SIS(0): [drm] removed 1 reserved context for kernel (II) SIS(0): [drm] unmapping 8192 bytes of SAREA 0xf8cc2000 at 0xaf7ae000 (II) SIS(0): [drm] Closed DRM master. (II) SIS(0): Restoring by setting old mode 0x47 (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb77b0000,0x10000] (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xaf7b0000,0x8000000]